Posted February 7, 201312 yr ok guys normally i would not ask this question as i would just bend em 1* upright and re test with tape and get it done til lie angles are perfect but i am leaving for out of town tomorrow. my trusted builder and fitter is on vacation and will send this to another guy. based on my hits, i know for a fact is the clubs play a little flat. so based on pics to i have them bent 1* or 1.5*? i can sort them out when i get back but just wanted my OC mind to be at peace. i used to be flat but i have changed my swing plane and made it more compact and rotary, coming from the inside more. thanks in advance 6 iron pw at top, 4 i lowes
February 7, 201312 yr Every 1/4" off centre is a degree. Not sure measurement of lines. Bend & retape the scoring clubs & re-hit where it matters most.
February 7, 201312 yr Author Every 1/4" off centre is a degree. Not sure measurement of lines. Bend & retape the scoring clubs & re-hit where it matters most. i will bend the 6 and the 8. i have had 2 range sessions with the new clubs and honestly i hit them fine as is. but know i know they are flat it changes everything
February 7, 201312 yr they are the personalized personals V21_SPOON_spec3 :tsg_smiley_king:/> (drools). Nice Bro! More pics :)
February 7, 201312 yr Author ok so i checked lie angles and they were apparently 1* flat from stock. so i am actually .5* upright. will be testing these in a bit.
February 7, 201312 yr Author And…. Pw was ok. 9 has to be bent an additional .5 8 and 7 and additional 1* Had 3-6 bent 2* up.. The lies were all wrong some as much as 1-1.5 flatter than spec.. Testing them now before i leave
February 7, 201312 yr Pw was ok. 9 has to be bent an additional .5 8 and 7 and additional 1* Had 3-6 bent 2* up.. The lies were all wrong some as much as 1-1.5 flatter than spec.. Testing them now before i leave What kind of shoddy craftsmanship is that?
February 8, 201312 yr Author What kind of shoddy craftsmanship is that? happens from the factory. heres the latest from this morning. i may still have time to tweak them before i leave this afternoon. so 4-8 1* and everything else 1.5?
February 8, 201312 yr Put a tape on the face n draw a line using a marker n see where the line impact is....
February 8, 201312 yr Author Put a tape on the face n draw a line using a marker n see where the line impact is.... Say what ed?
February 8, 201312 yr Do a dynamic lie angel test. Lie boards don't tell the whole story especially on shorter irons. Yes draw line on ball n line up that ball and then strike each club n see where the mark is left off the face of the iron,,,,
February 8, 201312 yr Another way to check lie angle Spoonie. Need to get the lie on the ball perfectly horizontal though. Sent from my Nexus 4 using Tapatalk 2
February 8, 201312 yr C, nothing wrong with the lie angles, it's your swing. But, in all seriousness what ed said is true. I found my shorter clubs need bent more then the longer ones. Edited February 8, 201312 yr by idrive
February 8, 201312 yr Author C, nothing wrong with the lie angles, it's your swing. :tsg_smiley_cyclops:/> But, in all seriousness what ed said is true. I found my shorter clubs need bent more then the longer ones. Yeah the shorter irons were ben upright 3 deg and the longer ones less. Yeah J i knowits my swing but i just wan o give myself the best chance lie Angle wise
February 8, 201312 yr Author Pretty consistent swing from those marks along all the irons. Yup bent em . To stock spec and a further 1.5-2.5 up Updates soon. Will go thru the same fitting with my 551s
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.