Jump to content

SP700 face drivers


gregoire56

Recommended Posts

looking for a list of good JDM drivers that have SP700 face material. let's see what you've got

Link to comment
Share on other sites

My favorite face material by far!! 

  1. Modart MA01D+R 
  2. Modart MA01DS
  3. Grandista RS-001  Version S
  4. Grandista RS-D  
  5. Mizuno MP Craft 2014
  6. Mizuno MP Craft H4 
  7. Mizuno MP Craft 513
  8. Mizuno GX
  9. Mizuno MP Type 1 and Type 2 
  10. Astro Tour V III
  11. TRPX D-016 

I am sure I have missed a few but this is what I have in my head as of now. 

Not JDM but Titleist C16 driver also uses SP700. 

 

 

Link to comment
Share on other sites

Came across a thread about 8 -1-1 Ti but not sure it’s face or crown. Non San, do you know whether 8 1 1 is any good? 

Link to comment
Share on other sites

8 hours ago, nobmontana said:

My favorite face material by far!! 

  1. Modart MA01D+R 
  2. Modart MA01DS
  3. Grandista RS-001  Version S
  4. Grandista RS-D  
  5. Mizuno MP Craft 2014
  6. Mizuno MP Craft H4 
  7. Mizuno MP Craft 513
  8. Mizuno GX
  9. Mizuno MP Type 1 and Type 2 
  10. Astro Tour V III
  11. TRPX D-016 

I am sure I have missed a few but this is what I have in my head as of now. 

Not JDM but Titleist C16 driver also uses SP700. 

 

 

Great list! I think at least one of the Titleist VG3 drivers has SP700 in addition to the C16

Link to comment
Share on other sites

Keep em coming! Yonex i-EZONE TX driver is another one 

Link to comment
Share on other sites

5 hours ago, Duffer19 said:

Came across a thread about 8 -1-1 Ti but not sure it’s face or crown. Non San, do you know whether 8 1 1 is any good? 

811 today is used primarily for body / crown but I have seen 8-1-1 being used on the face before. 

In fact,  I believe my trusty Ping G20 uses 8-1-1 entirely. 

G20 still does quite well compared to other Ping drivers in the last 5 years.  https://youtu.be/cOVYMHhF7So

So maybe that says something about 8-1-1 Ti. 

 

 

Link to comment
Share on other sites

37 minutes ago, gregoire56 said:

Keep em coming! Yonex i-EZONE TX driver is another one 

Yonex Tri-G are SP700 as well 

Link to comment
Share on other sites

Again not a JDM company but these guys have a driver that is entirely made of SP700 and made in Japan. 

http://www.traditionalgolf.com/driver.html

 

Link to comment
Share on other sites

19 minutes ago, nobmontana said:

Again not a JDM company but these guys have a driver that is entirely made of SP700 and made in Japan. 

http://www.traditionalgolf.com/driver.html

 

hmm isn't that interesting.. 

Zodia Z921CC is another

Link to comment
Share on other sites

The newest Romaro Type R ( previous gen used SAT2041)  

 

Link to comment
Share on other sites

5 hours ago, nobmontana said:

The newest Romaro Type R ( previous gen used SAT2041)  

 

oo really? I thought the Romaro drivers were using forged 15-3-3-3

Link to comment
Share on other sites

It's SP700 cup face,    15-3-3-3 used on the crown. 

 

https://www.tourspecgolf.com/romaro-ray-type-r-driver-2017.html 

 

 

Link to comment
Share on other sites

15 hours ago, nobmontana said:

It's SP700 cup face,    15-3-3-3 used on the crown. 

 

https://www.tourspecgolf.com/romaro-ray-type-r-driver-2017.html 

 

 

Ah I see.. the last Romario Ray V was forged 15-3-3-3 face so I guess they switched over starting with this one.. hopefully the next Ray V is SP700 too

Link to comment
Share on other sites

Real SP700 will soon be no more.  Only one company in japan makes it and they have just gone under.  There are variants used from China that are not SP700.  China does some funny shit in the golf industry.  DAT55 vs DAT55G.  they both sound familiar but the two are like different metals.  Same goes with many materials including original and japan sourced SP700 vs what other factories consider SP700.

Personally I love 8-11Ti i the body with SP700 face.   Now as far as original japan materials a new version of KS120 has been testing well and of course true DAT55G from Daido Steel.

Link to comment
Share on other sites

China makes good noodles - but when it comes to metals, they suck.

Link to comment
Share on other sites

7 hours ago, dickyfowler said:

China makes good noodles - but when it comes to metals, they suck.

I think some are good but what bugs me is they create materials and name it similar to some really good ones from Japan.  Its really shady and hurts the original metal more than anything. 

Link to comment
Share on other sites

11 hours ago, TourSpecGolfer said:

Real SP700 will soon be no more.  Only one company in japan makes it and they have just gone under.  There are variants used from China that are not SP700.  China does some funny s**t in the golf industry.  DAT55 vs DAT55G.  they both sound familiar but the two are like different metals.  Same goes with many materials including original and japan sourced SP700 vs what other factories consider SP700.

Personally I love 8-11Ti i the body with SP700 face.   Now as far as original japan materials a new version of KS120 has been testing well and of course true DAT55G from Daido Steel.

Chris - firstly, I very much appreciate you being so candid and transparent about facts like that.. 

secondly, just out of curiosity, I'm guessing then that Endo doesn't/wasn't producing its own sp700 material, or maybe they are but aren't creating the "real" version, although doubtful since they probably aren't the ones who just went under or else it'd have been big news? I ask because some of the (subjectively) best drivers/woods have had forged sp700 faces and were Endo made. I'm wondering if no such new clubs will be able to get produced anymore as a result of this manufacturer going under? 

Edited by gregoire56
Link to comment
Share on other sites

Endo was using the good Japanese suppliers for their face materials.  They never produced materials on their own.  From what I am told they do not fully produce Epon drivers on their own anymore either.  

Factories  can work on a bulk order with a material that is co-developed but that is a serious financial commitment.  Endo used KS-120 most of the time in their Epon faces.  Great material,  a little soft but what that same material supplier is working on next has me excited.  I just need our factories to pony up and drop big coin in buying it in bulk.  50/50 chance.

We need to be real though.   SP700 and DAT55G do not translate into a great performing club.  Its the culmination of every detail in its design and who its designed for that matters most.

 

Link to comment
Share on other sites

6 hours ago, supo said:

Gimme  a  super hyten  face  any day of the week .

Super Hyten is only made by Kasco.  Its a cast maraging stainless steel face of the past.   By today's standard its like a fairway woods face on a driver.   So spin is lower but its ball speeds, launch height and repulsion is lower than Titanium.

Link to comment
Share on other sites

that old 340 dna  is great and the  fd is a freaking cannon, its  a bit loud.  but good heaven is it a good feel..  the fd especially is  good.

love the stuff.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...