Jump to content

Anserfreak's "rubberized" r7 weights


Precision

Recommended Posts

BabelFish Translation... :-D

*TaylorMade r7 quad TP プチチ…ーン

According to notice it tried doing.

Those where this time it tries doing, the weight which is installed in the TaylorMade r7 series, are screw system, if the TV CM sort of usually that r7 sound doing "click" it turns to the point of, it is locked securely. R7 TP Koudaka it is excessively and sound says does not do with, to hit, depending upon the place there are times when extreme metal sound does.

It was then whether thinking, somehow cannot put out the same effect as the rubber material for the vibration absorption which is installed in the TourStage New X-DRIVE series of BS with r7. The occasion where you screw in, it meaning that the weight has covered around the screw, it does, but as for that weight there are no times when it comes off. But if you do not hold down, we are not fixed, move. When you insert those like the rubber, you thought that perhaps, with with the notion that where you say, in this weight and the part where the driver head touches directly what what the effect is produced. However when excessively thick ones are inserted, the effect of vibration absorption it becomes high, but because the danger of coming off it is, the extent which it becomes deformed to the utmost thin those of the eye, or when installing by tightening, we had decided to search the high soft rubber.

Then the fact that it is found is something under, (it supplied at all foam/home centers).

parts1.jpgparts2.jpgparts3.jpg

The left does not touch with those which the nail and the screw etc. lock directly, with those in order the sea urchin to do, processing easily to do so was the thing relatively, (1 3 Yen). Middle ones were in the counter around the water, it is the gasket, (about certain 100 Yen). It is extreme right was in the counter which sells the rubber board and the like, the bush rubber (with 10 about 250 Yen).

Weight of weight of 10g neighborhood because the opening is not left over in the weight part and the installing part of the head, had decided to insert the extremely small rubber tube, (middle ones of the photograph above). In addition 2g - Because the weight of 4g considerably is a space in the center section of weight, we had decided to attach the bush rubber of the kind of size which it sticks to the space which inserts weight if possible (those on the right of the photograph above).

after1.jpgafter2.jpg

It is in a state where the respective rubber is attached. The left is the place where the bush rubber is attached 2, but it is too large just a little. The right has placed the rubber in the weight of 10g on extreme left, but it is exactly good size. Because as for the one which is not TP there is only the weight of 10g and 2g, when this rubber is installed, a little it becomes heavy. As for 10g particularly as for big change it was not.

wt1.jpg->wt2.jpg

wt3.jpg->wt4.jpg

The top is original weight and weight after the installing. The weight of 2g 2 attaching the rubber, 3.2g. The weight of 10g putting the gasket, it was 10.1g. If point to the change of excessive weight you do not want, if of a little size searches the gasket small awakening, you think that the installing method also those of 2g being similar to those of 10g is possible.

Well, being to try installing promptly, it does, when, but first almost being to keep entering, it does the screw to the same position without problem, but 2g because the bush rubber was inserted 2, became rather narrow state, resigned and closed the excessive rubber tore. As for this while shaving the part to which one time removing and the rubber are too large with the nipper you arranged size. And when it tries installing, the original it was possible to the same position without problem to tighten. Because weight of heavier one extremely just inserted the thin rubber in the part where it touches, it could install normal state and what not to change.

And it tried comparing the feel before the installing and the feel after the installing, but the practice companion, by your are around sound bodily sensation could change of course. In addition but, perhaps, spirit of the ball the favor eye, the kind of air which extends did. Actually if in this state, you try with usual course, you think that the result is produced clearly. In addition, also the feel which is transmitted to the hand became feeling good ones. Simply, because the sphere whose drop which usually does not come out feeling is a little high appearing shot was several, it is necessary to verify whether or that day which are something due to the fact that that changes really rpm of the ball accidentally is.

It tried doing after a long time with the just a little idea, perhaps, but it is unexpected and the effect. As for the method which has r7 being to be チ…ーン which it is possible for several hundred Yen as for the value which it tries trying you think that it is. In order not to insert those where the giving ぐ れ, tightening the screw is left over and going accurately, is too large, please pay attention.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...