Radeon962

Still looking... Bill

The Tour issued 540XD have a couple of different things to distinguish the Tour head from Retail: 1. Sole plate is smooth like the R500 series of heads, rather than the drop down area around the weight port in the retail XD heads. 2. 1/2 loft is underlined signifying deep face 3. 0.335" hosel 4. "Txxxx" serial # Face angles can vary, but most of the Tour heads are square to open faced, so you never really know what or for whom the head may have been made for. Tour XD heads are generally heavier and have a better feel/sound than the retail XD which are kind of hollow and tinny. The 540XD is an awesome head for those people who need extra launch angle and spin off the driver. Kind of like a 983K on steroids. Hope that helps. Bill

I'm looking for a set of Callaway X14 PS with factory installed DGS300 steel shafts. Post here or email me at [email protected] . Thanks, Bill

Starts at $1.00 tonight after 10:30 EST.. Bill

MOVED to eBay starting tonight for $1.00 with NO RESERVE... Good luck. eBay user ID: DCI86 Thanks, Bill

Sent you a PM and email. I'll take it for $495 shipped. Thanks, Bill

Custom ordered Ping G2 10º with an Aldila NV 65 "S" tipped 1" and square face angle. Currently at 44.5" (measured along the shaft to the heel like normal. Ping measuring way would probably be 44" as they measure some other way than any other OEM) with a new Golf Pride Velvet Lite grip at a swingweight of D1. Club is in like new condition. No wear on face or sole. Paint is perfect. G2 headcover unusued and in excellent condition also included. Hit about 10 balls with it at the range and it is not for me. Might just be the disappointment with not getting what I ordered, but my loss may be your gain. Looking for trades for other OEM drivers in stiff or x-stiff flex graphite shafts in lofts of 10º or higher. No components please. Post offers here or email me directly at [email protected] . Going to eBay on Sunday night. References under eBay user ID of DCI86. Thanks, Bill

Tom, if this is the Tour 540XD, which I am assuming it is since it is described as a "TP". I'll take it for the $320 shipped. No sky marks or other nasty looking marks on top is there?? Email the details at [email protected] . Are you setup for Paypal?? I will also send you a PM. Thanks, Bill

Any trades?? Email is [email protected] . Bill

David, they were the ones that Dan had available on a few boards. I wanted to try the PX shafts to compare them to the Rifle 5.5 I have in my other set of X14 PS and the TFR 6.0 that I have in a set of X16 PS. Sad to say that the PX shafts just do not do it for me. I prefer the feel of the regular Rifle shafts. I can not ship outside of the US though. Bill

For sale or trade, either set for $400 shipped via Insured Priority Mail with Delivery Confirmation: * Callaway X14 Pro Series 3-PW with Rifle Project X 5.5. Used but still in very nice condition. NO major dings or nicks in the heads. Normal wear from use, but grooves are still very nice. Golf Pride Tour Velvet grips (logo down). No labels on the PX shafts. Standard loft, lie and length. $400 shipped * Mizuno MP-30 3-PW with DGS300. Used but still in excellent condition. Minimal marks for a forged head. NO major dings or nicks. Mizuno velvet grips. Shafts and grips are original, but were pulled in favor of a set of X100 shafts and then original shafts were reinstalled. Standard loft, lie and length. $400 shipped Will be going to eBay on Tuesday most likely if no bites here or the other major golf sites. I accept and prefer Paypal (NO extra charge for fees) or can do money orders. Pictures are available. Trade interests would primarily be in drivers and fairway woods. Especially interested in a TM Tour 540 or 580 XD in 10.5º or R7 TP in 10.5º. I can add Paypal cash to even out a deal if needed. Reference check under my eBay ID of DCI86 (264 positive and no negative). Post offers here or email me at [email protected] . Thanks, Bill

