AKFLY Posted March 10, 2004 Report Share Posted March 10, 2004 1- How to build a graphite shaft extractor for like $20.00 2-Using wooden dowels in your steel shaft for dampening. 3-How to install tight ferrules - soak in hot water than use eposy as a lube. Not that all the advise is great but these are my top three. Thank You ! Quote Link to comment Share on other sites More sharing options...
Alcap26 Posted March 10, 2004 Report Share Posted March 10, 2004 huh huh huh (trying my best Butthead impersination)...he said lube. :D On a serious note I would say these: 1) Benefits of checking lofts/lie angles regularly and tipping shafts to different lengths for different results. 2) Shortening my irons a half of inch and the benefits. 3) What to look for if I send some irons in for rechroming (weight of head after and the copper nickel layer) Quote Link to comment Share on other sites More sharing options...
AKFLY Posted March 10, 2004 Author Report Share Posted March 10, 2004 huh huh huh (trying my best Butthead impersination)...he said lube. :DOn a serious note I would say these: 1) Reading Mike talking about swinging flat made me think to get my hands high....my new swing thought. 2) Shortening my irons a half of inch 3) This may not be a tip but it sure helped my game...my first tour driver purchase was due to this site and it has helped my driving by leaps and bounds. Those are good - but I was focusing on the club builders forum. He also said shaft-yeah shaft- nice shaft. Quote Link to comment Share on other sites More sharing options...
Alcap26 Posted March 10, 2004 Report Share Posted March 10, 2004 Sorry about that AK...I guess I should look at the forum a post is in more often. My first post has been edited. Quote Link to comment Share on other sites More sharing options...
AKFLY Posted March 10, 2004 Author Report Share Posted March 10, 2004 Sorry about that AK...I guess I should look at the forum a post is in more often. I will edit my post if you want me to. Hey - no problem AL. I would just like to hear what evreyone has learned. I am a student of club building and this site has been very helpful - and most evreyone will go out of their way to respond to your questions - no matter how trivial they may be. Quote Link to comment Share on other sites More sharing options...
Mike Posted March 10, 2004 Report Share Posted March 10, 2004 Question for you then AK . How do you think a NV tipped the same as yours work in my 510Mid ?? Quote Link to comment Share on other sites More sharing options...
AKFLY Posted March 10, 2004 Author Report Share Posted March 10, 2004 Question for you then AK . How do you think a NV tipped the same as yours work in my 510Mid ?? Mike, The mid has a 2 inch insertion vs. 1 1/4 inch on my TP, so I would not tip it. My theory was that according to Aldila, for the NV to play to flex in needs to be inserted 1.75". I tipped mine 3/4 of an inch to play a tad stiffer. Quote Link to comment Share on other sites More sharing options...
Mike Posted March 10, 2004 Report Share Posted March 10, 2004 Okay then no tipped would be required . As we have the same swing characteristic's :lol: Too big a word for this early in the morning :) PM sent AK . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.