Jump to content

supo

Members
  • Posts

    9,068
  • Joined

  • Last visited

Everything posted by supo

  1. yeai i like the 2011 better a well. althought the 2012 are much easier to play ,the lines o n the 2011 are great. they are a revamped model of the 2006 which are easier again... if i had to chosse between the 2006 and 2011 i think id take the 2006 bec, they are easier. the 2011s tho are real players irons. . love that shape.
  2. nope... 108-110 is what i hit at the range with most al drivers . well its actually measure in m/ps here and im 49 +- ish.. when i hit one offs, i average about 47.5- 48 when im just hitting multiple balls. most x shafts seem to suit ok . . and 44- 44.5 inch yea no probs with p9003x.... x.... esp i n square lie of the 9.5* head. no prbs at all. not sure about the 9003s... tho never hit it., 117 i think ud love this shaft......., p9903x
  3. FOR SALE.., 45.25 inch in superb condition. no reason at all except im going o get the new one and ive played this beauty , but as it me.. its time for the new one with the diamana X to go in her.., delivers a low super strong shot.if not my most peircing running driver ive made . shaft is the ultra control shaft form crayz cb50. in 8.2 flex. plays just a little o nthe less stout side ot hte cb80 range. i hit 7,7 in cb80 nad 8.3 in this model, the shaft gets the ball up and its not really an anti left shaft ive found, i find it pretty all round . i play this in my yamah tour , and i wont be changing that combo. thsi is also the longest of all drivers ive made . over al over reuslts in normal conditions get the ball out as long as anyone would want it. its super... pm me for specific deets if needed ems paypal $1000shipped.
  4. FOR SALE.., trusty.. after buying and finally getting the zer wired, this has become idle. 45inch in terrific condition. head weight 202 gram . perfect pro cord blue, looks as good as anything out there as well. the boron feels like it plays slightly softer to flex. but its right about the mark. they say its a bit softer than the normal crazy flex, and i guess it prob about right..,i think t plays x-sx... its a mid- higher launching driver with ooodles of carry and plenty of roll ,the arc is pretty spot on. feel is absolutely superb. its small movement at my swing speed at about 108+ is fabulous. shaft has only been used in 3 games. and a few range sessions. dont want to waste this one, its too good. highly recomended. TSG info on the shaft.. ,http://www.tourspecgolf.com/product_info.php?products_id=3658 epon 101 needs no words spoken about it . any more info pls pm me. really really good driver. EMS payapl. $950 shipped.
  5. good to hear. glad u likeing it. its a very interesting , unusual head shape in deed. i think if ur a fan of things like the super deep , then this will appeal. maybe the differnce in what i get to you is the lenght of the shaft + the swing speed u e get . im playing mine at 44.5 inch , thats a hell of a lot off butt trim comapred to 46.25. and ive always said im at the beginning of where this shaft starts to perform m well, 49mp-s is prob too slow for this shaft . i dead set can not make thsi go left i iota ,ever. and i got it in the 10.5 which is .05 closed. matters not it wont hook at my SS. lordy lord 8.5* in this head wholly schomkes. that wud be a monster. i wudnt get it off the turf. keep me upadated mate im going a slighty differnt route with this head.. more info for ya in a cpl of weeks.
  6. well wait till i hit one this weekend to see if hteres a differnce in feel . the ones i sent are pretty top enders, thye certianly look very one off. but ill wait til final decision till after ive given em a side by side , i have an original mz-07 that ill test agaians the new one. regardless, man they look good.
  7. 500 of these only???? they wont make the day out on release, let alone in shops, let alone make it over seas..!
  8. the finish is a 2 x aquamarine finish , with deep milling. it came out a steely bronze the diffence in the copper yamada is well, im totally speechless.. check how it went in..., to what came back.... iamgine these copper look banged up and well gamed.., to this looking thing.. u cud imagine my smile..
  9. all done by torey rat at torey pines. huge diffference. the mizy in the flesh is absolutely the best finish ive eve seen. the oil aptina is amazing. im geetign it shafted now it will be ready tonight. i spoke to sasaya and he said he cant fix my insert o nthe 1999 hiro, best send it back to them. but the ding i nti doesnt affect the ball roll it doesn ttouch the ball. so i dont need to d oit......... but after these gawd,,,,, im going in i think, ill get a cpl more done. i have 2 more mz-07s that i might re do as well. they seriously look the nuts
  10. quite interesting the distances u can get right? there doesnt seem to be that much of a differnce for the most part, and u get more control. it may not be for everyone, but faster swingers can def consider this an option if they struggle with consistancy .
  11. hmmmmmmmmm. thats absolute music to my ears..., if anyone needs a 9.5* 435 with cb50 8.2.well thers one for sale as of NOW.
