000AA

Thanks again. I finally hit the special tuning, quite amazing!

Thank you Mark, Do you know if the thinner face of the special tuning is the only difference compare to the other heads?

Many thanks Mark. Seems to me that the special tuning have the stock shaft of the Premia. Any info concerning the head?

I am trying to find the original specifications of the Ryoma driver D1, special tuning with graphite design stock shaft. I did search the forum and the Ryoma website, but can't find them. Many thanks in advance for your help.

Thank you Gocchin.

Do you know when it will released, and if they will present also a Hi-Cor model?

Superman HiCor! Whaaaaaaaaaaaaaahhhhhhh. If you don't it this one at least 300 yards, you will look like an idiot on the course.... LOL I would be close to be ashamed, and believe me I am not shy, to use a club like that and not going farther than my 200/220 yards.

Thank you for your feedback. I did try briefly the Ryoma with a stock shaft in a store in HK and I was not very impressed, but it was hard to judge. The store had just a net, no trackman or flightscope to check distance or speed.... I would like to try the RomaRo. Any other ideas?

Dear All, I am looking for a Hi-Cor, non-conforming driver head. To be shafted with an ARMRQ6 , Regular Flex. The shaft is coming from an Honma Amazing spec driver “Zirconium” model. About 50gr. And 46.5 long, but I might shorten it a bit. The target is distance and forgiveness, my swing speed is between 87 and 94 MPH, not very fast I know. Any suggestions? Thanks in advance for your feedback.

Hi Mark, I see that you are a 28HDC, no disrespect here, but IMHO I would get the GW from XXIO7 and keep the SW with a steel shaft. I would use the SW only in the sand. That's what I did for quite awhile. I am a HDC 19, and It's only lately that I started to use a GW with a steel shaft. It's much more easy to control your GW with a graphite shaft from 70 yards, and less to the hole, than your 56° steel shaft.

Thanks for your feedback. Checking all the specs, i have found that the QUADRA 4AX SOF 652I AND FUJIKURA MOTORE 60I could be a good choice. Any though on these?

Hello, you could get the GW and SW of your XXIO7 serie. If memory serve me well, the GW is 50° and the SW 56°. Personally, I would get the GW and get a "real" SW with a steel shaft. The head of the SW of the the serie is quite big.

Dear All, My first post here, although it’s been awhile since I am checking this great forum frequently. I want to get a set of Miura PP9003 4 to GW, but unfortunately where I live (in Europe) I don’t have the possibility to try the heads with different shafts. One dealer offers them with the Fujikura graphite Reg. Max fit-on 65gr. and that’s the only option in graphite, unfortunately. Although I was quite impressed with this shaft, I am pretty sure I could find something better. Few infos about me: I am 52, started to play 4 years ago, my handicap is 19 and going down. Swing speed is +/- 73 mph with a 7 iron, distance 145 Yards. I have a set of 2011 XXIO forged and a set of Honma S-02. So I am used to hit very light shaft, can’t it a steel, it’s definitely not for me. So I would like to find a shaft with the same (or better) properties/feeling than the XXIO and Armrq6. Any infos, suggestions or tips are welcome. Thanks for reading.