joey3108

It's mostly a counter balance shaft. TW mostly spec at Mid To Mid low kick and MW is a Mid To Mid Hi kick point shafts. The heavier the shaft the tighter it gets. Some of this shaft are a awsome shaft for FW. But if tipped properly and at the right style of swing, They are a great shaft for Driver too. Good Luck! Joe :cool: ps: Anyone need this shafts, I still have some in stock.

Here is one i did for Travoak2. Joe :cool:

Hard If you don't have the tools and know how exactly what you are doing. You need an adaptor, long rod, Map gas torch and shaft puller. If that has a cushin, then you need a hook to pull it out too. You have to know how long and how hot you want it to get to be able to pull it clean and save the hosel. Basically, IMO you better spend money if you want to make sure everything is intact and you better go to an experience clubmaker too. Good luck! Joe

If you had a NV85 before, you are on the right track there IMO! Try them, I don't think you'll be dissapoint. Especially on the tour 70. IMO Tight feel and the kick point is high enough . Joe :cool:

That didn't take very long for you to be convinced that you should be playing a TM 3 wood.... :whistle: what, 45 minutes of our range session? :cool: I am going to be banned by Ching from going to the range if this carries on....=) And you know whose fault it is....!! :whistle:

To bad i just sold mine, i would have sold it to you if i haven't.Joe :sad:

Still looking! Joe :cool:

I'll sell you the wrench for $25 shipped and paypaled. Joe

Joe You are full of Intel of late. If you pull some pictures out of your sleeves, this could be impressive. I will take a complete pictures as soon as he got his.He hasn't got it yet, He played w/ me and stop by today but he has his 680 in his bag. Joe :cool:

well! if that is the case you might want to look for a pull out.joe :cool:

I have a brand new in the plastic in stock Graphite design GAT LB 105 in S flex 3 - pw Taper tip.Send me email for the price if you are interested. THX! Joe [email protected]

OK now I understand where the problem is. LOL! Those number are actually the weight of the heads that i marked on every heads w/ sharpies. And on the lie you only missed the PW, It's supposed to be 63.5*. And those are Joe Kwok Standard lie. And all the .1, .9 , 1 are just my calculation when i'm working to make the swing weight calculation perfectly. Every iron are perfectly on D2 sw except the PW at D3. Tolerance will be 1/4 sw "if any". Sorry for the misunderstanding! Joe :cool:

I'll pray for the weather, so you can wack 'em. :smile1: Thanks to you who trusted me to handle your new baby. :love: BTW, Something is not right w/ that CPM numbers. They are just way off my charts. Who measured them and what kind of machine he got? YOu might want to double check that one and make sure the clamp was tighten the same tightness on every one of them. Just a head up! Joe :cool:

... I might even move back to that neighbourhood if i have to. :smile1:... Joe Kwok :cool: Sorry Joe, I just talked to my friends at the State Department and had you declared a "National Treasure". Which means: You can visit other countries, but if you try to move out of the U.S. we'll hunt you down and bring you back! ;) Now I'm working on a plan now to kidnap you from Cali and bring you to Texas! My friend the new "Mayor" of Houston says she wants to meet you: If I come over to Texas, Would she still playing w/ that bubble bath thingy. :surprize: I ain't gonna come over there for nothing, you know that! :wink: BTW, Texas HA! Hmm, Would I be able to hang out at the Cowboy's cheerleaders locker room? :laugh: :whistle: joe :cool: Cowboys? Cowboys??? Ha! We're talking Houston, baby! You've seen "Houston" above(isn't she lovely!), here's Dallas: You choose! lol Dude he is an old fart! LOL :surprize: NO more friction! :laugh:

Yes they are ! I'm the one who pulled it out.Joe :cool:

... I might even move back to that neighbourhood if i have to. :smile1:... Joe Kwok :cool: Sorry Joe, I just talked to my friends at the State Department and had you declared a "National Treasure". Which means: You can visit other countries, but if you try to move out of the U.S. we'll hunt you down and bring you back! ;) Now I'm working on a plan now to kidnap you from Cali and bring you to Texas! My friend the new "Mayor" of Houston says she wants to meet you: If I come over to Texas, Would she still playing w/ that bubble bath thingy. :surprize: I ain't gonna come over there for nothing, you know that! :wink: BTW, Texas HA! Hmm, Would I be able to hang out at the Cowboy's cheerleaders locker room? :laugh: :whistle: joe :cool:

I'm Originally from that side of neigbourhood but for the past 21 years live here in the bay area. I travel and stop by there once in a while. I would certainly drop by if i have enough customers to give enough work for me to make my trip worth while. There are quite a few Singaporean here that deal w/ me and become friends. If you guys get together and give me enough work and place to work on, i'll certainly consider coming over and meet you guys up. I might even move back to that neighbourhood if i have to. :smile1: Any body from that side want to invest on me? :money: :wink: THX! Joe Kwok :cool:

If somebody offer you for a full set and if the condition, spec and price are ideal...I will take the 7 - PW from that guy or you.Let me know if you have any luck! THX! Joe :cool:

In 9 condition or better! Any shaft is fine, I'm gonna reshaft them anyway. Send spec, pictures and price to my email address. Is there any Bridgestone rep can help me on this? THX! Joe :cool: [email protected]

Joe You are full of Intel of late. If you pull some pictures out of your sleeves, this could be impressive. Dang! Your new girlfriend is HOT! :surprize:

I forgot to add! :whistle: 660 Is a bore through head. JOe :cool:

Aluminium sleve/shim. Don't ask me why they put that thing in there. They might try to make a clubmaker harder to reshaft. IMO, An experience one should have no problem w/ it. It's just took more patient and skill to do it. joe :cool:

No ! It's definitely a lot bigger than 405cc. Maybe even around 440 - 460 on the T and around 405-415 on the S. The face on this T is about 1* close. Joe :cool:

:whistle: :wink: :yuk:

He is getting the S version also. I'll take some more picture if he drop by after Panama Open. BTW, You are very welcome boys. Joe :cool: