sam2011 Posted January 27, 2005 Report Share Posted January 27, 2005 whats up y'all? i have vokey satin wedges, and have been using SOS pads to clean them off...is this ok? anyone know the long term affects of using soapy steel wool on satin wedges? id like to know if i should stop using this method and start doing something else? any input is appreciated! later! Quote Link to comment Share on other sites More sharing options...
kpcw Posted January 27, 2005 Report Share Posted January 27, 2005 http://www.3m.com/us/home_leisure/scotchbr..._scouring.jhtml That is what I use every now and again on my irons/wedges. I have satin finish as well and I would not use steel wool, I think it's too abbrasive. If you want your stain wedges to rust, then taking the finish off will do it. The 3M Scotchbrite (I am not a big fan of the Scotch at this point due to JBoy) pads were recommended to me from an oldtimer. Even the 3M Scotchbrite will dullen the satin gloss so I use Noxon (see below). I use a tooth brush to get in the grooves afterwards. I finish with a nice polish with Noxon... http://www.instawares.com/Noxon-7-Metal-Po...00117RC.0.7.htm Eleven clubs...takes a while but it is worth it. I use some car polish on the driver and 3 wood. The putter gets baby oil every now and again. Karma. Take care of the clubs and they take care of you. Put the SOS Steel wool away, save that for your dishes and good luck! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.