bigkidneys

I have played this club for 2 rounds and must sell due to some unforeseen expenditures coming within the next month. Head is in outstanding condition with a couple of scratches undreneath the toe where it says titanium, not really worth mentioning but figured I would. It is fit with a stiff 27.3 fuji tour release untipped that cpms at 235. SW is D4. Looking for $500 shipped by paypal in conus or will accept a money order. Interested in cash only. Thanks. jason

So, tip trim about 1.5 inches as it is currently untipped, and then put an extension of say 1 inch in the butt end to take the total driver length to 44.5 and hopefully have a cpm of around 250? I just can't understand why if you buy a stiff slex fuji and not tip trim as they recommend, how it will not play as a stiff? It seems to me regardless of what shaft, you will probably have to tip trim it in order to get it to play at true flex. Does this sound right or am I just an idiot :laugh: Jason

Thats what I needed. Now I just need to find out how much to tip and trim to get the CPMs up to 250.

I just had a TM R580 XD Tour 9.5* shafted with an untipped Fuji Tour Release 27.3 stiff. It plays at 45' and CPMs at 235 (w00t) I like to feel my shaft kick as I have somewhat of a smooth swing. However, My ball starts out straight and generally balloons high and to the right. I want to cut it down to 44.5 or possibly 44.25 and was wondering where should I trim from? The butt end or the tip end? I normally play my drivers around 250 cpms. I did have a cleveland launcher 400 shafted with a regular NV-65 that freqd at 235 but the launch pattern and dispersion was dead straight to a slight cut. Nothing this bad :crazy: Any help would be greatly appreciated. my ss is between 105-110. Thanks. jason

I have a like new hit twice in a range session Cleveland Tour 400 9.5* driver with the KJ Choi Blue MFS 75 stiff shaft that freqs at 254cpms. This driver is dead square, tour serial # and comes with a tour only cleveland 400 hc with the cotton sleeve. the only reason iam selling this is because I just picked up and shafted a tour R580 XD and hit it much straighter as the shaft is a little tighter. Otherwise, I would keep it. I am looking for $325 shipped in conus by paypal. Thanks. Jason [email protected]

Never thought about that. What about placing a rubber seal into the port to act as a washer instead?

Love the SM 490A. How much do those run?

I am looking for one of these. I have a like new 34' cameron ss NP beach 340 gm head with some lead tape placed on bottom. Comes with official Masters suede green cover. Looking to sell outright for $165 shipped in conus or trade and pay $$ towards a red x putter. Looking for a heel shafted putter. Thanks.

Looking for one of these as well. Just need the head and must be in excellent condition. Thanks. jason

Looking for all of these but must be in excellent condition. I prefer heads only but will purchase entire club if the right shaft is in it. Thanks. Jason

I have a like new TM Tour Smoothie 17* 4 wood with a Rifle 6.0 shaft. I have pics and this is practically new. Just don't like the leading edge and how sharp it is. Would like to trade for another Tour 4 wood. Open to sonartecs NP-99, V-steel, 980fs. etc. Jason email me at [email protected] if you want pics.

I have a few tour items for trade or will pay cash for one of these drivers. Must be 10.5*. Jason

Price dropped! Last time...

8.5* Tour SOLD! Thanks. 9.5* Tour still available!

Price drop! Will consider partial trade and cash for a TM Tour 10.5* head or head and shaft combo. Firm on price of $1500 shipped in conus for either club.

Sold to my Good Friend jamie! And no, I won't make you wait 6 months to get it :wink: Jason

You are absolutely right! We had no business over there and personally I think that it was motivated by Daddy not doing the job right the first time! I think we should just let everyone fight their own battles except for those countries closest to us (ie Britain, Australia, Japan, etc) who have been with us in the past. All the others should just fend for themselves. If they ask for help, than we'll give it. Otherwise, I am sick and tired of being called an "Occupying Force"! We have enough oil reserves in Texas and the Gulf Of Mexico , that we don't need the damn oil over there anyway! Hell, who wants to occupy a big Sand Box! And that is truly all it is! Benn there and Afghanistan and absolutely have nothing good to say about either. We have our own (ie. Pensacola, St. Pete). But as usual, we got ourselves in there like Vietnam and now Bush wants to save face and not deal with it until after the election. Hopefully then, he can own up and bring our brothers and sisters back.

