bruinduke

I hope everyone had a good Thanksgiving. I'd like to sell a few extra accessories that I have lying around. Will only sell as a bundle at this time to save on postage. Epon mesh zipper headcovers 5-PW. The zipper on the 7 iron has come off track, but if you (or your wife) is crafts oriented perhaps you can get it back on track. Crazy Driver headcover-cover is magenetic and combo suede like material with faux carbon weave on the side. It reads "Longest Yard" and "TJ-46" on the respective side. Gold's Factory Headcover. I think these were supposedly made from kimonos, but not sure on that one. In any event it's been sitting unused in the plastic container I bought it in. SOLD, thanks for all the interest

One more try to move this: $400 seem fair? Too many driver choices otherwise this would be a keeper.

Thanks for the confirmation guys. I thought I wasn't in touch with the market. If I can't move at this price, I'll just put it back in the rotation.

For those that asked the shaft is after-market first time install. What's the market for these drivers? $460 obo enough of a price drop to get it done?

Price drop: $520 obo?

Okay I've decided I prefer non deep face drivers and as such shopping my Syard XV. It's 10.5* and in very good condition. The pics were taken today and the face was captured pretty well. The head has a few pin prick marks that were sharpied in and you can make them out in the pictures, but nothing I even notice at address. The graphite design Tour-AD-DI 6 works well with this head. I feel a little more consistent with my Titleist 910 so shopping this around. Driver comes with matching headcover. Asking $600 obo. Always open to trade, but most of my bag has been set. That doesn't stop me from tinkering if you have an interesting fairway or romaro type V or H irons, or wedges with some interesting sole grinds. Please pm me with any questions or offers. Salamat.

I have 5-pw of the old mesh and zipper model, but I think the zipper on the 7 has come off track. If you're handy you might be able to fix. I sold my epon irons so I am not in a hurry to use.

Can I ask what was the sale price? Hopefully buyer plays it forward if it doesn't work out...

Looking to experiment with a first generation PRGR Egg 13*. If you have one please pm me your asking price or even trade interest. Thanks

After some deliberation I've decided to sell or trade my S Yard T.388 10.5* driver. If I had the time and resources to find the right set up for this head I would keep it, but I don't have the patience. It currently has an Oban Kiyoshi purple 65 stiff flex shaft. Plays to 44.75. Without the lead tape seen in the pictures it's about C6. With the lead tape about D1. Those with a consistent swing and that can find the center of the club face will be rewarded by one of the better drivers on the planet. On the few times I stumbled into center face hits, you can feel the ball compress and trampoline off the face. The surprising part is that the head has a medium flat trajectory that surprises you how far you've actually hit the ball. The head was purchased from a good member of the board (matching headcover included) and the shaft was a first time install into the head. There are some scratch marks along the sole and along the bottom of the face that were there when I bought the head. Nothing visible at address, but I try to be as thorough as I can in descriptions. headed to TX, thanks KB. As far as trades I am interested in trying Romaro fairway woods and maybe hybrids. Also looking for an original PRGR egg in 13*, new tight lies fairway woods, or other interesting 3-5 wood. Would also be open to a Titleist 912U 3 iron. Although I shouldn't be I am open to driver trades such as Ryoma, Romaro, Jbeam 425 or 435, or other drivers on the board with a smooth stiff-regular to stiff shaft. I guess that makes me pretty much open to most trades except for irons and wedges. Thanks for looking and please just pm to discuss.

Looking for a shaft pull. Something higher launching and at least 44 inches in length (before installling in driver) to try in my s yard 388. Looking for something in stiff regular to stiff flex. Please pm me if you have a shaft you're trying to move. Thanks

Some great advice here. Sounds like its going to get expensive. Does anyone know the hosel depth? And anyone having luck playing the head at less than 45 inches?

I recently picked up a 388 head. It's on the lighter side at 196ish grams and only gets to about C6 in a 65 kiyoshi just short of 45 inches. Has anyone had any luck reshafting a 388? If so, what shaft and length has maximized carry and roll? I usually prefer a 44.5 inch driver, but at this head weight I would have to add some lead tape to get to D2+.

PM sent with interest...

