l8braker

Yes please keep us posted on the MCI's. I still love the Steelfibers but I'm intrigued by the MCI's as well as the new Accra Hybrex. Thanks.

Any more feedback on the MCI iron shafts? Currently have Steelfibers and tried Recoils. Recoils were good but I still prefer the feel of the Steelfibers - especially at impact. Recoils felt too muted (as most graphite iron shafts do) at impact whereas the Steelfibers still gave me some of the good vibrations/feedback/soft feel from my AF-302's.

I was at my local shop today and a junior golfer came in with an all Matrix set-up - driver, FW's, hybrid, irons and wedges all with Matrix graphite shafts. The blades and hybrids looked really nice. I didn't care for the look of the driver, FW's or wedges. Anyhow, I was in a rush so I didn't have a chance to chat with him. Does anyone know anything about Matrix clubs? I'm sure they are pricey (based on their graphite shafts) but I've never seen Matrix clubs before.

Let me know if anyone has one. Thanks.

Does anyone know when Epon plans to replace the AF502 and/or AF302? I'm saving up for a combo set and am pretty close to reaching my goal.

Let me know if you have one of these. Email is [email protected]. Thank.

Although I've always wanted to get JDM irons, I've always been wary of the look of the short irons - typically too boxy and/or round for me. I've decided on either the AF302 or AF502 but before I do, I would like to see how the irons look (especially 8-PW). I would appreciate if anyone can post pics of these irons from the address position as well as the sole. It would be great if you're able to do a side by side with some US irons like Titleist AP2 or Miz MP irons to give me a better perspective. Thanks for your help.

Let me know if you have a Nike T100 hybrid in 20* or 23* that you'd like to sell Shaft doesn't matter. Thanks, Dan

Looking for Diamana Whiteboard in 73 stiff in Ion plated for a 3w. Don't have the budget for a new one so good pull would be great. Thanks.

MCSub, Will you provide any feedback on the I65? Is it made for hitters or swingers? Does it have a super low ballflight? How does it feel? I just bought a pull-out from my clubmaker for cheap but not sure what to put it in. I currently play a 10* driver so I may try the I65 in a 12* and see what happens - figure higher loft to cut sidespin and the shaft will help flatten the flight a bit. Thanks.

What swingweight did your TM's come out at? Did you have to add any tip weight or lead tape? I am hoping to get to a D4 swingweight. I'm surprised that the Nippons feel stiffer than S300s. Curious as to what your 5iron swingspeed is. I really like the feel of both but need some shock absorption to help with my tendonitis. Thanks for the feedback.

I was wondering if the Nippon shafts butt frequency similar to a DG or Rifle. I've read that some of the frequency #'s have them at about senior flex - I know these play soft but didn't think they flexed that soft. Would the soft tip of the Nippons skew the butt frequency #s? I want to experiment with the Nippons and am going to pull some from a set of Titleist 804s w/ the stock Nippon 970 stiffs. Does anyone know if these play true to flex (even if the butt frequency is low)? Thanks.

I've got a couple of the new Cally Fusion driver headcovers (orange and black ones that Phil's sporting around). These are new and have no wear on them. Lemme know if you're interested. Thanks.

2 Callaway Heavenwoods still in the plastic wrap - 2h/17* and 3h/20* both with stock Firm graphite shaft with headcover. $130 each shipped to lower 48. TM Rescue TP 19* with stock Fuji Vista Pro 90 stiff (TP graphics). It's only been hit indoors about 20 times and has no scratches or skymarks. Easily a 9.8/10. TP headcover included. $200 shipped to lower 48.

Callaway BB454 8* with an Accra SC75 M4 installed by the Tour Van. It has only been played during one practice round. This head does not have any serial numbers on it. Thanks.