gocchin Posted December 7, 2012 Report Share Posted December 7, 2012 <a href="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5501.jpg"><img'>http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5501.jpg"><img class="aligncenter size-full wp-image-21729" title="DSCF5501" src="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5501.jpg" alt="" width="648" height="248" /></a> Every year when November rolls around the excitement at Tourspecgolf builds for the announcement of the new Yamaha lineup for the upcoming year. It has turned into big event annually where many of our top customers and in the know golf enthusiasts queue up for the chance to pre order the new models. As we all know here the Limited Edition Tour Model irons are always the first to sell out typically even before launch. This year Yamaha kept the new models under a tight wrap, amazingly with no leaks as to what they even looked like. Last month when the models were finally revealed many were surprised to find this years V Forged Tour Model was now a blade and this years standard V Forged model was now a... wait what is it exactly? <a href="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5503.jpg"><img'>http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5503.jpg"><img class="aligncenter size-full wp-image-21730" title="DSCF5503" src="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5503.jpg" alt="" width="648" height="432" /></a> I'm reviewing the standard V Forged first as Yamaha has decided this year to not offer demos of the Tour Models since they are limited editions. Because of that we need to wait for our actual orders to come in so that we can review the Tour Model. In early November when Yamaha released pictures of the new V Forged, many people did indeed say "what is it exactly?" The V Forged has always been a superb all around, close to mid sized cavity back, aimed at the improving golfer and better player. The key is that is has always obviously been a cavity back. The new V Forged is quite a departure visually and design wise from all previous generations of the V Forged, and Yamaha does indeed refer to it as a cavity back. <a href="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5496.jpg"><img'>http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5496.jpg"><img class="aligncenter size-full wp-image-21733" title="DSCF5496" src="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5496.jpg" alt="" width="648" height="432" /></a> At first glance though, if anyone decides to call the V Forged a blade or muscle back, there probably aren't many who would disagree. Yamaha touts the V Forged as an aggressive cavity back or half cavity back model which we agree with. It has the lower portion of a cavity back which brings the center of gravity lower towards the sole yet the middle and top portion of the V Forged are very blade like. This top portion has a similar thickness to provide a consistent feel across the face. <a href="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5488.jpg"><img'>http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5488.jpg"><img class="aligncenter size-full wp-image-21737" title="DSCF5488" src="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5488.jpg" alt="" width="648" height="420" /></a> While the V Forged is touted as an aggressive cavity, it still retains the larger size of previous V Forged models. So if we are to consider this to be blade like, it does tread away from being a muscle back with its longer heel to toe length and wider sole. The toe is still high and reasonably squared off and the heel side of the face has actually been lowered to provide a sharper image. The leading edge is slightly rounded to help out with some ease of use especially in softer turf like we find here in Japan. <a href="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5490.jpg"><img'>http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5490.jpg"><img class="aligncenter size-full wp-image-21738" title="DSCF5490" src="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5490.jpg" alt="" width="648" height="432" /></a> Yamaha first used face milling on last years models and its back again this year though slightly tweaked in its patter. The score lines now feature a 3mm pitch interval and together with the face milling are said to increase the amount of spin and control. Yamaha irons which are forged from S20C at Endo have always had a great feel to them and with these new grooves and face milling, the impact feel seems enhanced ever so slightly, almost like a softer compression of the face perhaps from the additional bite. <a href="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5494.jpg"><img'>http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5494.jpg"><img class="aligncenter size-full wp-image-21739" title="DSCF5494" src="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5494.jpg" alt="" width="648" height="432" /></a> As with previous V Forged models, the sole is mid sized and and grinded to provide versatility and extra help for those who desire a clean entry and exit from various conditions. The grind helps the iron get under the ball consistently which helps result in great feel at impact. Its colder now and the ground is harder and the V Forged had no problems interacting with the turf and taking a nice clean divot along with very nice impact. <a href="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5492.jpg"><img'>http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5492.jpg"><img class="aligncenter size-full wp-image-21741" title="DSCF5492" src="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5492.jpg" alt="" width="648" height="432" /></a> Along with being larger than the Tour Model, the V Forged also has obvious offset. Its not terrible but very noticeable and for some a possible turn off. Otherwise it frames the ball quite well. The longer face makes for a wide hitting area and the top line is straight and reasonably thin. The V Forged is workable to an extent with easy draws and fades at command. Controlling trajectory is a bit harder as the weight is all quite low which makes for a slightly higher launch and good stopping power thanks to above average spin. <a href="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5506.jpg"><img'>http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5506.jpg"><img class="aligncenter size-full wp-image-21744" title="DSCF5506" src="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5506.jpg" alt="" width="648" height="432" /></a> Past generations of the V Forged have always been one of the most popular choices for improving players to even low handicappers thanks to their superb all around performance. The new model has retained all these characteristics, ease of use, above average distance (lofts are also strong), accuracy and control, and feel, even with radically changed visuals. I feel the new design has in fact improved the feel which is fantastic in this iron. In previous models the cavity got so low and perimeter weighted that it may have lost some of its pure feel. With the half cavity design or almost muscle like lower back, a more pure and soft but not mushy feel is evident, the kind that feels great but still give you enough feedback to know where the ball compressed on the face. While it is thickest in the middle, that lower muscle spans towards the toe and heel minimizing harsh feel on toe miss hits. Center strikes and those towards the toe feel very good and are rewarded with a strong trajectory and pretty much straight ball flight right at the pin. <a href="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5487.jpg"><img'>http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5487.jpg"><img class="aligncenter size-full wp-image-21747" title="DSCF5487" src="http://www.golftoimpress.com/wp-content/uploads/2012/12/DSCF5487.jpg" alt="" width="648" height="432" /></a> The Yamaha's are available with DG S200 and NS Pro 950GH and this year Modus3 is a no charge upgrade. The standard graphite shaft is the proven Graphite Design Tour AD 75 in a BB Blue color this year. Yamaha also offers a variety of upgrade shafts directly from the factory. You can check out the new Yamaha V Forged <a href="http://www.tourspecgolf.com/product_info.php?products_id=4639"><strong>here in the pro shop!</strong></a> Quote Link to comment Share on other sites More sharing options...
