Got 'custom' fitted - turns out that my mizuno mp33/37 X100s are pretty damn good for me! (grouping 97.7!)

Anywya - the guy did say that I could get away with a softer shaft (but did say cold weather/time of year would explain slower ss), but the S300 would be to soft! So I need something inbetween... - and luckily I have already got what I can see as potentially perfect flexed shafts and heads :)

anyway, I need to put my nippons into my nc1s 3-pw, need one in my gap wedge and possibly one in my tourstage airmuscle....if the shafts 'work' - i.e.

I ordered 10 shafts from Chris - got 38.5", 38, 37.5, 37, 36.5, 36, 35.5, 35, 35, 35

now

Which goes in what? (The specs I was given)

My plan is-

38.5", tourstage air muscle 3 (38.75")

38, 3iron (38.75)

37.5, 4 (38.25)

37, 5 (37.75)

36.5, 6 (37.25)

36, 7 (36.75)

35.5, 8 (36.25)

35, 9 (37.75)

35, pw (35.25)

35, GW (35)

Will this be ok - or will it mess up the flex (if anything I would rather have them playing harder, but I think the above = more of a 'softstep?)

As said the x-100 were very good, could do with a flex in between s300 and x100, but obviously had best results with x-100 so stiffer = better for me..

I am assuming that this is 'right' in the sense the longer club length = shaft plus hosel to an extent..

Thanks for any help! (hope its clear :))

Edited February 4, 200619 yr by pucci

perfect................ just glue them now!!!

looks like a normal setup.. should be fine..

thanks for the reply!

If I had a 2 iron, would the 38.5 shaft be the one to use? (I ask as I may not bother with my tourstage and keep it for a 2 iron or so I know thats the shaft to pull . I.e so that club is 'hardstepped' - but only that one?

thanks!

Edited February 5, 200619 yr by pucci