pudgediddy Posted January 10, 2006 Report Share Posted January 10, 2006 Where in the southeast US can you go and try out tour quality shafts and be fitted a professional? :tsg_smiley_yes: Quote Link to comment Share on other sites More sharing options...
gunmetal Posted January 10, 2006 Report Share Posted January 10, 2006 Where in the southeast US can you go and try out tour quality shafts and be fitted a professional? :tsg_smiley_yes: You may want to try and contact the shaft companies that you're looking into (Accuflex, Fujikura, etc) and do a dealer locator. Next best suggestion would be to find a Golfsmith as they usually have a decent stock of shafts available. Or find a nearby Nakashima dealer. We just go HTech Prototypes that have interchangeable hosel technology. It's absolutely insanely cool (don't think club conex - not even close). I currently have mine set up with an NV Pink 55, an MCC Tour Issue 65N, a Grafalloy Blue, and a DG Sensicore. Very cool to experiement with the different shaft set ups. Quote Link to comment Share on other sites More sharing options...
pudgediddy Posted January 11, 2006 Author Report Share Posted January 11, 2006 You may want to try and contact the shaft companies that you're looking into (Accuflex, Fujikura, etc) and do a dealer locator. Next best suggestion would be to find a Golfsmith as they usually have a decent stock of shafts available. Or find a nearby Nakashima dealer. We just go HTech Prototypes that have interchangeable hosel technology. It's absolutely insanely cool (don't think club conex - not even close). I currently have mine set up with an NV Pink 55, an MCC Tour Issue 65N, a Grafalloy Blue, and a DG Sensicore. Very cool to experiement with the different shaft set ups. You may want to try and contact the shaft companies that you're looking into (Accuflex, Fujikura, etc) and do a dealer locator. Next best suggestion would be to find a Golfsmith as they usually have a decent stock of shafts available. Or find a nearby Nakashima dealer. We just go HTech Prototypes that have interchangeable hosel technology. It's absolutely insanely cool (don't think club conex - not even close). I currently have mine set up with an NV Pink 55, an MCC Tour Issue 65N, a Grafalloy Blue, and a DG Sensicore. Very cool to experiement with the different shaft set ups. I see you have Nakashima woods in your bag. I am new to some of the Japanese clubs. Are they really worth the diference. How are they better than Taylor Made TP or Callaway? I see your name is gunmetal. I am playing Cleveland irons all gunmetal. 4 iron is ta7 5-7 is ta3 and pw-8 is ta1 with true temper tx tour xstiff. :tsg_smiley_yes: Quote Link to comment Share on other sites More sharing options...
pudgediddy Posted January 11, 2006 Author Report Share Posted January 11, 2006 You may want to try and contact the shaft companies that you're looking into (Accuflex, Fujikura, etc) and do a dealer locator. Next best suggestion would be to find a Golfsmith as they usually have a decent stock of shafts available. Or find a nearby Nakashima dealer. We just go HTech Prototypes that have interchangeable hosel technology. It's absolutely insanely cool (don't think club conex - not even close). I currently have mine set up with an NV Pink 55, an MCC Tour Issue 65N, a Grafalloy Blue, and a DG Sensicore. Very cool to experiement with the different shaft set ups. I guess the HTech allows you to interchange shafts. Where do you purchase those? Quote Link to comment Share on other sites More sharing options...
gunmetal Posted January 11, 2006 Report Share Posted January 11, 2006 I guess the HTech allows you to interchange shafts. Where do you purchase those? The HTechs are not available yet. 150 Prototypes were made available to Nak dealers to fiddle with and become accustomed to. They should be available by mid-february. Nakashima has a very small operation that allows them to keep very close tabs on their quality control. I don't know if I'd say that they are better (they're certainly not worse, though) than TM, Cally, or any other of the major companies, but they are sold to their dealers in component form (ie head only) which allows a qualified club fitter to custom fit you. It's a bit more of a problem with the Major companies because you end up paying for a stock shaft that you probably want changed, cut down, regripped - in other words customized. Quote Link to comment Share on other sites More sharing options...
+TourSpecGolfer Posted January 11, 2006 Report Share Posted January 11, 2006 As far as I know Nakashima is a U.S component company with a Japanese name. Quote Link to comment Share on other sites More sharing options...
