Cerveyack Posted October 18, 2004 Report Share Posted October 18, 2004 I am looking to refinish either a 200 tour or a Vsteel, where should I send it, and how much should I be planning to spend, is there any other customizations that can be made other than the color of the paint used? Also I am getting my ping wedges refinished, and have removed the weight ports, Is it possible for the place, probably the iron factory to weld over the hole that the ports were in, so it would be flat? I know this would alter the weight, but then couldn't I just drill the right size holes in order for the weight to be back to normal? Thanks Quote Link to comment Share on other sites More sharing options...
joey3108 Posted October 19, 2004 Report Share Posted October 19, 2004 I am looking to refinish either a 200 tour or a Vsteel, where should I send it, and how much should I be planning to spend, is there any other customizations that can be made other than the color of the paint used? Also I am getting my ping wedges refinished, and have removed the weight ports, Is it possible for the place, probably the iron factory to weld over the hole that the ports were in, so it would be flat? I know this would alter the weight, but then couldn't I just drill the right size holes in order for the weight to be back to normal? Thanks http://www.customclubcoatings.com/Tell Jim that i send you! Good luck! Joe Quote Link to comment Share on other sites More sharing options...
AKFLY Posted October 20, 2004 Report Share Posted October 20, 2004 I am looking to refinish either a 200 tour or a Vsteel, where should I send it, and how much should I be planning to spend, is there any other customizations that can be made other than the color of the paint used? Also I am getting my ping wedges refinished, and have removed the weight ports, Is it possible for the place, probably the iron factory to weld over the hole that the ports were in, so it would be flat? I know this would alter the weight, but then couldn't I just drill the right size holes in order for the weight to be back to normal? Thanks http://www.customclubcoatings.com/Tell Jim that i send you! Good luck! Joe Joe, Can you gives us a mini review on these guys - other than do not send them a foamed head - and also any pics would be awesome. Winter in the Midwest is coming and I plan on getting a jump on having some clubs refinished. Thanks, Andy Quote Link to comment Share on other sites More sharing options...
toshman Posted October 21, 2004 Report Share Posted October 21, 2004 this is totally different for the wood finishing, might even be stupid, but is there anyway that you can refinish an iron in a different finish than it originally came in, like mizuno mirror chrome to satin or somekind of black, and how much am i looking at and turn around if there was any help or direction would be much appreciated and you guys are kick ass on this sight Quote Link to comment Share on other sites More sharing options...
Alcap26 Posted October 21, 2004 Report Share Posted October 21, 2004 Custom Club Coatings does have some pics on their website. Yes you can refinish a wood in any color. Just do a google on custom club coatings and you can look at some of the refinishes they have on there. Quote Link to comment Share on other sites More sharing options...
indacup Posted October 21, 2004 Report Share Posted October 21, 2004 Oddly enough, I sent a head to Jim at CCC this morning...I've sent him about a dozen so far...each one a different color. Matter of fact, go to his site and you'll see my Green Nemesis he made for me. Also, if you go to FGI, I started a thread there yesterday asking oters who've had heads done by Jim to post pictures of them...you'll see some quality work. As far as Irons.... the Iron Factory does all my irons exclusively... I had an idiot who drilled holes in his DLIII Vokey wedges to lighten them.. After he sobered up, he brought them to me for repair...I sent them to TIF and they filled them and not only couldn't you tell there were holes there before...but they returned the weight to the original spec! Quote Link to comment Share on other sites More sharing options...
joey3108 Posted October 21, 2004 Report Share Posted October 21, 2004 I am looking to refinish either a 200 tour or a Vsteel, where should I send it, and how much should I be planning to spend, is there any other customizations that can be made other than the color of the paint used? Also I am getting my ping wedges refinished, and have removed the weight ports, Is it possible for the place, probably the iron factory to weld over the hole that the ports were in, so it would be flat? I know this would alter the weight, but then couldn't I just drill the right size holes in order for the weight to be back to normal? Thanks http://www.customclubcoatings.com/Tell Jim that i send you! Good luck! Joe Joe, Can you gives us a mini review on these guys - other than do not send them a foamed head - and also any pics would be awesome. Winter in the Midwest is coming and I plan on getting a jump on having some clubs refinished. Thanks, Andy It looks like i don't have to do that anymore. LOL!I have one i asked Jim to redo on my rescue. I will get it back soon. I can post picture if anyone wish to see. I think he said he would do what he call black pearl. Jim is a great guy. Joe Quote Link to comment Share on other sites More sharing options...
jboy Posted October 26, 2004 Report Share Posted October 26, 2004 I emailed the iron factory about regrooving and refinishing cobalt heads and got no reply. :sad: Quote Link to comment Share on other sites More sharing options...
indacup Posted October 26, 2004 Report Share Posted October 26, 2004 I emailed the iron factory about regrooving and refinishing cobalt heads and got no reply. :sad: They're from the "Old School"...you need to call them...their number is on their website. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.