Accra Iron Shafts

[HoMStYLz]

anyone have any info on the Accra steel shafts, trajectory, stiffness, feel? ive been thinking about going to them but dont know much about them.

[deman]

I had a clubmaker recommend these for my Z101s when I was not happy with the S300 in them. Ever since I have been searching for specs so that I could consider them. Can't find anything on them so if someone has info or feedback I would love to see it.

[ChiliDip]

I've been playing with these shaft since the start of the year and really like them. Althoug I'm no expert I'll try my best at describing these shafts. The best thing about these shafts is how totally customizable they are so you should know what you want. The come in raw flexes of 4.5, 5.5, 6.5 and can be tweaked to match your specs. The cool part is that you can customize your flex pattern to dictate trajectory, if you wanted you could have a varying flex pattern like a Rife Flighted or a consistent flight like a Rifle.

Since the person who created these shafts is also the same person who created Project X. I'll try to compare the two as best as I can, I feel that the Project X is a lower spinning shaft, for me accras perform better in wedges both have great feel I think that the Accras are smoother but not much.

[offtheback]

I have been playing these for the last 2 months and can't say enough about the performance.. I am a shaft ho and I have tried everything- to me these have the best of all worlds, and most importantly completely customized. here is an example of what you can do: This following info is from Jerry @ backnwack on my irons sets he did for me(he has some of the The best customer service I have ever found- awesome to work with!:

The sets are labeled 'A' and 'B' followed by the iron they are for i.e. the

B-6 shaft would be set B and for the 6 iron.

Here's what they are ( and these sets are really cool I might add!)

Set A: (note: set A was built using all 5.5 blanks. all built for high kick/low launch-trimming specs generated by the Accra comp. program)

A3---rifle 5.5 (shaft was trimmed 3 11/16")

A4---rifle 5.6 (shaft was trimmed 4 7/16")

A5---rifle 5.8 (shaft was trimmed 5 5/16")

A6---rifle 5.8 (shaft was trimmed 5 14/16")

A7---rifle 5.8 (shaft was trimmed 6 7/16")

A8---rifle 5.8 (shaft was trimmed 7 0/16")

A9---rifle 5.8 (shaft was trimmed 7 9/16")

APW-rifle 5.8 (shaft was trimmed 8 2/16")

AW--rifle 6.2 (shaft was trimmed 8 4/16")

AW--rifle 6.2 (shaft was trimmed 8 4/16")

Set B:(note: the 3&4 iron of set B called for using a 6.5 blank, all the rest called for 5.5 blanks. 3&4 iron are high-mid traj, 5-7iron are mid-traj., 8-PW are low-mid traj.)

B3---rifle 5.8 (shaft was trimmed 2 3/16")

B4---rifle 5.8 (shaft was trimmed 3 3/16")

B5---rifle 5.8 (shaft was trimmed 5 5/16")

B6---rifle 5.8 (shaft was trimmed 5 14/16")

B7---rifle 5.8 (shaft was trimmed 6 7/16")

B8---rifle 5.8 (shaft was trimmed 7 0/16")

B9---rifle 5.8 (shaft was trimmed 7 9/16")

BPW-rifle 5.8 (shaft was trimmed 8 2/16")

[HoMStYLz]

Offtheback, thanks for the info. how do they compare to the Tour Concepts, as a player with a high swing speed (driver 120+) would you recommend these shafts over the TC's?