  12. the kali is a low launcher ,and a hell of a ahfst BUT i think its much better sut a bit and playeded i na fairway wood. its awsome i na fairway wood. the X is hte latest and greatest form diamana, its thier top dawg.... put it in yr best head! its low its really low spin , it feels much better than the kali in comapriso nthe kaili feels a bit thin.. the X is well, better.. i stil ahve an X that i ahvnt headed yet ,bec i m waiting for something thats awe inspiring to throw thsi into. it might be the yamaha tour fr 2013... or i t might be somehting that geetting released later this yr...
  13. recieved 2 putters back last night. very happy with the reuslts, they look superb. the face milling looks very well done ,the colour schemes are spot on. will re shaft them next week and get em out to play ASAP. TOREY RAT george i chose to do the work, and wa imensely happy with his communication, suggestions, and finished product. cost to do this was wel l worht it. i think these are very good putters that would ordinarily just sit idel and die. now i gotta put em abck to use. yea i thin k he refurb is worth it fellas.
  14. well differnt strokes for differnst swinging folks. i thought the kamui was easily one of hte bst driver heads id ever hit. it was beautiful feeling , but it hought it was a bit elongated for my taste ilike round full ones hence i love the kamui pro. the diamana X for harder hitters is a hell of a shaft. the jbeam takes some beating if at all.
  15. yup face balanced,that double bend shaft .. very tasty. this and the buttonback are the ones form scotty id like.
  16. love one of these , theres one i found here but i think thye are asking a motza for it its in perfect cond, what the skinny on it good quality ?? this one...,
  17. very good to read review. i abaolsutely loved my kamui but i bought hte wrong one! shudda got the smaller one. u put hthe diamana X into the adams?? get that into the kamui NOW...!!!!!!!
  18. yea u can get extra weights. they come in all sorts of weights
  19. its 191 ish grams something round there. a littel gel insertion and thusi thing comes alive. get ti to 198 ish and it lowers the flight and makes it a lot more punchy. can play that any length u like then. but at 191 ud need an 80+ gram shaft to make it sork, but it will prob feel a little thin
  20. they are 106cm 41.75 inch raw. played 43 inch primo cond. too stiff??
  21. yea. im dying to try these but im undecided on what to throw them into. the c10s a re exaclty what i like to feel. perfeection. the 5002s are a huge candiadte for these. if i go that route i can re shaft the af tours with the dp x instead of the stiff. make em a bit punchier. ithought about the af tours, but they are a heavy head , it may be too much with the s14s. theyreally are a LOT heavier in the wedges i ahve i love them in the marus s ill try them in the perosnals.. jusssssssssssst in case...!
  22. sorry about my typing im lazy and mutodied at it. i do it all day and my left hand cant keep up with the right. im a mong!! well.. the the monacco are classy DGs300s. dgs30s play............................ just fine , but can be a bit harsh.. the monacco are not. especially when it gets a bit cold. the monacco kinda feel like they are ruberised.. the NS blue are similar, thay can be prett y harsh in the cold. but super straight. they dont like to be moved about. in epon af tours ,the ns blues are pretty impossible to beat. spin of the monacco is variable, they are flighted so the 3-4- 5 iron , which tend to go high, esp VS the NS blues. but the scoring irons are damn straight... they seem a lot tighter. i can get the best left right cut spin rom the 8-9-pw , i mena relaly good spin, + i cna knock them down flat and they check spin sit, i didnt get that as much with the NS blues. nadi got absolutely nothing like it withte the c-tapers.. to me they just wnt dead low nothing else. i was immenslt dissapointed. maybe u need ot be a bit stronger to get the best out of them but i ddint get it what so ever. i dont get it out of the KBS tours either. they just go far. i get MUCH better spin control form the x-100s to be honest. in the miura heads t hese things are greta , they are great i nthre yonex ezone and the yamaha tours aswell. i dont mind having them in my rotationwhat so ever.. they go goooooooooooooood. distance i dont care about what so ever. i know that every monacco shot i hit withthe same club is pot on. dead set spot on. same as the modus 3. the x100s ,hmmmmmmmmmmmmmmm they kinda wander about a bit more , but its fine monaccco are tight in dispersion. sp blue are lazer like in precision they dont wander, they dont move. they go 164.5 yards every time. but u cant move em. the monacco i can /haveclubbed down . last week on the 174 yard par 3 i hit................... 20 ballsat the green (yes i repaired every divot...!) with 7 and 6 irons i was drawing(attmepting to ) withthe 7 and getting mixed results but, they were all landing pretty mu8c identical distance. then the 6 iron i was cuttuing back ot he pin , MUCH MUCH better reults. and again every one was spot on, naturally