Posted May 20, 201113 yr Guys after tinkering with my yonex 380 driver I have come to the conclusion That the 60+ gram shafts are too light. The quadra fex is not satisfactory and will Reshaft it with a tour ad quattro md 7 shaft I have being idle. This got me thinking I have an older epon 380 10deg that Ian thinking of playing around with.Do note his is Is an old classic and long even by today's standards. I hear its epons longest driver to date? Anyway Wondering what to shaft it with. The gd tour ad 9003 comes to mind, even the quadra 70ssounds interesting But don't want to shell out another 5bills for an experimental head. Has anyone compared the proto to the 9003? I think that the 9003 is gds top of the tops similar to the diamana Stingers etc etc. Need input guys. Thanks Edited May 20, 201113 yr by Spoon
May 20, 201113 yr Author Hey C, how about the tried & tested oban devo 7? U don't have any left? I will not revert back to the dark ages hehe. Once you try the 80ts hard to Try anything else. I'm thinking the proto but also am curious about the 9003 And even e stinger but those are sooooo hard to find.
May 20, 201113 yr Author Yea lol :) but it just going to get a little expensive. Tell me about it. Il do a head to head yonex380 vs epon380 . Winner gets To stay in the bag
May 22, 201113 yr I had the P9003 in a Epon 101, truly great shaft one of my biggest regrets was selling it........at the time i had that and my current 101 FEx the FEx won out obvoiusly but i still rate the P9003 highly, launch is higher than FEx low spin and easier to turn over. a lot better than the DI series IMO......i think it would work well in the smaller head
May 22, 201113 yr Tell me about it. Il do a head to head yonex380 vs epon380 . Winner gets To stay in the bag Will any of these 2 beat the 102/quadra is the question.
May 23, 201113 yr Author I had the P9003 in a Epon 101, truly great shaft one of my biggest regrets was selling it........at the time i had that and my current 101 FEx the FEx won out obvoiusly but i still rate the P9003 highly, launch is higher than FEx low spin and easier to turn over. a lot better than the DI series IMO......i think it would work well in the smaller head tired of second quessing. the proto 7s would be the real deal. the 9003 would be awesome and probably the winner if the quadra was not in the picture but since it is, bad luck for any other shaft! as for it kicking the 102 quad off the bag, possibly. if theres anything that can this could be it.
May 23, 201113 yr The 380 Technity! That has to be one of the best small heads of all time. A heavier shaft definitely works well with the smaller head as it creates stability and almost 3 wood like control.
May 23, 201113 yr Author The 380 Technity! That has to be one of the best small heads of all time. A heavier shaft definitely works well with the smaller head as it creates stability and almost 3 wood like control. yup thats the one! mine however says technity 360 on the sole. is this a 380cc head? i have heard that this is one of epons longest drivers to date and a perennial favorite. hear its even longer than the 102 provided you can hit it in the smaller sweetspot.
May 23, 201113 yr Actually C there was a 360 model and even a 340 and 320 in earlier years. The 380 did say 380 Technity or Technica while the older models 360 and lower said Technica I think. T
May 23, 201113 yr Author Actually C there was a 360 model and even a 340 and 320 in earlier years. The 380 did say 380 Technity or Technica while the older models 360 and lower said Technica I think. T oh shoot i think i have the 360, any info on this?
May 23, 201113 yr Author That's the 360 but its close to the 380. Ah thanks I guess I will have to have both:)
June 16, 201113 yr Author here is the finished product guys after going thru a week long process of coating, glazing etc. it looks ten times better than the original persimmon paintjob. words cannot describe how it looks in the flesh. on the tee under the sun it looks very very hypnotizing. has a 3d like effect just like the red burlwood trim you see in european luxury cars. it is currently shafted with GD 9003s but may pull the shaft and just use it with the 360s bigger brother the technity 380cc which may get the special finish as well. what do you guys think?
June 16, 201113 yr im flabergasted.! i want one................... i want 2........... i want this one! what an utterly fantastic looking club. 10/10 when u get sick of it u know where to send it! Edited June 16, 201113 yr by supo67
June 16, 201113 yr Author im flabergasted.! i want one................... i want 2........... i want this one! what an utterly fantastic looking club. 10/10 when u get sick of it u know where to send it! i doubt i will ever get sick of it as im pulling the shaft today! will most likely get the 380cc treated this way and use that as a gamer. but its yours should i ever think off unloading it. may even get some of my gamer woods with this treatment!
June 16, 201113 yr Author mate ill do that for sure! how much is it ? apparently it was a one time thing and only for this head. so this will be the only one.
July 12, 201113 yr Author ok my 380cc technica forged titan arrived today. LOOKS STUNNING. small little bugger same size as my old yonex. this will be much much longer though. according to Chris and Gocchin a favorite with the guys at endo. taking this to the fitter today to be mated to the GD 9003 shaft. real excited about this one. if the shaft works i am defintely pulling my quadra proto fex 65s from my epon and getting the proto 75s here are pics of the head
July 13, 201113 yr Spoon, That's the second great paint job you have put on the 360. Seems to me you have a great treasure somewhere. Shambles
July 13, 201113 yr As much as I like the wood look on the 360... that 380 is perfect. That last top view pic has me seriously wanting one - I'd liked the look of the new 380 yonex but reports of not so good sound/feel were disappointing, and as i'm using an Adams 9015D which sounds/feels better than any other modern 460cc driver i've tried... Would love to hear how it sounds - take a video if possible, please! I say this because a family friend used an Epon driver for a while and the sound was quite unusual in a good way - almost soft and a kind of thump to it rather than hideous crash/ting sound. I shall have to see if there are any kicking around in Bangkok.... That is what 'pear-shaped' means, i've seen some terrible round backed heads optimistically described as pear-shaped....
July 13, 201113 yr Author As much as I like the wood look on the 360... that 380 is perfect. That last top view pic has me seriously wanting one - I'd liked the look of the new 380 yonex but reports of not so good sound/feel were disappointing, and as i'm using an Adams 9015D which sounds/feels better than any other modern 460cc driver i've tried... Would love to hear how it sounds - take a video if possible, please! I say this because a family friend used an Epon driver for a while and the sound was quite unusual in a good way - almost soft and a kind of thump to it rather than hideous crash/ting sound. I shall have to see if there are any kicking around in Bangkok.... That is what 'pear-shaped' means, i've seen some terrible round backed heads optimistically described as pear-shaped.... Thanks shambles! Coops, I hace scoured Bangkok none to be had. I liked the yonex but it felt tingy , now this 380 Is one of the softest feeling drives you will ever find. Soft and springy is what I like to describe it. Something like he old technicity zr but softer and more compact feeling. Ultimate 380 compact true pear shaped ballistic cannon. Thanks to gio who shipped it all the wAy From the Uk for me. This used to be GOcchin's many many seasons ago.
July 13, 201113 yr Author Looks awesome. Keep us posted C! Will most certainly do. Playing this at 45 d2 265 cpm. Did not want to play it too stiff, also did not want to Tip the shaft, cut the butt only. Had it spines and playing The shaft spine at 6ocklock for maximum distance. Could Have optednfor 3 oclock for accuracy but that's just boring. Will be playing Tom and if this one works, I'm pullingbthe FEX proto 65s and getting the 70s for my epon
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.