Rodfern

anyone got one?

PM Sent

Zodia KM Tour US Spec 59* (can be bent to 58*). GREAT wedge for tight lies! The grind on this wedge is one of the most versitile you can find. Got mine from Paul at Shreveport Golf and absolutely love it.

PMs replied to....

Well, I used the tool to pick my AXIV and as promised reporting back. I was led to a 6568M and when this shaft was recieved and installed it performed very well for me. Tightens of dispersion and AXIV "kick" was there! However, I had replaced a UST V2 75 shaft and found myself missing that extra weight. Consequently the 6568M has been replaced with a 7568M and I could not be happier! Great shafts these AXIVs! I just posted the 6568M for resale is anyone is interested. Regards, Rodfern

I have four shafts I am looking to sell. All shafts are clean (no grips, no tape); some epoxy still needs to be scraped off. All prices as shipped CONUS. PM or send email to [email protected] - ebay id is Rodfern Graphite Design Tour AD I-65, Stiff Flex, Untipped. 42 15/16 inches - $185.00 TaylorMade Tour Shaqx, Untipped (measures 25 10/16 from tip to "N" in Rayon) - 43 10/16 inches - SOLD! Tourstage TDX-70 by Diamana (this is a Stinger shaft), Stiff Flex, Tipped 1/2 inch, 42 9/16 inches - SOLD! AXIV 6568M, Orange, Untipped, 43 6/16 inches - SOLD! Tour AD Tour AD Tip

I have seen a lot of threads about selecting the right Axiv shaft. Stumbled on a link at http://www.axiv.jp where they recommend a matrix for selecting the right shaft. It is based on swing speed, tempo, desired ball flight and weight. The site is tough if you can't reach japanese, but the link off the home page clearly says MATRIX. Oncle clicked, there is a "start" button which leads to the actual selection matric. These steps are challenging because of lanuage but it is somewhat intuitive. The speed is easy; it is in m/sec but with the help of an online coverstion tool, (Convert M/sec to Mph: http://www.onlineconversion.com/speed_common.htm ) no prob to find MPH. For tempo, I guessed that the top is slow, middle is avg, bottom is quick. For trajectory, top is low, middle is mid, bottom is high. Weight is easy as it is in grams. Anyone out there who can read japanese, pls comment on what each tempo/traj selection box says. If you are thinking about Axiv. this may be the way to go to pick the right shaft for you. Will try it myself and re-post results. Regards, Rodfern

PM Sent.....I have a set of NS Pro 1050 stiff, 2 - PW pulled from a set of Miura CB-201s if you are still interested.

All remaining stuff going to eBay. Please close thread.

Both Scratch Wedges SOLD! Thanks acrazygolfer. All stuff going to eBay.....please close thread.

REDUCED 20% off listed prices 'til tomorrow, then off to ebay - 9/6/05

REDUCED 20% off listed price 'til tomorrow, then off to eBay - 9/6/05

Rossa Daytona ASGI is SOLD!

C-Groove Olivia is SOLD

pics added: Cleveland CG10s Scratch zodia grind (head only) Scratch 60 RAC 60 RAC 50 MacGregor Forged & Custom finish

PICs added: C-groove Hiro Rossa Ping WRX Ti2 Ping Pal 2F Breeds Limited 123/250

Labor Day Wedge Sale - All prices shipped CONUS. Pics available upon request Cleveland CG10 60* (bent to 58*, 2* flat) – custom finish, satin, sandblast face, box grooves, black two dot,- shaft x100 soft stepped, 35 ¾ ins D-5, – condition like new - $125 Cleveland CG10 54* (bent 2* flat) – custom finish, satin, sandblast face, box grooves, black one dot,- shaft x100 soft stepped, 35 ¾ ins D-5, – condition like new - $125 RAC 50* (bent 49*, 2* flat) – satin-chrome, 2 dots on hosel, - shaft x100 soft stepped, 35 ¾ in D-2, condition – 9/10 - $125 RAC 60* (bent 58*, 2* flat) – raw finish, DG SL x100 soft stepped, 35 3/4in D-6 – condition 8.5/10 - $75 MacGregor MT Tour 60* (forged….bent 58*, 2* flat) - custom finish, satin, sandblast face, box grooves, shaft – PX 6.0 – 35 ¾ ins, D-6, Condition – 9.5/10 (hit a few times) - $125 Scratch Zodia Grind 56* (bent 54*, 2* flat), black with red letters “Tour Sand”, condition 8/10, HEAD ONLY, condition – 8/10 (steel is good shape, grooves are sharp, the black wore off very quickly) - $75 Scratch Satin custom grind 60* (bent 58*, 2* flat) - shaft NS Pro 1050 stiff, 35 ½ ins – D-5, condition 8/10 - $90 Email and Paypal is [email protected]

Labor Day Putter Sale - All prices Paypaled and shipped CONUS. Pics available upon request Hiro Matsumoto MB-01 - 8.5/10 condition with head cover - length 34 ½ ins - $200 Rossa Daytona ASGI – 9.9/10 with head cover – length 35 ins - $110 C-Groove Olivia – 9.5/10 – with weight kit (head can be adjusted from 330gr to 370gr) – length 34 1/2 ins - $120 Ping WRX (green hosel) – 9/10 – with fancy, hard plastic head cover – length 34 ins- $100 Ping Pal 2 w/ Aluminum pixels 8/10– with neoprene Ping H/C – length 35 - $70 Breeds Golf Limited Edition (satin, milled) – 9/10 - with H/C - length 34 ½ - $125 Email and Paypal is [email protected]

I have tried the Daytona, Corza and the Suzuka. Corza didn't work for me. A little bit of a hook/pull set up. Could have had a lemon..??? Daytona is very nice. If you like the Anser style. Suzuka works for me and is ITB as I like the mallet style. Actually reminds me a little of my old Scotty DelMar. All putters roll the ball exceptionally well. ASGI....No hype here....just technology that works as advertised!.....IMHO Cheers, Rodfern

Lennie....Replied to your email.

email sent

Also noteworthy is that the new 3wd has a graphite shaft. The old one was steel. Probably contributed to the bump in distance. Since he uses Mitsu Diamana, my guess is the 3wd also has a Mitsu shaft.

Took a chance on RossaTour in spite of the banter on earllier post regarding these shafts. Pleased to share that the goods were as advertised, shipping was VERY prompt and the price was great ($110)!java script:emoticon(':cool:') Cool This TSGer was a good person to do biz with IMHO. Would buy from him again. Not sure how the XX will work for me, but I will find out this weekend. Thanks! Rodfern

Sent PM....no answer. Is this deal for real?

Good observation Br61! I recall seeing his iron specs in Golf Digest. Swing weights were in the low E range! Said he likes them heavy to help with tempo.