913 sold

Picked up a couple drivers and then rolled my ankle before I got a chance to do a shootout. Trying to thin out the herd to limit my confusion and to keep me from rushing back too soon to hit them before I hit them. I found a very good conditioned U design Callaway Rax Fit at my local shop. Yellow and black sole coloring on the bottom. Top is very glossy and face does not show much use. The shaft is an aftermarket ion Diamana 'ahina 70 x5ct stiff flex. I am very tempted to hit this, but I want to concentrate on the TaylorMade or Titleist shafts I already have. I don't have a callaway tool, but I hear other brands work. The head is currently set in the "C" or closed position. Club was measured at 44.75. Asking $200 obo. I just picked this up from a buddy on the board, before the trade, I also picked up a few other drivers so I need to thin the heard. Nice condition 913 D3 9.5* with aftermarket graphite design Tour AD-DI6 stiff and aftermarket adapter. I was told that the shaft measures 44 1/8th inch and 45 1/8 in the 913 head. My friend assured me that all the settings work and I don't have any reason to doubt him. Matching headcover included, but no wrench. Asking $400 obo. Not too saddened if I can't move the clubs and they are still around when I am able to hit balls again. Please pm me with any questions or offers.

Why the hate fest for a dissenting opinion? If I said I prefer seemore dots to aid alignment instead of a sightline or a black pvd finish instead of satin I'd hope I wouldn't get flamed. Seems pretty childish.

So Tae, what are you playing now? I want to get in line for the next sale, lol.

Okay I know this is a longshot but if anyone has a 4 iron or "x" iron cover from the Epon mesh style iron covers, please just pm me if you would like to sell.

Contemplating a sale of my Ryoma Vspec 10.5 with Diamana Stinger 60 stiff shaft. The stinger is from the first release and reviews say its the easier to hit. I've never hit the re-released stinger, but this one is ultra smooth. The club plays just under 45 inches (about 44.75 depending how measured). Swingweight should be D3 (requested when putting the combo together), but I never put it on the scale to make sure. The shaft is in good shape with only a finish chip just above the head. The head is fairly well played with brush marks along the sole, hit marks along the face. One paint chip on the topline from a 3 wood contact on a bumpy cart ride. Sigh. The head was bought from a legendary trusted member from the board. The shaft was acquired through Yahoo Japan. The driver is definitely meant to be gamed and not collected. Asking $750 or best reasonable offer. As for trades might consider romaro irons, epon personal, Yamaha 2013 tour irons, or JDM wedges like the s yard bold. Also very much looking for a driver with a purple oban kiyoshi in stiff flex. SOLD!!!

Honma perfect switch?

Getting some interesting trade offers, but would very much like to raise Paypal funds for future purchases. Traded!

WTS 2013 OnOff Forged irons 5-PW with UST Recoil shafts. I would very much like to keep them, but I find I feel a bit disconnected at contact. These beat my Epon Type J/Recoil combos on looks, forgiveness, distance and ease of use, but I give the nod to the Epon at feedback at impact. 5-PW with UST Recoil 125 F4 (stiff) professionally built by TourSPX division of UST Mamiya. Very soft forging with milled face. 5 and 6 have not been hit often, and the rest of the irons are still in excellent condition given their use. Endo forged in Japan. The irons are built off a 37.75 inch 5 iron and are weighted to play D3-D4. Iomic sticky grips have a lot of life left in them. Asking $1250 obo. Always willing to consider trade talks, although I am pretty happy with my Epon/Recoil irons. I haven’t tried the Romaro H or V irons so open to ideas. I would also consider the Yamaha Inpres 2013 irons. I am a convert to the feel of Recoil shafts so more inclined to give irons with those shafts a go. Also consider Stinger pulls, Epon Zen, Yamada putters in copper, and perhaps other napa/8802 or flow neck putters. Please just pm to discuss. Thanks for looking. Closeup face pics are of the 5 iron and PW. As you can tell these clubs were babied.

I've got a Royal Collection TRC (twin rail cavity) 14* with designed by graphite design tour ad 75 stiff flex if interested.

I have my eyes on a few things on bst so I need to move these. Asking $280 for 3 wood and $250 for the hybrid, or $500 for both. These are pending...