mojo2W Posted January 4, 2014 Report Share Posted January 4, 2014 (edited) I have been working on this on and off a while... a LONG while ago...years....saw Hoikaido grind on a set of Mizuno irons... I thought..how about do it on wedges... after couple of tried...playing around different angle combination and end up very low bounce...which is no so good... because I have to file a big chunk of meat off chamber to make the surface flat.... anyway, depending on the bounce that the raw edge head comes with...I finally got 8 deg bounce out off 12 deg raw bounce... the result is not bad... 2 tier bounce, the front around 24-26 deg and back tier around 6-8 deg... tried it on bunker, truf, muddy ground...the performance is quite nice...significantly promoting ball contact feedback.. the sharp front edge can really get under the ball..... the only drop back is, because the back area bounce is low...so decent control skill of wedge is needed.. the process takes time and concentration... because I can't find a way to do the angle properly on grinder... so all angles are hand filed to the rough shape then high # grind then scotch polished on the grinder.... below is photos of progression.... photos were taken from cellphone...crappy... and I am working on something else.... so I haven't have chance to finish polish and stamping stuff... will upload as soon as I get it done enjoy ... Edited January 4, 2014 by mojo2W Quote Link to comment Share on other sites More sharing options...
tokidoki1986 Posted January 9, 2014 Report Share Posted January 9, 2014 Nice work there, looking forward to see some more update pics. Quote Link to comment Share on other sites More sharing options...
mojo2W Posted January 21, 2014 Author Report Share Posted January 21, 2014 Inspired by...Kirk's guitar... 1 and half hours work...some minor errors tho... but it was 1st try and overall...looking good... Quote Link to comment Share on other sites More sharing options...
zwan Posted January 22, 2014 Report Share Posted January 22, 2014 Fantastic job, sir! Is working in this field your hobby? Once again, GREAT! Quote Link to comment Share on other sites More sharing options...
mojo2W Posted January 24, 2014 Author Report Share Posted January 24, 2014 Thanks and yes...my day job got a lot of spare time... so by doing this...showing off and somehow doing "meditation"..;-) Quote Link to comment Share on other sites More sharing options...
Spoon Posted January 24, 2014 Report Share Posted January 24, 2014 Younare very skilled. Not an easy job. Lots of potential for your hobby. Good job;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.