msupl Posted December 16, 2005 Report Share Posted December 16, 2005 I have a Nike SQ Tour driver with a stiff Mitsubishi Rayon Diamana 83 shaft. I was looking on their website and it said for stiffer performance for driver: Blind Bore: 1/2" Tip Bore through: No-tip- insert shaft to 2" depth Which one should I do? I'm a newbie at this if you can't tell. Quote Link to comment Share on other sites More sharing options...
03trdblack Posted December 16, 2005 Report Share Posted December 16, 2005 I have a Nike SQ Tour driver with a stiff Mitsubishi Rayon Diamana 83 shaft. I was looking on their website and it said for stiffer performance for driver:Blind Bore: 1/2" Tip Bore through: No-tip- insert shaft to 2" depth Which one should I do? I'm a newbie at this if you can't tell. The Nike SQ is not a bore through clubhead. Those are clubs like Callaway's that have the shaft coming all the way through the head. I don't know if the SQ is a standard blind bore head or not. You would have to measure how much the shaft goes into it to determine that. My guess is that it won't go in much more than 1.25" to 1.5" which would lend itself to being tipped about 1/2". Hope that helps some. Quote Link to comment Share on other sites More sharing options...
S2000golfer Posted December 21, 2005 Report Share Posted December 21, 2005 The SQ is a standard bore head, NOT blind bore, and NOT through bore. Tipping the Diamana into this head will NOT be needed, unless you are trying to tighten the shaft up a little, or lower the trajectory a bit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.