turbodog

Not really closed as best as I can recall. It's probably how I was setting them up on the floor while trying to take a good pics of them. Tough to hold the driver while taking pics, ya know. optical illusion. put any two drivers next to each other and the one on the left will look closed.

you can try Putter Around in broward - they do good work there and have a launch monitor/fitting area. they don't buy into all the spining/flo stuff though, so don't expect any of that from them. they do good clean work. in miami there used to be the van that set up at the doral range - cmd? not sure if they are still there or not. they are expensive but have a good reputation for doing good work with all the latest info. plus they can do fittings on an outdoor range.

T and S series both are in 400cc. Joe :cool: Got to see both earlier yesterday and even though both are 400cc but they are proportionally sized differently. I have few pics and will post it at a later date if someone here requests it. I hit the 905T and it's very likely that it might make into my bag when I can get it with my specs. um... what club ISN'T likely to make it into your bag? ;-)

i had thought the same... but in recent weeks i've seen gary koch and david toms doing interviews holding the driver, and you could clearly see the white writing on the toe. it was too hard to tell if there was a 460 on the hosel or not though...

i watched on tivo, definitely saw the blue oval graphic for the diamana on the underside of the shaft.

just swingweighted them. on my scale they are all -exactly- D2.5 except for the PW which is D4.

chanced upon these and thought i'd pass them along. this is a set of 2-PW of tour 300 forged irons in great shape. there's no major face wear, great grooves and chrome, and only what looks like maybe 10 rounds of use on them. the only major wear is a ding high on the face of the 9 iron - does not affect play, just off to the side of the grooves on the toe. there are some marks from loft and lie adjustments it looks like - but nothing major. the 2 iron is the only one with the 2mm stamp but these were all built and delivered as one set. i am not an expert on 2mm offset, but it appears like it's progressive - the longer irons have more and the shorter irons have a little less offset or maybe it's just an optical illusion from the loft...? no serial number on 5-iron of course. the shape of the bottom of the cavity is slightly different when compared to the retail 6 iron that i have. normal round toe, not box toe. they have newly installed s300s w/ v55 grips, also new... i can provide pics ... $650 obo - trades welcome... i'd be interested in a retail 8.5 launcher comp w/ nv 65x or 75x plus cash. don't need 3 woods or irons or wedges. a yes! callie plus cash maybe.

8/10 or better condition - i don't care about rust or chrome wear, but the grooves need to be good and no major dings.

yep, deal pending!!

great shape, 8/10, no paint chips or paint scratches of any visible kind. sole marks. here are your options (all prices include shipping, paypal only, lower 48 only): - head only - $200 - as currently assembled with very rare and expensive fuji 671te tour spec in untipped X, spined, flo’d 44.5” playing length - $325

sonartec ss-07 14*, with proto nv 95 stiff tipped 1". good condition except for a small nick on the paint on the hosel and pin point things on the toe that were touched up and polished and not visible at address. $145 shipped ground. generic headcover included.

great condition, 8.5/10, no paint chips or paint scratches of any visible kind. light sole marks. 4 grams of cotton stuffed inside to make it sound even more solid. here are your options (all prices include shipping, paypal only, lower 48 only): - head only - $200 - as currently assembled with very rare and expensive fuji 671te tour spec in untipped X, spined, flo’d 44.5” playing length - $345 - with fuji fit-on pro 80 x or fuji sapphire (tour only shaft) x (installed or just in the box) for $300.

fit on pro 80 x, untipped, ~44" one time pull, $105 fit on sapphire x, tour only shaft, ~43.5" one time pull, $105

hmm... i could take the 3-8 for the right price.. PM me if you are interested in doing as Howie suggests.

sending pm...