jamnguy1

That's interesting. These shafts seem pretty sturdy to me. But then I didn't have a bag fall on it. I guess it depends on the bag, how big and how much it weighed, and also the angle at which it impacted the shaft.

I'd have to guess that there is some atypical swing mechanics like catching the ball way up on the upslope of the swing to be using an 8* loft with a 95-100mph swingspeed. That said, the CRZ450 is not the easiest driver to hit and launches low. The COG on that driver has to be much higher than the average driver. Because of that, it is an incredibly workable driver in the right hands. The 456 definitely will launch higher than the CRZ450 for same listed loft. My personal impression of hitting these two drivers is that the CRZ450 will have an effective lower loft than listed, and the Kamui 456 higher launch than listed loft.

This is one of the reason why I stick to more traditional lofts. I like my PW 48*. In fact, in the really old days, the loft of a modern day gap wedge was a pitching wedge, and lofts have been increasing ever since along with company's claim that their irons are now longer in distance. That and the ever lengthening driver shaft length. If he is actually hitting longer, then the longest iron will likely come closer to distance from either a hybrid or a wood. In that case, he can drop the long iron or drop a hybrid or wood. If this is the case, he can add a 48* wedge. On the other hand, if he just wants to replace the big gap between the strong loft PW and his 52, he could get a 50, keep the 56 and drop the 52 and 60. Learn how to work each wedges and especially learn how to open the face up on the 56. It all depends on what kind of distance and results he is getting from the epon. I used to be a 52-56-60 guy myself. My wedge play improved and I went to 52-58, and lightened the load on my walking bag. Frankly, I even feel that I can get rid of the 52 and 58 and play with just a 54 or 56. You can play so many shots from each individual club in the bag. It's sometimes fun and good practice to go out (on the right course, that is) with just driver, a 4 wood, and a few irons, one wedge and putter. Remarkably, total score may not differ much.

Shafts are the real deal. I have about 5 of them in different flexes just to find the right one. I do think the crazy wedges are as good as any I've played. I think it just depends on the right setup, and the shafts will perform. Right now, I can't see myself playing any other shafts.

This is one of the best putter available. I actually like feel of the Fe better than the SUS303. A year ago I was saying the opposite.

when can we expect to see these in the proshop?

I recommend you stay away from the Superdeep.

Seven Hills, very versatile wedge I really like the standard grind on these The feel is a pleasure to hit

Softer feeling than the 5003. The last of the traditional Miura blades. If you have game, you won't be disappointed. If your buddy doesn't like them, he can PM me.

I have the type D 10*. Sound is a bit hollow for my taste but acceptable. Feel is good. More of a shallow face which tends to be less workable. Launches higher than stated loft which may be due to it being a higher spin head or maybe higher launch shaft. Probably the weakest part is the shaft which plays softer than true flex. Also, the length of shaft on mine was 45.75" so the head must be light to get D1 SW (I measured D0). This may have implications if you are going to reshaft. It's draw biased, so if I get too aggresive it goes left in a big but not so good way. Have to be a smooth swinger for this stock setup and let the club do all the work. I think if you're a 10 or below handicap the V201 would be better.

I'm sorry T. I meant both for you and Tourspecgolfer. :) I would love to have a set of irons that feel just like these. So I'm eagerly awaiting the good news.

I got thorough testing out the Seven Hills Wedges, and the feel on these wedges are fantastic. I thought to myself that there was a set of irons like these, I would definitely get one. Anything out there that comes close to these in terms of irons? Obviously a question for Tourspecgolfer

I have the Crazy TJ-46, LY-01, LY-02 and Quadra shafts. I've been slowly experimenting. So far I've only shafted the LY-02 and TJ-46. At first, I really liked the LY-02 over the TJ-46 but the TJ-46 has slowly won me over. Both have similar characteristics, but the TJ-46 has a little better feel and I've found it to be slightly more consistent for my swing. The LY-02 seems to have more kick to it compared to the TJ-46. This week I'm shafting the LY-01 and Quadra. First impressions on the range and impression after several good rounds can vary. Once I get the Quadra shafted, I will try to give a comparison.

If you hit and liked the 302, I would go with that. You know exactly what you are getting. I can tell you the other 3 choices are good also, Tourstage are usually soft, OnOff easy to hit, Yamaha a little more solid feeling. But if you have the luxury of trying out an iron and liking it, then stay with it.

my same experience plays quite stiffer than stated flex compared to other brands

caveat emptor

I believe the 302 has more perimeter weighting than the burner tp. The burner tp, I would consider as a mixed set. 8-PW is as a blade as there is no cavity. The cavity gets progressively noticeable as one goes to the longer irons. It also has a head size comparable to the 302, and it has very little offset and a narrow sole. I have not hit the 302 but I did hit the 301. Different in feel for sure, but it's hard to say one is more forgiving than another. For me, a mis**t is a mis**t when you're not hitting the sweet spot. A mis**t is always a bad shot. More forgiving clubs for me are ones that gets the ball up in the air easier with the same ball strike.

So true

Thanks. Now I know what that's for.

I notice that every high end graphite shaft has a notch or a mark at the butt end tip. I assume that this is for alignment.

I can give at least 7 different answers and I think they are all the best.

I agree. There are so many variables involved. I had mentioned in another post that the 3W head I used was very light for what it's worth. I not a club techie. I just know I the club/shaft feels to me. It is the best shaft I've played

The 3W head I had was a very light head, almost similar to a driver head weight. This may explain it.

I have the FW80 in a fairway wood and by "forgiving" to mean "stable" then the crazy shaft is it. Interestingly, it also feels "soft" and not harsh. I don't really care much for CPM as I'm not technical, and I'm not sure this makes any difference because it's a 3W, but the clubmaker tested it and with a regular flex and it came out 233cpm. I'm a believer in this company, and waiting for the driver shaft to come.