Used Cleveland Launcher Titanium 13º 3 wood with a Fujikura Vista Tour 60 "Stiff" (chrome finish graphite shaft) at 43" with a Golf Pride Velvet Lite grip. Graphics on shaft are down and up on the grip (due to the rib). Swingweight a hair over D2. Overall excellent condition. The top is perfect without any nicks or marks. The face shows marking from hitting range balls (the Launcher faces mark up easily). The sole is very nice with just the normal marks from use. I don't have the original headcover. I'm looking for a Taylor Made 200 Tour 15º 3 wood (non-Duffy model) or would sell outright for $175 shipped. Post here or email me at [email protected] . Thanks, Bill

Looking to try out a former member of my bag... Looking for an Original Callaway Steelhead 9 wood with any shaft as I would be reshafting it. Any condition is fine. Email me at [email protected] . Thanks, Bill

I'll take it for $75 shipped. I sent you a PM with my email address to discuss payment. Thanks, Bill

Anybody?? Bill

PM sent and payment made for an Aldila NVS R&D Proto 65 "X". Let me know when it goes out. Thanks, Bill

Anybody know anything about this shaft or can provide a link where I can do some research on the Mitsubishi shafts?? Bill

Nick, put me down for one (1) Aldila NVS 65 "X". Let me know where to send Paypal to. I sent you a PM with the same message. My email is [email protected] . Thanks, Bill

I have the following two (2) pullouts that I would trade for an Aldila NVS (Orange/Amber) 65 "X" untipped, in driver length of 43" or more. These were both pullouts from 3 woods, but I need the NVS for a driver. Pullout Aldila NV PROTOTYPE 85-X graphite shaft (0.335” tip). Shaft measures 41.75” from tip to the end of the grip. Shaft was tipped 1.50". Tip has been prepped 1”. Shaft was professionally removed at low heat with no damage to the tip. Golf Pride Tour Velvet grip in excellent condition. Pullout Grafalloy Blue X graphite shaft (0.335” tip). Shaft measures 42” from tip to the end of the grip. Shaft was tipped 1.50". Tip has been prepped 1”. Shaft was professionally removed at low heat with no damage to the tip. Golf Pride Tour Velvet grip in excellent condition. Post here or email me directly at [email protected] . Thanks, Bill

Looking for some info on a MITSUBISHI RAYON MAS-2 MK-L TOUR "XX" graphite shaft. Anything at this point would be good as I don't really know anything about it, but it is attached to a TM 510 DF. Specs... Value.... How does it play?? I have to believe it will be way too much shaft for me as I am a one "X" guy at most (112mph SS). Any other interesting tidbits?? Thanks, Bill

Looking for a Cleveland 588 Gunmetal 51º. Email me at [email protected] . Thanks, Bill

Any interest in selling the head only?? I tried the Fuji TR and did not care for it. Email me at [email protected] . Thanks, Bill

I'm looking for a TM 510 TP 10.5º, head only, shafted, etc. I don't have much to offer in trade at the moment, but the following might interest someone along with some cash via PP: * Orlimar Hip Ti 420 11.5º Protoype NV 85-X - untipped at 44.5" with a GPTV grip (logo down on shaft and grip) - D4 +/- SW (head weighs around 204-205g) * Cleveland 588 TSC 47º PW - all stock Cleveland * Aldila NV 55-S - tipped approx. 1.5" * Grafalloy Blue - tipped approx. 1.5" Let me know if you have a TP you are looking to unload to pay for your R7 or whatever driver you have your sights on. Email me directly at [email protected] with offers or questions. I can get pictures of my clubs this weekend if needed. Ebay ID is DCI86 if you need references. Thanks, Bill

Anybody have a Cleveland Launcher Ti 13º or 15º?? Would prefer a 13º head only as I plan on using an NV 85-X in it, but shafted heads would also be considered. Post here or email me directly at [email protected] . Thanks, Bill

Scratch 48º... would you have any pictures of the head?? I need a PW with a slightly wider sole than the 588 TSC 47º that I have been playing or the Vokey 48º that I played previously. Any way you can compare the soles to the Scratch?? Email me at [email protected] . Thanks, Bill