7fa

Bump- Still available

Deal fell through. Back up for sale. Will consider all interesting offers...

New lower price just $295 shipped!!! Bring me some interesting offers. I'm looking for a set of Gauge Design irons...

Looking to sell a Gauge Design Japan Eldik Sp Limited Edition (1 of 100). Putter is 34" with NS Pro shaft and heavier 360gr head. Four Tungsten Ingots and very cool black teflon finish that put a great roll on the ball. Putter is in 9.9 condition. I took it out of the plastic and rolled a few balls on the carpet before putting it away last year. Specs can be found at updated link. Just add http in front of ://translate.google.com/translate?hl=en&sl=ja&u=http://www.gaugedesign.co.jp/Products/ELDIK-SP.htm&prev=/search%3Fq%3Deldik%2BSP%26hl%3Den%26lr%3D Looking for $325 shipped or interesting trades. Now $295 shipped!!! NOW $265 SHIPPED!!!!

Bump for the weekend crowd.

Price lowered tp $350 shipped!!!!!!!

Selling a GD Japan Eldik SP putter. 1 of 100 made. 34" Black Teflon finish, 4 tungsten ingots, 360gr head. Bought new from Chris last year. I took off the plastic and rolled a few balls on the carpet before putting it up in the closet (where it has been since.) Brand new condition. Trying to thin the herd some to fund new toys... Asking $375 shipped to US. Will consider shipping overseas. No Trades please. NOW $350 SHIPPED Can also see details at http://translate.google.com/translate?hl=e...hl%3Den%26lr%3D

I just picked up a 52* Zodia wedge from my local shop out of the "$10 Wedge Bag". I've heard of the Zodia name, but am not familiar with their wedges. This one is marked "KM Tour Wedge ZS852" . S200 shaft. It has a very rough grainy looking gunmetal/raw type of finsh and a cambered sole. Stamped "Made in Japan" on the Hosel Can anyone tell me some details about this wedge??

I'm not sure how to post pics in a thread, but I posted pics of the 4 iron and 9 iron at address. http://photobucket.com/albums/y8/7fa/

Hi Johann, I have played both and currently have the 202s in the bag. Here's my opinion. Looks- TS-202 hands down. Beautiful design. Much nicer lines and styling. Size- Very similar in the long irons, but the MX-23 short irons are bigger and chunkier looking then the 202s. I also think the 23s have more offset throughout the set. Feel- I thought the 202s felt a little better, but both have nice forged feel Forgiveness- Both are very forgiving. Not Ping G2 forgiving, but as good as it gets for a forged iron. At a 16 you can handle 202s with ease. Get the 202s if you have the chance......

Sold...

Still available- Price reduced to $185 shipped!!!!

Have an new uncut Fuji 761TB for sale. S-flex Tour Spec graphics. I bought this for a project driver after hitting my buddies Launcher w/ a 761TB, but have been hitting my current driver well and dont want to experiment... Specs are 78g 3.1 torque. In my opinion 761 is smoother and easier to load than 757, but has better "feel" Looking for $200 shipped

53* wedge is no longer available. Thanks again for all the interest!!

OK guys, The 3-PW and 59* are sold, but I still have the 53* wedge for sale as Todd decided to pass. Will take $85 shipped for the head alone, or $100 for the complete club with the spinner shaft. Thanks!!

Deal pending on the set. Thanks to all for the interest.

I have an R-flex 661 Speeder in my Tsunami 400 driver and really like it. Little smoother feel to me than my previous 757 speeder. Easy to load and no harshness. My SS is in the 103mph range but the shaft holds up fine. I think you'd be OK with your SS as long as there's no tipping. The 661 has been discontinued I believe and replaced with the 652. My understanding is that the specs are very similar, but the 661 was a more expensive shaft to make because of the materials. Good luck

Guys, lots of PM and emails but the set is still available. I spoke with Ari to get a few more details and here's what I learned. 8-9 iron are the "Classic" style blade Wedges have the specs below. Ari mentioned they have some heel and toe relief to allow opening up the face. I'll be glad to take close up pics of the soles if anyone needs them 47*- Fairway wedge grind with 4* bounce 53* - 8* bounce 59*- Thought to be 6*bouce , but not 100% sure. Irons were built to play around D-4 SW at the .25" overlength. Please keep the questions and offers coming!!!

Alright guys... Lot's of emails and PMs on these, but they are still available. To answer some frequent questions.. The 5 iron length is 38.25" (.25" over std) and the set goes up and down in .5" increments down to the 9 iron. The 3 wedges are all 35.5" No shaft bands on any of the shafts. Lofts are... wedges 47*/53*/59* , 43*9, 39*8, 35*7, 31*6, 27*5, 23*4 and 20*3. I don't have a way to measure the lie, but I was told they were standard and they look to be that way. These irons are made of super soft 1018 steel and can be easily adjusted for lie and loft. Keep the emails and offers coming. I will also consider partial trades.

Would do $550 shipped for the heads only. Thanks!

Selling a set of Scratch Custom irons. Set consists of 3-7 Cavity Back, 8-9 muscleback, 47* Wedge, 53* Wedge, 59* Wedge (10 irons total). 3X Black Oxide finish with yellow paint fill. TX Tour S-flex in 3-PW and Rifle Spinner shafts in 53/59 wedges. Like new GP Decade cord grips. Irons are in 9+ condition and some have never been hit. There is some sole and finish wear on the 8 iron and 53* as I used these several times at the range, but overall the set is in excellent condition. Please see pictures located at http://photobucket.com/albums/y8/7fa/ I bought this set from Icemakr here on B/S/T a few months ago but have decided to stick with my current setup. Looking for $600 shipped for the set. Will also consider selling heads only if someone is interested... Please email or PM with questions or if you want more pictures.

Bert- PM Sent...

I just reshafted a set I picked up and they were definitely taper tips. These were the original NB-32 set released a few years back and not the "limited edition" set released last year. Every set of Tourstage irons I've owned have been tapers. I guess there's a chance a used set has been bored to accept .370 tips, but you can always use shims if needed. Good luck!