johnnypro

Looking for a NC Milled Series #4 (heel-shaft, half-mallet). Prefer 34" or shorter. Anybody? :tsg_smilie_whistle:

Selling a nice (8/10) Ping M/B 54* wedge from WRX department. Has special "T" grind - metal was ground from heel and rear of sole. Note "T" stamp on toe. Makes it a very versatile wedge. Standard length, ZZ-Lite, Tour Velevet round. Color code is brown but can be easily bent. $60 shipped. Paypal or USPS m.o.

Looking for a nice set of Slingshot Tour irons. Don't really need a 3-iron, set starting with the 4 is perfectly OK. Heads only are OK (actually preferred) and the flatter the better. Can trade nice Ping i3+ "combo" set (3 - 7 are standard i3+, 8 - SW are I3+ blade). Brown dot (3* flat) but can be bent 2* - 3* upright. Anybody?

I have a Fuji Speeder 857 Pro Ti stiff that I want to put in my Exotics 13* 3-wood. The shaft is a pull. It measures 45" butt-to-tip and the first 3" or so of the tip are "prepped." Question is how do I have my clubmaker trim this shaft from both butt and tip to make it play 43" and stiff BUT NOT LIKE A LEAD PIPE in my 3-wood? Is it OK for part of the prepped area to be exposed (above the ferrule)? I'm 55 and my driver swing speed (Cleveland Comp Tour with Fuji Tour Platform 27.3, stiff) is 100 - 105mph. Any thoughts greatly appreciated?

prefer 10.5 but will consider 9.5.

Thanks for the quick response, Chris. Does the standard face angle on the 505 also measure 1.5* closed? Can one be ordered with a square to open face? Thanks, John

I see TSG selling a Srixon W-505 driver (looks beautiful!) but the Srixon website features a W-506 (no mention of the 505 at all). Can anybody tell me the differences between these models? I noticed in the 506 specs that the 9.5* has a standard face angle closed 1.5* (a turn-off for a hooker like me). Any thoughts greatly appreciated, as always.

Will pay $600 for r7 425 TP head, 9.5 or 10.5.

Looking for a r7 425 TP, 9.5 or 10.5. Have NEW 9.5 SQ Tour + r510 TP 9.5 tour head (3B over Txxxxx s/n) to trade + cash. Send me PM's

Will trade: 1) BRAND NEW Nike SQ TOUR, 9.5, ProLaunch, stiff + 2) r510 TP TOUR head only, 9.5*, "3B over Txxxxx" Serial Number, perfect crown - no marks, with r500 series headcover + CASH for r7 425 tp, 9.5 or 10.5

Yes, as long as it's really a "TP"...TP graphics on the toe, half loft underlined, etc. If so, send me a PM. Thanks, John

Looking for r580xd tp in 9.5 or 10.5. Head only OK. Reasonable. :tsg_smilie_wink:

Other than the 757, does Fuji make any shafts with .350 tips? What about other top-of-the-line shaft manufacturers? Thanks!

SOLD!

Selling a TM r5 TP head in 9.5* loft. No pix but easily 9/10 condition. Has a 2g and a 10g. Wrench included. Will throw in a used 45" GD YS6, stiff (old graphics) that was pulled from another club (.335 tip). $275 shipped. Paypal. Will trade ONLY for (Good luck!!) Ping S59 8, 9, & PW, orange or brown dot.

Selling a brand new Sonartec ss-02 5-wood (19*). Stock Sonartec shaft in stiff flex. Headcover. $79 shipped, o/b/o.

Selling a brand new (in plastic wrapper) Graphite Design Purple Ice shaft in stiff flex. This shaft has a .350 tip. Retails in GolfWorks for $109.99. $59 shipped. Paypal.

Thanks for your help guys!! :smile1:

My son started with golf when he was about 12. Not being a pro myself I taught him the basics as best I could and he actually seemed to be developing quite well. He was erratic of course but his swing looked fundamentally pretty sound and he could hit it a long way for a kid his size (he's not that big). Good enough to make the high school team 3 years in a row. The problem is he seems to have lost his game a little over the past year or two. He's lost distance throughout the bag and can't seem to get the ball up in the air with the driver (hits a lot of low snap hooks). He used to have a nice finish with all the weight on the left side and belt buckle facing the target. Now he seems to fall slightly backward and away from the ball on almost every full shot. Both he and I were very frustrated not being able to get him back on track. He's now a freshman in college (away from home) and I'd like to hook him up with a good teaching pro here on Long Island for next summer. Any ideas??? We're strictly public course golfers - we don't belong to a private club. Sorry to ramble on but any ideas would be greatly appreciated - I don't want him to get so frustrated that he gives up on the game!

NEW only; .335 tip. Must be able to ship immediately. Anybody?? :whistle:

Selling a Cleveland Comp 9.5 Tour driver. Has "Txxxx" serial number on hosel. I rate the head 8.5/10. No pix. Pured NVS75, stiff Sell for $550 or trade ONLY for TM 10.5 r7 TP (must have "B" over "Txxxxx" serial number) with decent shaft. Wrench a plus.

Selling off a few miscellaneous items: Ping MB wedges, 56* & 60*, red dot, CS lite stiff, s/n's don't match but both very clean, 8.5/10. Would like to sell as a pair. Ping i3+ Blade SW, brown dot, CS lite, stiff, 8.5/10. Ping G2 Piper putter, 33", Blue Winn grip, easy 9/10. Cleveland LDI, 18*, NV85 stiff, easy 9/10. Any reasonable offer accepted. Will ship free to CONUS.

PM sent on Pings :love:

Never seen the 335 one, all 350 so far.Joe Thanks, Joe!

Here's an easy one: are tour Comp heads .335 bore or .350? Thanks.