not fricken one went anywhere near the damn hole!!!! but the landing spots were...the same distance. trajectory was high and landed soft. the 7 iron is pertty high but a storng high it doesnt go straight up like say the NS1150 so, this thing kinda creeps, like the sp roange , but not really here lemme try and demonstare thru my illustartions..................,, hah look at that huh,, i FOUND the psray can option...! sugoi ne! anyway i think this is what im trying to say... the sp blues just do th esamething low .nice arc. roll plenty of roll. the x100 are slightly higher with a rounder arc. the monacco are all over the place bec they are flighted, the 3 iron get up very quickly and soars then roll out . the 7 iron something simlar but not as high to start, and the PW is low to high then drops fast.
  23. well..., all my best heads haveended up witht he monaccos in them, over the last 9 months ive just eveolved to this, it was nt acomscious decision. i started with the srixon pro 100s that i leave back in oz. with stiff flex. they are just alitle on the movement side of what i prefer to play. i cud have hard stepped them and they would be ideal. but that occured to me too late. so i left as is. ten iahd the option of shafting my ONLY set of cavities ill ever get,, the miura cb3002s............ with either the NS proto 2f15s ( ns 1150) ofr the monaccos. i chosd the monaccos here bec the ns protos went in another set of srixon pro 100s ,and they became my games till the personals popped up a few weeks ago. the monaccos in these heads are absolutely magnificent. o nce again i shuda hard stepped them bec ican get them to move about a bit, but the fligt is perfect, and with a swing weight of d9..................... yes................ i was a bit worried. then i took them out and won that mini tourny eariler this yr. dont think they gonna get changed...any century soon. the differnce in the srioxon withthe NS and the monaccos is big, i much prefer the feel and performance of the NS pros. but i play hte monaccoshafted ones very well, they live forthe links, low , strong and solid, the feel of the heads isnt as good as wit hthe NS tho. and the other set i have down under is with NS c10s ver yheavy and very punch, these have easily usurped the monacco, in identical heads. easily... the NS seems to play better in say harder compound heads, and the monacco seem to play better in the softer ones like endo stuff. not saying the NS dont play well, bec the DP shafted af tours i have are incredible, but overall this is what im noticeing. im gettign one of my sets on miura 5002s shafted with the DPx (modus3) im almsot certain, these will be kinda awsome. the 5002 heads are so much better than the other miura bladed heads ive played i cant begin to describe it. no idea why, but they are, i got these courtesy of a post by a guy on WRX ages ago who almost demnded i NOT get the 1957s nor the 5003s, he was so aggressive on it i listend and damn glad i did. bec these are miles better, but miost guys wont like them bec the PW looks "odd and off set" serisulky dumabasssssss comment ... these are his best blades (not ism made by miles. ) iwas initially going to put the monaccos in them bec the other set ihave has the x-100s and these are alomst my gamers, they have usurped the srixon pro 100s . the x100 are re gripped with perfect pro blues and they are headed down under to join some esteeeemd cousins. epon 301--monacco (unplayed yet) srixon pro 100--NS c10 srixon pro100--monacco S yamaha 2009 NON TOUR--KBS protos blacks. mura 5002 --x 100... sakamoto blades--KBStour X these babies live in oz, think i have all bases covered here. one thing ive learned , is that shaft DO play differnt in differnt heads, some suit well some not as well. the sakmotos with kbs are EASILY one club onger than everything else. easily... takes re jigging my head when i take these out. the 5iron is pretty much as long as a 3 /4 iron, just higher. weird to get ur head around. ive got a set of monaccoc tour X felx that i ahvnt haeded yet bec i have NO idea what to put them in. they are HEAVY but no more so than the c10s but they are harsher. they play amazingly well i nthe epon perosnalls, in thX flex but they dont have the elctric feel of the NS . ilike that electric twing..i really realyl like it, nothing feels looks better than whne i connect wit ha 3 iron ESPECIALLY with the srixon pro 100s and the c10s,, jee thats hard to describe u just picku p yr club , jaw agape and looking lovingly at the sole..... while the baron ,scuffs his feet ruing anothe snap hook and another payout . cant say anything about nst the c-tpaers bec im not a fan , even the protos i ahve i dont like. the kick point juts feels all wrong. its not obviously!!!!! but i just dont like em, same as i dont like DG anything except the x-100s all round shaft u can not compete with and hence impossible to beat the monaccos. the NS protos are very specific flights and id hate to go ut day in out with the c10s. the DPS hovewr ever,,,, well modus 3 exists bec of them.
  24. thats a full ENDO bag.... epon and yammys lovely touch!
×
×
  • Create New...