Ian-500 Posted December 7, 2012 Report Share Posted December 7, 2012 Lovely looking iron. I like the picture showing the half cavity from the toe end. Is there a chance that these will find a space in your bag for 2013 Tario? Quote Link to comment Share on other sites More sharing options...
rb2235 Posted December 7, 2012 Report Share Posted December 7, 2012 (edited) why would the sets with Modus have a 37.5 inch 5i and 37.75 on sets with NSPros? thanks Tario Edited December 7, 2012 by yourpressed Quote Link to comment Share on other sites More sharing options...
gocchin Posted December 7, 2012 Author Report Share Posted December 7, 2012 Lovely looking iron. I like the picture showing the half cavity from the toe end. Is there a chance that these will find a space in your bag for 2013 Tario? Its possible but I'm torn as always when it comes to what to play. Quote Link to comment Share on other sites More sharing options...
gocchin Posted December 7, 2012 Author Report Share Posted December 7, 2012 why would the sets with Modus have a 37.5 inch 5i and 37.75 on sets with NSPros? thanks Tario For swing weight purposes. Modus 3 balance is towards the tip so the slightly shorter length helps swing weight. Quote Link to comment Share on other sites More sharing options...
Duffer19 Posted December 7, 2012 Report Share Posted December 7, 2012 Besides the Tour AD75, what other graphite shafts would be offered as factory upgrades, T? Quote Link to comment Share on other sites More sharing options...
RIduffer Posted December 7, 2012 Report Share Posted December 7, 2012 (edited) Besides the Tour AD75, what other graphite shafts would be offered as factory upgrades, T? This link should have all the info you need about shaft options for the '13 Yamaha lineup... http://ebook.yamaha....atalog/?58009#0 But it looks like quite a list of graphite options: Fuji - Xcon and Motore UST Mamiya - Attas Mitsubishi - Diamana Thump, Bassara, Fubuki Roddio Edited December 7, 2012 by RIduffer Quote Link to comment Share on other sites More sharing options...
DaleUK Posted December 7, 2012 Report Share Posted December 7, 2012 Can you have these playing longer with modus3's?? I'm usually 1/2" longer than Std. Quote Link to comment Share on other sites More sharing options...
Ian-500 Posted December 7, 2012 Report Share Posted December 7, 2012 Can you have these playing longer with modus3's?? I'm usually 1/2" longer than Std. Tempted? Quote Link to comment Share on other sites More sharing options...
DaleUK Posted December 7, 2012 Report Share Posted December 7, 2012 Tempted? Very very... So much so, that the Epons have been taken off the list! 2 Horse race now! Quote Link to comment Share on other sites More sharing options...
gocchin Posted December 7, 2012 Author Report Share Posted December 7, 2012 Can you have these playing longer with modus3's?? I'm usually 1/2" longer than Std. Looking at around D4ish but yeah *0.5" can be done. Quote Link to comment Share on other sites More sharing options...
gian11 Posted December 8, 2012 Report Share Posted December 8, 2012 T, would you be able to compare the head size vs ONOFF 2013? Quote Link to comment Share on other sites More sharing options...
RIduffer Posted December 8, 2012 Report Share Posted December 8, 2012 Very very... So much so, that the Epons have been taken off the list! 2 Horse race now! The '09 ONOFFs are in the lead of the 2 horse race, right? Quote Link to comment Share on other sites More sharing options...
DaleUK Posted December 8, 2012 Report Share Posted December 8, 2012 Looking at around D4ish but yeah *0.5" can be done. T Can these be soft stepped once? Also ( and I forgot to ask with the Driver etc) can the grips be made thicker? Ie: 2 wraps of tape? Quote Link to comment Share on other sites More sharing options...
DaleUK Posted December 8, 2012 Report Share Posted December 8, 2012 The '09 ONOFFs are in the lead of the 2 horse race, right? Lol you wish..;-) Quote Link to comment Share on other sites More sharing options...
gocchin Posted December 9, 2012 Author Report Share Posted December 9, 2012 T Can these be soft stepped once? Also ( and I forgot to ask with the Driver etc) can the grips be made thicker? Ie: 2 wraps of tape? Yes to both. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.