Hi all, looking for deep face ut and fw clubs.

I currently own 2012 onoff ut and fw.

I measured 5w about 1.55" (39mm) and 21* and 24* hybrid about 1.5" (38mm)

For RI Duffer – I heard you are playing ibrid. If you are, do you happen to know the face height?

TBP,

My i-grids are packed up for a trip I can get the measurement for you next week. What I will say is that the ONOFF Type S have a deeper face than the i-Brid. So if the deeper the better than I would recommend the ONOFF. I play those as well and am very fond of their performance.

Thanks! I do have the 2012 onoff... Is that what you have?

I have one of those, yes. The design has not changed very much since, at least, '11.

I know it is not jdm, but you can have a look at the adams a12 pro hybrid.

Sent from my Galaxy Nexus

I checked the A12 and they are about the same height.

I bought RI Duffer's old RomaRo Type R UT. 35MM face height depth is 62, The Titanium cup face makes this a rocket launcher for me. Easy to hit and very long. I have the 18* and really question whether or not I need a 3wd.

I see you use a lot of Miura irons. The Miura HB3 hybrids are almost 1 3/4" in depth and, for me, are the best hybrids I've ever hit. Long, smooth, no ballooning.

I have many UT's in rotation now.

ONOFF

TourStage

Yamaha

RomaRo Type-R

George Spirits

My two favorite are the RomaRo Type R & George Spirits with the TourStage coming in third. That said I like mid depth FW's deep are as RD says the ONOFFs are deep so are the TourStage FW's.

Don't overlook the Type R and GS though, the shape of those two from above beat any UT imo.

How does the older UT compare to the Type R?

I have the older Romaro, not the new Type R. The new one is supposed to be even more forgiving, which seems impossible to me. I have the 18* and the 24*, the ti cup face makes these things incredible. Played 49 holes of member guest this weekend and every time I hit the 18* I got a what is that thing remarks. Not coming out of the bag. I am an 11 index, so not a low capper by any means and I think I could go Driver, 18* and skip the 3 wood it is that long and good. There are 14 non par 3's on the course and I bet I hit it off the tee on 6 of them, plus into the par 5's. Very versatile.

TSG,

What kind of shafts do you have in your UTs?

How deep (face depth) is the Tourstage FW?

Edited June 25, 201311 yr by TauBetaPi

TSG,

What kind of shafts do you have in your UTs?

How deep (face depth) is the Tourstage FW?

I usually play stock steel because it flies straighter for me but have gone back to the Crazy Utility in stiff. I may have to tip it a little but I think after that I'm good with it. I can measure the faces for you in a bit.