fairwayfinder

I'd be interested in a Motore Speeder VT Stiff and very little cash for this putter

They do nothing feel wise. Its really cool for alignment. This is as solid a DASS bettinardi as you will find. I have about 15 BB1 dass heads. This is my favorite of the 3/4 offsets

Sorry its too stiff and heavy for me. Stiff in the mid to upper 60, 73 gram max I could do

I have a great 350 gram BB1 DASS Its very unusual because it has a sight dot, flange line, and two slot! Stamped Tour Special. 3/4 shaft offset Stainless Steel DASS! 35" Gamed for about a season, perfect shape. Will include Bettinardi Headcover White tour grip and tour shaft band Would trade for NEW high end golf shafts, TP6/Longest Yard/ect Sale price $475 including Cont US shipping All others pay actual shipping Only two pictures are loading for some reason. More if needed

Wow played this shaft today. Took the 7F09 X and installed it tipped 1/2" in a 5050 14.5 deg adams head. I hit it 8 times on the range, all off the ground. I don't usually hit this club off the ground but on the range I hit a nice mid ball flight Hit 3 dead straight, 2 baby draws, and a few baby fades all on command. I was very excited to try it on the course. I hit driver all day off the tee, but hit two 3 woods on par 5s. Both were excellent! Very easy to load but with plenty control. The shaft kicks hard and sends the ball screaming. Hit one 250 into a huge wind. I have never hit a 3 wood that far off the deck and I had a solid 15mph right into my face. This shaft is the real deal!

Thanks, I'll get it in today I hope. I'll tip the stiff about 3/4" and stick it in my 5050 14.5 adams head and see how it goes. Matt

Anyone with some time under their belt with the F Series fujikura? I have a 70 gram on the way to test out. Matt

SOLD

Still Available, big price drop to $200 shipped and paypalled cont us

To add the small blackening on the paint is because I prepped it only to the bore. The tip prep is very short right at 1" the paint is slightly darkened but it will be significantly covered or you can easily remove that part of the paint.

Nope tip is perfect! I guarantee it. It has some left over epoxy on it that I will remove using a heat gun. I pulled the shaft its as good as they come. It is a 6x I'm very sorry X flex untipped at 43 1/8" paypal is [email protected]

43 1/8" gripped with Multicompound Black/White $250 or best offer Matt

I have found a great wedge, well sort of. I bought a set of Tour Seida Yururis 52,56, and 60 and they perform really well The 60 is a shinning star of the set, the grind is TOP notch. Love the wedge, perfect in almost every way The 56 and 52 have way too much offset. Why they don't have the same as the 60 I don't know. The 60 spins like a top, I can hit it from any lie. The chrome is a little too clicky for my taste. But in a 60 it doesn't matter. Plus it will hold up well. Looking around at wedges, I need a 52 and 56 the same as the 60 Tour Seida with less offset. Some offset is fine, but a normal amount. I bought a set of Miura wedges and they have a nice grind, and feel butter smooth, the 52 is nice but the 56 toe is really "low" making it hard to allign, so I'm back at ground 0, they are zero offset which is tough for me too. It looks to me the Miura Clevelands are the way to go, but man they are expensive. Am I missing something Looking for: Chrome or satin Soft wedge (miura would be great) Medium narrow sole grind Cool looking Small amount of offset Thanks Matt

Paypal sent on these wedges thanks matt

Price Drop $130 shipped and paypalled

I have been playing this shaft on and off for about 8 years. Its my favorite. High launch (not real high) medium spin. GREAT feel and ultra consistant. Best shaft I have ever hit. I have another one so this one can go. I currently am playing a 660 which I also love. Great fuji old school shafts!

I have a 671TE X Stiff untipped shaft in my 460TP head that I would like to sell Its playing length is 44 1/5" $160 shipped and paypalled Cont US

I have a great 200 tour Smoothie 15 deg SOLID club. Sits about 1/2 deg open and if anything is fade bias. Its in very good shape with a little browning under on the head from probably opening it up a little. Only minor brush marks in various places. I wouldn't rate it because of its age but if going off a 10 or 10 being new its about a 7.5 to 8 NEVER Released to the public. Great off the fairway or tee, especially off the fairway!Playing length looks to be 43" with a tape and shaft raw length is about 41 1/8" Shaft is Fujikura HM-4 Stiff - This was NOT a pull I installed it new. Its tipped 1 5/8" which is not much for this shaft plays to a true SX flex. Shaft specs are about 110 grams but counterballanced to about 75-80 grams. Mid kick high lauch and EXPLOSIVE feel. Torque is very low also. Golf Pride TOUR wrap grip Shaft cost me $200 by itself. Selling for $300 total club or $175 head $125 shaft. BTW I have a Diamana BB 73 X untipped driver pull I can install for the same price. Trades would be Driver or 3 wood heads nice stuff. TM Tour heads/Epon heads/ect...

Shaft price drop $100!

Head is sold only shaft is left!

Price Drop on R5 tour I will split the club up. The shaft would make a great 3 wood shaft! Matt

Head is sold only shaft is left! Fujikura 761TB X flex tipped 1/2. Shaft is a VERY expensive Fujikura Tour only shaft. I pulled the grip and I see its extended .85" Previous owner didn't disclose. Shaft works very well in this head and would be a great shaft for a 3 wood! If it doesn't sell I'll keep the shaft for my own. HEAD ONLY $155 Shaft $125 REDUCED Shaft only $100

The two I like best (my swing speed is much like yours) Fujikura TRTI46 Fujikura Tour Platform 27.3 Fujikjura TW series All great shafts Kick the ball up with an active tip. Helps elevate the ball and turn it over. Matt

1st Fujikura 857ProTi X Stiff tipped 1" (don't be scared at all play like a SX Flex) gray in color. Looks great. Highly regarded as one of the best fairway wood shafts ever made. Hits flat and kicks like no tomorrow. $200 2nd Fujikura Tour Only Rombax TP62 stiff. This is no ordinary Rombax TP Taylor made shaft. It has a higher kickpoint. Plays very much like a 660 fuji. I just played this shaft 18 holes and it really is a stable shaft. Purchased new. No tip trimming Plays at 45.5" in my Burner head, so you have room to tip or but cut to play to specs. Ultra smooth shafts. $150 One time pull just purchased from a 100% tour only source. They will be sold without grips or I'll leave them on for $5 each extra. Wanted- TWO Fujikura HM-4 Counterballanced shafts. Please send PM on weights and flex. If you know trimming that is fine, if not I'll ask you measurements from tip to graphics. This shaft must have been made for me. Its a strange bird, but me and it get along. I will trade either shafts above for one. I'm looking for one driver length!!!! Matt

I counterballance most of my clubs, but teh HM-4 and I just get along VERY well Even at 100 grams I want to play on in my driver. Matt