Posted August 15, 201113 yr Per a previous thread, I picked up some pre-loved Miura forged RAW wedges about 2-3 weeks back with "genuine" etched on the hosels of both and with "Tour Issue Miura Wedges" on stickers on the DG shafts. I doubt they are real tour issue and that was perhaps a ploy by the golf shop. That however is not the point of this thread. I have put the Miura 60* wedge in play which comes with a DGSL300 shaft. Just 2 days ago, I reshafted the Miura 52* which is a very light head to the exact same setup as my Epon TEchnity Copper 52% ie, same shaft, same flex, same length, same grip, same loft, same lie and very similar swing weight (maybe less than 1/2 SW point difference with the Miura being the lighter of the 2). This is possibly the best comparison for a head to head as that is the only difference. I hit both at the range yesterday and I can safely conclude the following: 1. The miura setup seems to fly slightly lower. 2. Miura setup drops and stops a lot better than the Epon. The Epon can hold greens well enough but the Miura seems more adapted for dead pin attacks. 3. Despite it being a short club and a 52, somehow the Miura seems more accurate. Again, Same lie, length et al. 4. Miura setup seems softer and more solid on pure hits than the Epon. While I am still gaming the Epon Pro-Is for my irons, I've moved to the Miuras for the 52 and 60. Epons are still great but FOR ME, the 2 used Miura's I picked up are just that tad better. Wish I could post pics but I'm just having trouble posting pics here and my photobucket account seems crazy. Edited August 15, 201113 yr by wmclarenf1
August 15, 201113 yr Author been looking for those technicity copper wedges, i have the 60 and love it If ever you wanna let go of your Epon 60 copper head, do let me know. Or I have 2 Epon Techinty 60 Black heads if you are interested.
August 15, 201113 yr If ever you wanna let go of your Epon 60 copper head, do let me know. Or I have 2 Epon Techinty 60 Black heads if you are interested. sure will do. looking for a 50 and 56 to match my copper 302s
August 15, 201113 yr Author sure will do. looking for a 50 and 56 to match my copper 302s Your 60 is the older Technity copper and not the newer KGX copper range I presume. The older range is lower bounce which I tend to prefer.
August 15, 201113 yr I had the chrome technity epon a while back. It was so shiny it could blind the players on another hole. They also were not as soft as the miura.
August 15, 201113 yr Author OK. My Miura wedges are like the ones in ebay listing. Its stated as tour issue as well. Bogus or really tour issue? http://cgi.ebay.com/Miura-Genuine-Forged-54-degree-Tour-Wedge-Stiff-MRH-/200641055795?pt=Golf_Clubs&hash=item2eb7238c33 Apologies for the link but I really can;t post pics here.
August 15, 201113 yr OK. My Miura wedges are like the ones in ebay listing. Its stated as tour issue as well. Bogus or really tour issue? http://cgi.ebay.com/Miura-Genuine-Forged-54-degree-Tour-Wedge-Stiff-MRH-/200641055795?pt=Golf_Clubs&hash=item2eb7238c33 Apologies for the link but I really can;t post pics here. That looks real. It's the older Miura wedges marketed outside of Japan. Can't really say it's tour issue, but I've seen lots of these in non-tour players hands. I don't believe it came in a raw version, but it becomes raw with extended use.
August 16, 201113 yr Author That looks real. It's the older Miura wedges marketed outside of Japan. Can't really say it's tour issue, but I've seen lots of these in non-tour players hands. I don't believe it came in a raw version, but it becomes raw with extended use. Mine are definitely RAW. Are they conforming Edited August 16, 201113 yr by wmclarenf1
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.