In my last post I forgot to say that the military owes alot to your father and those that served during WWI, WWII, Korea and Vietnam. We learn from our achievements and mistakes and they no doubt have helped make the military what it is today. The WWII Memorial has been long overdue and I plan on seing it before I head out as DC is only 6 hours from here. PM me and maybe we can get together if I come up that way for a round. It would give my wife a chance to spend time with here father before we head out. jason

I spent 3 years in the DC area (Bethesda) to be exact. Absolutely loved the area. So much to do! Was not into golf at the time though. Probably glad too as I am sure the cost of Greens fees are pretty stout! Was up there last year to see some of my wife's family who lives in Annapolis. Saw a play at the Kennedy Center and walked around the mall for a bit. When I am there, it is like the most beautiful place in the world! I am a history buff and the nostalgia there is unremarkable. Will probably end back up there some time in the future for a few years. Jason

I have this last Tour R7 left. If no takers, off to ebay! R7 Tour 9.5* 45' aldila 105 x-stiff proto shaft Comes with HC, 2 2gm weights and 2 10gm weights installed. No wrench included. $1300 shipped in conus!

Price drop $325 shipped in conus!

Jaster and Jamie, Chances are I will be there for sure around March for about a week. My wife has plans to diver the GBR. Always wanted to get out there and it looks like it will finally happen. As a matter of fact, we are training at the moment here with some Brits and Aussies. They are all artillery units and getting ready to head to Afghanistan. Feel bad for them every day I see them coming in from the field all hot and soaked in sweat. I will talk to you guys soon to get a perspective on what we should do while we are there. Jason

This is a like new retail R7 9.5* with weights and wrench with stock stiff shaft. Just can't deal with the closed face and will wait for the TP version. It has 2 paint chips on the top of the crown line but not noticeable really at address. I plan on getting another R510 TP and use it until the TP R7 comes out. Everything come with this club for $375 shipped in conus by paypal. I can take pics tomorrow to show the chips. Not bad, just figured I would mention it as they were not mentioned to me and I don't do business like that. Thanks. jason

I don't mean to stray from this post but feel obligated to speak some more. Isn't it ironic that they killed the son of a bitch and his goons as they were disposing of the body? One of the articles I read tonight stated that as soon as they saw the website and photos, they stormed down into a neighborhood that they expected this guy to be at, caught him disposing of the body, and killed them right there! I mean, hell, I am glad someone killed these guys but if they knew where they lived, why did they not go sooner? Its like they were waiting to see if these guys follow through with it! And something else bothers me as well. If they can do it to our guys, why not do it to them? Sometimes you have to fight terror with terror. These guys are so fanatical about their beliefs and what they have to do to achieve martyrdom, why not catch these bastards, hang them with rope, stuff pork down their throats, and then behead them as well. I am sure if they see that we are willing to do the same damn things to them, they may think twice. This is one of the reasons why crime is so bad here in the states. The punishment is nothing like it should be. let's start adopting practices like the do in India. At least for the sex offenders! Personally though, both sides here are losing innocent people every day. Why not hit them with a MOAB, showing that if people want to call us a bully, then dammit, lets show them what we can do! I bet if we don't get their attention, at least we have a better chance of taking out half of the ones we need to. No matter what we do or say, they do not want us there and think we are the "Infidels"! i am so damn sick of hearing that word! I have never stereotyped or been racist in my life but damn it is getting harder everyday for me when I see friends go down and all these assholes have to say is "Down with America, and Get out!" Lets leave them like they are and see what they can do! I am sure Sally Struthers can strut her fat ass in there and help those damn kids. I would rather help by phone than get my ass blown off delievering rice to a mud hut! I am sorry if I offend anyone here but I am getting so damn sick of this crap and am glad to be taking a 2 year vacation from being pulled to quote "Fight for our Freedom" as GW likes to say. No offense to anyone here who have served in the past but I do not believe we have ever fought for our own freedom except for The American Revolution. That is not saying that we have not "Fought for other peoples' freedom". Which is exactly what we have done. Thanks for the kind words about our serving. However, it has always been like a job for me until 9/11. After that, it became more personal for myself and my family. I would not think twice about getting back out. I do have to say though that after 10 solid years of serving off and on, I get tears in my eyes hearing the Star Spangled Banner and knowing how much better we have it here than most anywhere else. Thanks and God Bless you all!

Jamie, Glad to hear everything came off smooth. Kudos to Scott for taking care of business on his end. Sad to hear about his business, but such is life :sad: On a brighter note, I will be moving to Guam in August and my wife has already decided That Australia will be our first vacation destination sometime around Feb or March 2005. You bet your ass if I am Down Under I will give you a holler. I have always wanted to go there but my work obligations have kept me on the East Coast and all over that Sandbox we call the Middle east :-) With everything that happened today over there, I would love to go back, kick some more ass and get paid the Extra $$ for it :laugh: With all that off my chest, :money: Heres to you getting your money back and turning that sand box into the largest glass factory the world has ever seen :-) Jason