I have a 10* G2 and am installing a ZCOM TW64 (s) at 45".

I am told the G2 head is very light.

What's the best method (other than lead tape) to add weight to the head?

Would like SW to be D3 - D4.

Thanks.

I have a 10* G2 and am installing a ZCOM TW64 (s) at 45".

I am told the G2 head is very light.

What's the best method (other than lead tape) to add weight to the head?

Would like SW to be D3 - D4.

Thanks.

I'm sure there are many ways but I always go by lead tape, I have some on my shaft to make it feel more like my old 510 tp like retief. Tyr adding lead tape to the shaft if you don't want to add it to a good new head. Sorry I can't help you more.

I have a 10* G2 and am installing a ZCOM TW64 (s) at 45".

I am told the G2 head is very light.

What's the best method (other than lead tape) to add weight to the head?

Would like SW to be D3 - D4.

Thanks.

You need to open the hosel plug and inject a 24 hrs epoxy and tungsten mixture and let it sit to a spot you'ld like the bias to be.

Proceed w/ reshafting the head after the glue completely dry.

Good luck!

Joe :cool: