sandee11 Posted May 28, 2011 Report Share Posted May 28, 2011 Hi everyone,I m new to jdm gears.would like to know how these two brand's driver compare.heard that yamaha are forged by endo which is the same as epon.what's your thought,lOoking to get a jdm driver. Thx for the inputs Quote Link to comment Share on other sites More sharing options...
supo Posted May 29, 2011 Report Share Posted May 29, 2011 (edited) well....., after hittitng man y and varied of both id say the EPON are a softer feeling club that the yamahs, but yamaha are longer they release a new range ever yyr , just a slight upgrade form previous yr, the feeling has gone from slightly pingy to a lot more full sounding and solid. the new tour model is the best they have done , but ithink th 08 is the easiest to hit . this is in the V series stunning clubs the epon 101 and 102 are wondeful as well.' the 101 being slightly more workabke nad i found slightly higher in lunch the 102 lower straighter and more roll theres so much data on here about these 2 culbs. what ever you choose out of these u will be guaranteed driving pleasure and length theres none better than the other IMO they re all absolutely sensational maybe other guys can chime in on the D series yamahas and the 151s et all............., Edited May 29, 2011 by supo67 Quote Link to comment Share on other sites More sharing options...
shacco Posted May 29, 2011 Report Share Posted May 29, 2011 Haven't hit any Epon Drivers but I do own a Yamaha V201 10° Driver (2010 Model). Therefore, I am a little biased. I cannot emphasize enough how good this thing is. Combined with the proper shaft for you it will be a weapon. The V-Series is the players' model. It's certainly not the most forgiving driver out there but it is forgiving enough for me. And I am nowhere near the player type category. Sound is very muted which I like. Feel is very soft which I love. Looks at address is perfect. It is 460 cc but it hides it very well. It's rather compact. I had the same head in 9° and it was really low launching. I had trouble getting it up in the air. But my SS is around 98 mph. The 10° head on the other hand is much easier to handle for me. Had the longest drives of my life with this beauty. I guess you would have to specify a little what you are looking for in a driver. But I guess you can't really go wrong with either brand. Quote Link to comment Share on other sites More sharing options...
sandee11 Posted May 29, 2011 Author Report Share Posted May 29, 2011 I actually tried my friend's epon 102 with kaili 60s,kind of too light and long,46".so can't really tell if I like it or not.I actually hit the best with R7425TP 9.5 with diamana blueboard 83 stiff,now using superdeep with Accra se80 stiff shafts.was trying to go with lighter shaft (60-70g)but no luck,can't feel anything,took a year to realize that I need heavier shafts.....feels like the TM,Nike ......etc brands driver feels dead after a year or so.....Hopefully these jdm drivers live up to their price tag. Quote Link to comment Share on other sites More sharing options...
skippercarey Posted May 29, 2011 Report Share Posted May 29, 2011 I actually tried my friend's epon 102 with kaili 60s,kind of too light and long,46".so can't really tell if I like it or not.I actually hit the best with R7425TP 9.5 with diamana blueboard 83 stiff,now using superdeep with Accra se80 stiff shafts.was trying to go with lighter shaft (60-70g)but no luck,can't feel anything,took a year to realize that I need heavier shafts.....feels like the TM,Nike ......etc brands driver feels dead after a year or so.....Hopefully these jdm drivers live up to their price tag. Order the Epon to your desired weight/specs and you wont look back, will s**t on the TM and Nike drivers!! Quote Link to comment Share on other sites More sharing options...
supo Posted May 29, 2011 Report Share Posted May 29, 2011 i was going to say either the epon 102 j beam 435 or yamaha v and hit some gooduns, its such a nig foeheads, and shaft has to be crazy tj of crazy black really wit those ss or the new sigma 50 in 83 gram i used that agn on sat and hit some great piercing shots u might neeed smethingthat heavy, in that epon head, oh boy...! Quote Link to comment Share on other sites More sharing options...
Spoon Posted May 30, 2011 Report Share Posted May 30, 2011 Order the Epon to your desired weight/specs and you wont look back, will s**t on the TM and Nike drivers!! any of those epon/yamaha heads will blow any tm nike combo! Quote Link to comment Share on other sites More sharing options...
Eca Posted May 30, 2011 Report Share Posted May 30, 2011 Maybe maintain your shaft weight class with either yamaha or epon head then tinker with jdm shaft later on. I just had my taste of a JDM head and I'm blown away so crazy shaft is next. Quote Link to comment Share on other sites More sharing options...
sandee11 Posted May 30, 2011 Author Report Share Posted May 30, 2011 I think I might try yamaha 1st since the price of epon driver head is really high,around 720US for head only here in Malaysia. Not cheap at all! Need to check the price for yamaha too....Thx for all the inputs thou. Quote Link to comment Share on other sites More sharing options...
Eca Posted May 30, 2011 Report Share Posted May 30, 2011 You can't go wrong.. Check Bst I'm sure Stew had a head and shafted one there (supo67) Quote Link to comment Share on other sites More sharing options...
sandee11 Posted May 30, 2011 Author Report Share Posted May 30, 2011 Yeah.....tempted but have to wait coz I just bought a set of yururi iron from him.... Quote Link to comment Share on other sites More sharing options...
Eca Posted May 30, 2011 Report Share Posted May 30, 2011 Lol! I know the feeling :) Quote Link to comment Share on other sites More sharing options...
Spoon Posted May 30, 2011 Report Share Posted May 30, 2011 Yeah.....tempted but have to wait coz I just bought a set of yururi iron from him.... Ask him for a package deal His yamaha driver is first rate. A steal infact Quote Link to comment Share on other sites More sharing options...
Eca Posted May 30, 2011 Report Share Posted May 30, 2011 Ask him for a package deal His yamaha driver is first rate. A steal infact yea and matching wedges too :) Save on the postage. Truly he's got great stuff. Quote Link to comment Share on other sites More sharing options...
rb2235 Posted May 30, 2011 Report Share Posted May 30, 2011 (edited) Any one know which year this model is..Yamaha Inpres X 4.6V RPM? Seller takes you to a video from GDO and title says 2009 but I don't speak Japaneese. Thanks Edited May 30, 2011 by yourpressed Quote Link to comment Share on other sites More sharing options...
Spoon Posted May 30, 2011 Report Share Posted May 30, 2011 Any one know which year this model is..Yamaha Inpres X 4.6V RPM? Thanks Is that the 440 or something? I have something like that but am not sure from 2005 2006 really hi cor and non conforming. Il verify if that's the same one I have Quote Link to comment Share on other sites More sharing options...
rb2235 Posted May 30, 2011 Report Share Posted May 30, 2011 Is that the 440 or something? I have something like that but am not sure from 2005 2006 really hi cor and non conforming. Il verify if that's the same one I have I found it I think in this thread...Thanks Spoon http://forum.tourspecgolf.com/topic/28462-fs-2009-yamaha-inpres-x-46v-rpm-10/page__p__155303__hl__%2Binpres+%2B__fromsearch__1#entry155303 Quote Link to comment Share on other sites More sharing options...
shacco Posted May 30, 2011 Report Share Posted May 30, 2011 Any one know which year this model is..Yamaha Inpres X 4.6V RPM? Seller takes you to a video from GDO and title says 2009 but I don't speak Japaneese. Thanks I'm pretty sure this is the 2009 Model V4.6 rpm. Quote Link to comment Share on other sites More sharing options...
bogeydog Posted May 30, 2011 Report Share Posted May 30, 2011 2009 Quote Link to comment Share on other sites More sharing options...
supo Posted May 31, 2011 Report Share Posted May 31, 2011 2009 model. they altered the base on this significantly from 08 , its was ana gressive alteration, the sound is totally differnt form this model on to the previous models , this one is MUCH better, and the newer ones even better, i actually think this model is maybe the best they made. its solid for palyers but not a tour version that excludes 95% of the people form palyng it. the newer ones are bigger in body and slightyl easier to hit ,but this one get the job done so well. id say if ur a b grade or better this is one beauty of aclub. i made this for a mate of mine 2 months ago nad he clobbers the day lights out of it ans he weighs 66 kilos and get sh tball out there about 270 withtis thing about 20yards more than the yonex nextage form last yr. i cant get this outta his hands to even try the new model. i shafted it with a tour stage ad 6 s as well, awsome combo. mid flight straight . lots of run very very good head this great design. i think bogey dawwwwwwwwwg loves this one as well. Quote Link to comment Share on other sites More sharing options...
rb2235 Posted June 1, 2011 Report Share Posted June 1, 2011 Thanks for the info everyone. Maiden voyage today paired with a Ozik Altus and depending on how that goes the Kai'li this weekend. Supo, your knowledge base on all this gear is impressive and appreciated. Love your videos. Quote Link to comment Share on other sites More sharing options...
supo Posted June 1, 2011 Report Share Posted June 1, 2011 living in the belly of the JDM beast does this to you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.