thehawk

any pics of the other alphabetical coded versions?

i recalled seeing some pics. any pics you guys have?

i have a set of Blade Golf woods that i would like to sell. the x400 driver has 9.5 degrees of loft and is just slightly closed. also included is the 3 and 5 woods. currently in them is standard X100s. these woods have been played a decent amount but are in not bad condition at all. if you would like we could work something out different with the shafts. pm me for info. i would like $175 for them as they are now.

i would rather sell the complete set at one time for one price. i can get almost any shaft out there and if it is a pretty standard shaft i will throw them in for no extra charge. the driver has 9.5 degrees of loft and is only closed just a little so adjusting the face to sit square while still having enough dynamic loft can be easily done. i will do the whole set for $175 (driver, 3&5woods).

i have a mint set of Blade Golf woods. this is the X400 driver, 9.5degrees of loft, and i also have the 3 and 5 woods. i will sell the set for $175. i have access to most any shaft so let me know what you would want in them. if it is a pretty standard shaft i will throw them in for free and install them for you. if it is a exotic rare shaft then we will work something out at cost. email me for details. [email protected]

i would like to add that i have access to most any shaft out there and i would be willing to install them at cost. if i already have them sitting around i would throw them in at no charge. [email protected]

will anyone take them for $575 shipped? after that i suppose i am going to just find a local buddy that will take them one round or another. for a full set of custom ground Miuras you simply cannot beat them.

i still have this set of woods that i would like to move for $175. look above for spec options.

the length are: 8.5degree driver, 44.5''; 3wd, 43''; 5wd, 42.75''. the shafts are standard X100 Dynamic Gold which have been spine aligned to the center. the swingweights are currently at a standard D3. the face angle of the driver is slightly closed. i would say that a guy who hits it straight or is more prone to fading would be fine with this face angle. the fairway woods are currently closed even a tad more than the driver. with this particular shaft, these woods hit a low tradjectory and because of this I would be willing to change the shaft to fit the buyer for a nominal extra fee. for most a lower kick shaft will be needed in these. pretty much any shaft request i can take care of. however, these woods have a hosel that can be adjusted very easily which i would be willing to do OR you could do it yourself so the face angle is just right to your specs.

i am doing a final price drop to $600 for 2-pw (wedges have already been sold). ..at top is a pic of the 7iron. next is a pic of the 3 iron. by looking at the change in lighting contrast you can see how the sole is cambered in a "hourglass" shape which gives this set outstanding versatility in all lies.

still have them. $175 for the whole set...brand new. this includes the X400 driver with 8.5 degrees of loft AND the 3&5 woods.

RussW from comcast...your reply has been sent. a few days ago my replies bounced saying your account did not exist.

why,is any of you guys in the market for a set of these?

i have dropped the price to the low limit..$700 for both irons and wedges.

i will do the whole set, both irons and wedges, for $700. this includes 2-pw and 3 wedges.

email/pms sent.

i would like to sell a tour issued set of Miura forged blades (2-pw). made from scratch with raw MB5002 heads, the set is in mint condition, 9.5/10 as you can see in the pics. i also have a set of wedges that would compliment the set nicely (gw,sw,lw). these have S400 spine aligned shafts in them (a nice story behind where these shafts came from). i would like to get $700 for the whole set. email me ([email protected]) for details. below are some pics to give you a good idea of the set. if you study very closely and notice the contrast in light differences, you can make out the custom grind that was put on these forgings for absolute versatility in all lies. pictured from top to bottom: 7iron address, 3iron address, the leading edge grind on the 3 iron, the sole and back view of the wedges, and the address view of the wedges

pm sent.

..there is but no one is creative enough to figure it out yet.

chris, that sounds good, i will await the new fancy Ebay system. also, let me know on your opinion when it comes to shipping so i can get your clubs out. thanks. i pmed you.

when you complete a positive transaction with another member, how do you leave a trading point for them? how does a buyer leave one for you? please fill me in on this process.

tsgolfer, pm sent in reply.

dropped to $175 for the set.

none of you guys know the prices these Rac 304 stainless steel wedges go for?

what is the average prices for the tour issued Taylor Made 304 stainless RAC wedges? specifically, a lob wedge of 58 or 60 degrees with very little bounce (6 degrees or less), some relief ground off the heel, and the leading edge rounded/blunted to prevent digging? thanks for the knowledge.