Mashie Posted January 12, 2006 Report Share Posted January 12, 2006 Where in the southeast US can you go and try out tour quality shafts and be fitted a professional? :tsg_smiley_yes: Here's a link which may help :http://www.proclubmakers.org/ There's a chap by name of Dana Upshaw in Georgia that's got a huge rep. If your near him I wud give him a shout. :tsg_smilie_wink: Quote Link to comment Share on other sites More sharing options...
migoi Posted January 13, 2006 Report Share Posted January 13, 2006 You may want to try and contact the shaft companies that you're looking into (Accuflex, Fujikura, etc) and do a dealer locator. Next best suggestion would be to find a Golfsmith as they usually have a decent stock of shafts available. Or find a nearby Nakashima dealer. We just go HTech Prototypes that have interchangeable hosel technology. It's absolutely insanely cool (don't think club conex - not even close). I currently have mine set up with an NV Pink 55, an MCC Tour Issue 65N, a Grafalloy Blue, and a DG Sensicore. Very cool to experiement with the different shaft set ups. If I order a Htech with a standard shaft and than want to switch it out to another shaft are there any fittings, screws etc. required for the new shaft in order for it to fit into the interchangeable hosel? Quote Link to comment Share on other sites More sharing options...
tsg4tch Posted January 13, 2006 Report Share Posted January 13, 2006 Where in the southeast US can you go and try out tour quality shafts and be fitted a professional? :tsg_smiley_yes: Chip Usher's page Quote Link to comment Share on other sites More sharing options...
gunmetal Posted January 13, 2006 Report Share Posted January 13, 2006 If I order a Htech with a standard shaft and than want to switch it out to another shaft are there any fittings, screws etc. required for the new shaft in order for it to fit into the interchangeable hosel? No. You'd have to pull the original shaft out of the hosel sleeve, which kind of defeats the purpose as it would be the same as pulling a shaft. Most of my pre orders have been people ordering the club with 2 or three hosel sleeves. They'll have two or three different shafts epoxied into the hosel sleeves and unscrew and insert the new hosel with shaft combo whenever they want. Perhaps the coolest thing about this is the hosel sleeve has 12 different teeth, if you will, that allow you to orient the shaft in 12 different positions to test where the orientation of the spine suits you best. I've gotta get some pixs of this up. And yes, Nakashima is an American based company owned by John Nakashima. Quote Link to comment Share on other sites More sharing options...
gunmetal Posted January 13, 2006 Report Share Posted January 13, 2006 No. You'd have to pull the original shaft out of the hosel sleeve, which kind of defeats the purpose as it would be the same as pulling a shaft. Most of my pre orders have been people ordering the club with 2 or three hosel sleeves. They'll have two or three different shafts epoxied into the hosel sleeves and unscrew and insert the new hosel with shaft combo whenever they want. Perhaps the coolest thing about this is the hosel sleeve has 12 different teeth, if you will, that allow you to orient the shaft in 12 different positions to test where the orientation of the spine suits you best. I've gotta get some pixs of this up.And yes, Nakashima is an American based company owned by John Nakashima. Pics: http://forum.tourspecgolf.com/index.php?showtopic=20662 Quote Link to comment Share on other sites More sharing options...
SwingMan Posted January 13, 2006 Report Share Posted January 13, 2006 Where in the southeast US can you go and try out tour quality shafts and be fitted a professional? :tsg_smiley_yes: Chip Usher 912-695-9420 Savannah, GA For value and selection Quote Link to comment Share on other sites More sharing options...
migoi Posted January 14, 2006 Report Share Posted January 14, 2006 No. You'd have to pull the original shaft out of the hosel sleeve, which kind of defeats the purpose as it would be the same as pulling a shaft. Most of my pre orders have been people ordering the club with 2 or three hosel sleeves. They'll have two or three different shafts epoxied into the hosel sleeves and unscrew and insert the new hosel with shaft combo whenever they want. Perhaps the coolest thing about this is the hosel sleeve has 12 different teeth, if you will, that allow you to orient the shaft in 12 different positions to test where the orientation of the spine suits you best. I've gotta get some pixs of this up.And yes, Nakashima is an American based company owned by John Nakashima. Thanks gunmetal for clearing up the new htech technology. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.