sunshine8 Posted August 14, 2016 Report Share Posted August 14, 2016 (edited) Looking for ideas for a Stenson- inspired 3 wood; what are some JDM head and shaft combo ideas? Maybe JBEAM TF in 13.5 degrees, what shaft to make a monster 3 wood that a 10 handicapper can hit? Thanks Edited August 14, 2016 by sunshine8 Quote Link to comment Share on other sites More sharing options...
Staxxx Posted August 15, 2016 Report Share Posted August 15, 2016 I love my driver substitute.....a Baldo Brassy 13.5* shafted with a Roddio, which I hit on several holes on our course here. In fact yesterday went out and played without my driver on a 6,800 yard course and it worked great! It's about 20 to 30 yards shorter than my driver but never leaves the fairway. Quote Link to comment Share on other sites More sharing options...
driverhead Posted August 15, 2016 Report Share Posted August 15, 2016 Maruman Shuttle. Zodia OZ. Tour Edge Exotics EX9 Longspec (off the tee), EX9 tour, EX9 fairway. Callaway Mini Driver (off the tee) Ping Rapture (off the tee) Quote Link to comment Share on other sites More sharing options...
+TourSpecGolfer Posted August 15, 2016 Report Share Posted August 15, 2016 12 hours ago, sunshine8 said: Looking for ideas for a Stenson- inspired 3 wood; what are some JDM head and shaft combo ideas? Maybe JBEAM TF in 13.5 degrees, what shaft to make a monster 3 wood that a 10 handicapper can hit? Thanks So you basically want a FW you can hit off the tee and get great distance. a few things: - shaft is a huge part of this equation. - face depth and size of the FW's head is of vital importance, too shallow and your screwed, too deep and (for most) it's not as versatile off the deck. - material of the face, imo stainless steel will not give you the distance you will require something a bit more thin and flexy - Ask yourself if this is a dedicated FW club and you have a spot for it in the bag along with a 3 wood off the deck because the length, specs, face depth and material would be different for a tee box bomber. Quote Link to comment Share on other sites More sharing options...
sunshine8 Posted August 15, 2016 Author Report Share Posted August 15, 2016 Thanks for the great ideas guys. Chris, your points totally make sense. I think titanium head is the way to go for this and and high modulus shaft for launch and dispersion control. But the ultimate question is bag setup: does this club relegate the driver to just a few holes per round, and then how do I squeeze in a 16-17 degree club to hit off the deck? Oh well fun "ho" problems! Quote Link to comment Share on other sites More sharing options...
Staxxx Posted August 15, 2016 Report Share Posted August 15, 2016 I carry a driver (9.5 to 10.5), the 3 wood for only off the tee on tight holes and a Zodia OZ 18* off the deck. The problem I have is I also like to play four wedges (PW, 52, 56 and a Frog's Leap 64* with which I seem to hole out several times from bunkers). If you play a standard 3 wedge set up then there is no problem configuring the bag. My scores have never been lower since using the driver only when it is safe to bomb it (about 3 holes each half) and using the 3 wood on the other par 4s and 5s. Hope that helps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.