Radeon962

Sorry, shipping in the US only. Bill

Couple of PM's about the Bassara. It is a "Stiff" flex as the pictures shows. Bill

Adams RPM Tour Prototype 14.5º with the stock Aldila NV 75 "S" (for Adams) with an Adams velvet grip. All stock Adams. Head sits very square to slightly open at address. This is the retail version of the Adams Tour Prototype 4060. The 4060 signifies a head that is for use 40% off the tee and 60% off the fairway or a mid-deep face height. The head has "Tour Prototype" on the sole and the paint break on the hosel with no serial number. Weight is in the center of the sole as compared to the other two Adams models with the weight back or in the heel. This head is setup for a neutral and lower ball flight. Overall the head has light wear on the face and sole. Top has no dings or nicks, but does have some light scratches in the clear coat and a couple of "smudge" type marks. I mention them as you can see them when you hold the head close to your face in direct light, but at address you don't notice them and the head looks just fine at address. Sorry I don't have the original headcover. Looking for $160 Paypal'd and shipped. $150 - BRAND NEW and unused Fujikura Tour Spec Speeder 569 "Stiff" flex. Shaft has never been used and I decided to stick with the Diamana that I have. These sell new for $225 on a couple of the other sites and $125 as pullouts, so get a new one for nearly the same price as a pullout. Length - 46" Diameter - 0.335" Tipping - NONE Tip Prep - NONE $100 - Mitsubishi Bassara 63 "Stiff" - one time pull. Shaft was purchased brand new and I used it for a demo session at the range, but prefer a stiffer shaft. These sell new at Golfworks for $150. Length - 43 7/16" Diameter - 0.335" Tipping - 1" Tip Prep - 1 3/8" Brand new Scotty Cameron Studio Design Concert T-Shirt in "XL" size. ***SOLD*** Email me at: [email protected] for pictures, questions or offers. I will be listing these here and a couple of the other sites so you will also be able to see pictures there. eBay ID is DCI86 if you want to check references. Thanks, Bill

For Sale or Trade: 1. Used Tour Issued Adams Ovation Strong 3 wood with a professionally installed Graphite Design Tour AD M-85 "Stiff" flex graphite shaft at 42.75" with a Golf Pride Tour Velvet grip. I don't know much about the shaft other than it is not one you will find very easily and is supposed to be one of the best fairway wood shafts by Graphite Design in the Tour AD line. They don't come cheap as the Tour AD line is Graphite Design's high end shaft line. Logo is down on the shaft and grip. Swingweight right around D3. Shaft was tipped 1/2". Sole has "Tour" stamped on it. NO serial number on the hosel. 0.335" hosel diameter. I had listed this one for sale previously with a different shaft, but wanted to try out the Tour AD shaft, but it is still not the combo for me. I guess I don't have a "Tour Swing". Overall in nice condition. Paint is in good shape with two small paint chips on the top out towards the toe (you need to hold the head close to your face to see them). Some scratches also out near the toe where the paint wraps around from the top and meets the face compliments of a range ball high off the face. Neither of these were anything that I noticed at address, but if you look at your clubs like I do you can see them when inspecting the head close up. Face and sole show normal marks from use with no dings. Ovation 3 headcover included in nice shape. Trades will be considered. If you prefer a cash deal (Paypal is preferred) then I would be looking for $150 Paypal'd and shipped. Get the whole club for near what you may have to pay for the shaft itself. 2. Lightly used Tour Issued Satin Cleveland CG10 "T Stamp" 54º 2-dot HEAD ONLY. "T" stamp on the hosel to designate Tour issued and also in the CG10 line to designate that it is a 588 style CG10 head. 0.355" taper tip hosel. NO relief along the trailing edge of the sole and the head is shaped like the Cleveland 588 head rather than the rounded toe of the CG10 series. Apparently, Cleveland wedge users on the Tour wanted the benefits of the CMM metal, but preferred the look of the 588 wedge head so Cleveland produced the "T" stamped CG10 wedges to satisfy their PGA players. The head itself is in excellent condition with no big dings or nicks. Just some light wear here and there. The face shows minimal wear from use. The grooves are still wide and deep. Head weighs 301g +/-. I would prefer a cash deal (Paypal preferred) but will consider trade offers. Looking for $110 Paypal'd and shipped. Email me at: [email protected] for offers, questions or pictures. Thanks, Bill

All sold. Thanks, Bill

J33 head is now SOLD. Tour Ovation has been reshafted and is back in the rotation for further consideration. MX-23's still available, but going to eBay on Sunday. Bill

Thanks for the input. I now have it in a Tour Ovation head and hope to get it out to the simulator in the next week as we are in the midst of a cold spell here in Michigan. Bill

Anyone else ever tried it? JK, I thought you deemed it one of the best fairway shafts around? Bill

X18PS arrived today, so price drop to $380 on the MX-23. Thanks, Bill

Looking for some information on a Graphite Design Tour AD M-85 in "Stiff" flex. I checked the GD website, but it is not listed there and I thought the "M" series was a Tour shaft. Not sure on that, but I'm sure someone here will know. I'm really looking for playing characteristics of the shaft. What other shaft might it be comparable to? I am familiar with a lot of the Fuji's (Speeders, ZCOM, etc.), Aldila NV/NVS, Graphite Design YS and PI series. Considering the shaft primarily for a 3 wood so I would also be interested in tipping info for a 3wood at standard length and how it may have worked for others. Info on my swing: SS 110-112mph, smooth tempo, don't load the shaft a ton as the transition from the top is pretty easy. Best fit I have found so far in a driver is a NV 55 "S" tipped 1.5". "X" flex untipped works OK, but the tipped "S" is just slightly softer in feel and a better launch. Have been playing DGX100 in all of my fairways for the past 3 seasons as I have not found a graphite shaft that I really care for in a 3 wood yet which has included: * 771TA "X" untipped * NV 85 "S" tipped 1.5" * NV 85 "X" untipped and tipped 1/2" * NVS 75/85 "X" tipped 1/2" and 1" (NVS "X" tipped 1/2" depending on bore depth seems to be about the best fit) * 757 "S" untipped, tipped 1/2" * Pro 95 "S" * Fuji Six "X" untipped (this one actually was very nice feeling, but too high flight) * HK Pro 80 "S" not sure of tipping on this one, but too loose * 869 "S", again not sure on tipping , but very loose Probably some others that I forgot about, but you get the drift as far as shafts to compare it to if possible. Might all be for naught, as I will probably end up with a VS Proto once they get released and figure out the flex and tipping for it. Thanks, Bill

Price drop on the Adams. Bill

Price drops on the fairways. Thanks, Bill

Price drops on all as there has been some tire kickers, but no takers yet. Thanks, Bill

1. Mizuno MX-23 3-PW TT Dynalite Gold S300 - $380 Very nice set of Mizuno MX-23 3-PW irons with True Temper Dynalite Gold S300 steel shafts. Mizuno velvet grips and matching serial numbers on the ferrules. All standard loft, lie and length. Overall, in very nice condition with no big dings or nicks. Some small marks here and there from use and slight bag chatter, but at address they look excellent. No chrome loss or wear on any of the faces or heads. 2. TOUR Adams Ovation Strong 3w *** RESHAFTED and back in the bag for more testing*** 3. Bridgestone J33 3w (15º) ***SOLD*** Email me at: [email protected] for pictures, offers or questions. Thanks, Bill

Paypal sent earlier today after your confirmation. Let me know when it goes out and forward any tracking info. Thanks, Bill