bigkidneys

I had a tour R7 8.5* and a Retail R7 9.5*. Both are tingy and nothing like the R510 TP. However, they are loudest when the 10gm weight are in the back and when you set up both for a fade, draw, or lower ballflight, the sound is not as loud but still tingy. You can't even foam the heads to get that sound as the stuff would fall out the holes when you unscrew a cartridge :laugh: The big difference is the square face angle on the tour. I just does not make sense to me to make a club that allows you to adjust your flight with a closed face! You would think that they would include 14 gr weight to allow more of a fade. When i set mine up for a fade with the retail, I get a straight ball. However, drawing the ball is much easier with both clubs. However, I think i will try and pickup a tour R510 Tp 10.5* if I could ever find one or get a retail and have the head foamed. Just my 2 cents! Jason

I am looking to purchase a retail or tour 10.5* R510 TP head. Must be 10.5* in excellent condition. Thanks. Jason

Price drop on all items! Jason

I have the following for sale: Very Nice Cleveland 460 Tour 9.5* in Fujikura Tour Release 27.3 stiff. I have pics. Club is a solid 9 out of 10. It differs from retail as it is not as deep faced, longer from heel to toe, and very solid! I have pics. $425 shipped in Conus. I also have a brand new Never Compromise Tour Only centershaft Voodoo Daddy putter. It has the center shaft mild offset bend. It was made for jerry kelly and is brand new with HC. $450 shipped in Conus. I also have a Cleveland Tour proto 900 60MB rtg wedge. Pics as well. $75 shipped in conus. Thanks. Jason

This club is practically new! Hit a small bucket of balls with the face taped so there are no marks. Club plays 45' with the shaft CPMs at 256. Comes with HC, weights, wrench, pouch and dial. Everything is there, just hit this too high and will be going with a 9.5*. I will not seperate the head and shaft so this goes as one piece! $550 shipped in conus by paypal. The shaft alone is worth $150-$200. Thanks. Jason

Looking for one of these in excellent condition. Prefr just the head but will accept full clubs in price is decent. jason

Can someone PM me with the cost of having that done? Jason

Subject says everything. I want one of these to compare to my R7. I have a like new retail cleveland launcher 400 10.5* with aldila NV-65 regular that plays firm to throw in as a trade. Thanks. Jason

Still available for those interested parties. I have better pics as well and may entertain partial trades for TM tour 10.5* heads. Jason

I have a practically new only hit 6 balls R7 Tour 8.5* driver with a YS-6 X-stiff shaft. Club comes with (3) 2 gm weights and (3) 10 gm weights, HC, wrench, and ball flight pattern. It has a T serial # as well. $1700 shipped insured by paypal only in conus. I have pics for those interested parties. SErious inquiries only please. Thanks again. jason

Not much to say except an easy 9 out of 10. No idiot marks or marks on crown. Just normal face wear from 1 season. $215 shipped in conus. Thanks. Comes with HC. Jason

Head sold! Thnaks mosesgolf. Jason

Numerous offers for $180 shipped by paypal taken but none have paid. First to send $180 by paypal to [email protected] will have the head before friday in conus. Cheap price for a tour head! Jason

Looking for one of these either total club or head only. Really need a 10.5* head so please no pushing of any 9.5* heads. I am trying to get rid of a 9.5* R580 tour head because I hit it too low. Thanks. Jason

I have a nice Taylormade R580 Tour 9.5* driver with a Fuji Tour spec 652 stiff shaft. Not sure of the head weight on the head but it is very solid! Just not enough loft for me. Was going to sell the head alone and keep the shaft but will sell the club outright for $410 shipped in conus. I also have a retail Cleveland launcher 400 10.5* with an aldila NV-65 regulat that flexs out to 255 CPMs. This is an awesome driver an hits it longer than the TM tour I am also selling. Just decided to pick up an R7 instead. $210 shipped in conus for this one. I have pics of the TM head as there are 2 paint chips on the bottom of teh club not noticeable at address. No pics of the launcher needed as it is easy 9 out of 10 with only moderate face wear. Paypal only. Thanks. Jason

I have a TM R580 9.5* tour head that sits square with no serial #. This is a very solid driver, just not enough loft for me. Head is a 9 out of 10 with a small paint chip off the back of the head which is not seen at address. Will sell outright for $200 shipped by paypal in conus or trade towards a R510 TP head with 10.5* of loft. Can provide pics if interested. It has the rails on the head. Jason

I was also under the impression the 757 was tip stiff? I knew it had a high kickpoint. One thing I have learned is not to be afraid of X flex shafts in TM clubs. Almost all are untipped and play like a stiff. When I first came on here and another website, I thought My God, everyone here swings Rebar except me 8O Only to find out later that half of them are untipped TMs and play like a stiff. Guess thats why I take all my clubs to be done by a master club maker :lol: Jason

I have both an aldila nv 65 in my launcher 400 and a NP-99 with an aldila nv 65 in the same flex. The folks at sonartec tip the shafts as suggested by aldila unlike Taylormade who do not tip their shafts. Both clubs have same feel and boring trajectory given their different lofts. To be honest, the only difference I see in these shafts compared to others is they have a tighter feel during the swing and offer a more boring trajectory with less ballooning. Other than that, the same as any old shaft. I have an identical SS as yours and play a regular flex. If tipped properly, they play pretty firm. Both mine cycle between 250-255. Hope this helps. Jason

Stock S300 shafts in these.

I have a like new Taylormade Smoothie 17* 4 wood with a Fujikura Vista pro 70 stiff shaft. Club has been hit for 1 round. No sky marks, just some face wear from hitting the ball. Club feels too light for me. Looking for another tour 17* or possibly 15*. Will sell outright to best offer until midnight EST on thursday.

Both wedges have been used maybe 8 rounds. However, they have a Dremel finish meaning they have a brushed satin finish to them. Grooves are practically new. Just finish has a brusehed look to them. $100 shipped for both via paypal to Conus. Jason

Maybe I am not getting the point of this post but will the plugs for the TP version fit the standard model? I would assume they would. Jason

Final price drop of $150 shipped in conus. Otherwise, off to ebay!

Price drop, $170 shipped paypal in conus.

The TP version is the only one that has a 7.5*. The regular R7 will not have a 7.5*. I believe that is what they meant. :)