MHLY99

Dont really want to split, Lower price $230 for all, super deal.

I play my driver at 44" did not lose any distance. I had to add 6 2" strips of lead tape to bring the SW up to D4 where I like it.

Bump, price lowered to 250, want to move. Thanks.

I have a set of Epon Technity wedges in 51, 56, and 60. The 52 was bent to 51 and the 58 to 56. They have been played one round and two range sessions. They are black with a slight custom grind to kill the leading edge some and a little heel and toe relief on the 56, and 60. They have S300 in them, 35.25" for the 51 and 35" for the 56, and 60. The lie angles are 61' each. They have new TSG cord grips on them. Bought these recently from TSG to try but the grind does not work for me. Asking $265 shipped and pp for all three. Email is [email protected]

I changed my bag recently and went to the following: Club Shaft Loft Length Yardage Driver FT5 Xcon6 9.5 44 265-280 4 Wd Adams 505 F7M2 16 42 235-250 Hyb Adams Pro Infra 20 39.5 215-230 Hyb Adams Pro Infra 23 38.5 200-215 5i R7 Forged S400 26 37.5 185-200 6i R7 Forged S400 31 37 170-185 7i R7 Forged S400 35 36.5 160-170 8i R7 Forged S400 39 36 150-160 9i R7 Forged S400 43 35.5 140-150 pw R7 Forged S400 48 35.25 125-140 gap Epon Tech S300 51 35 115-125 sand Epon Tech S300 56 35 100-115 lob Epon Tech S300 59 34.75 85-100 I find that I use wedges and short irons a lot more than long clubs. My stats, 6 hc, 5'7, 106-110 SS

I love mine. I am looking for a set as a backup.

I sent in an essay but did not get any confirmation reply. Did you get it? Thanks.

This may help

How does everyone think the Technity wedges compare? Everyone seems to think they spin alot but feel and grind?

Dam, would have probably bought all of them from you too!!

These look great, I am looking for new wedges. Considering Scratch, Fourteen, Gauge, etc. Hard to decide. When will these be available or custom order only right now? Thanks

They felt very light to me as well when compared to my X tours. I added 3 pieces of lead tape to each. I have some S400 shafts I think I am going to put in but am hitting them so good I am afraid to change.

I purchased some R7 forged with S200 from another forum after suggestions by friends. At first I felt they were light as I played X tours with S300. Added alittle lead tape and off we went. They are great irons. Remind me alot of the 300's except more forgiving. The sole grind is great, my biggest problem with the X tours. The glide right through the turf and do not dig. I had my best iron striking day on Sunday with them. The feel is very solid and soft, not as soft as some miuras or as clicky as some endos, in between. Want to try some other shafts but afraid to as I was swinging them so well. This is a great iron with good feel and foregiveness, playability, and great sole. Gonna hit them next to some 32's this weekend. I will be playing them for a while until something interesting comes up in the BST of course...LOL

Looking for an Eldik M and some player CB forged irons. Email is [email protected] Thanks

I have a Matrix Code 6 shaft in strong flex for sale. It measures 44 1/4" long, with a 1 5/8" tip prep. Plenty for a 45" in most drivers. It was professional installed and pulled. There is no grip on it. It is a very tight shaft, just to low launching and to low spin for me. Plays very strong. About 3 rounds on the shaft. Asking $275 shipped and paypal. email and paypal is [email protected]

The A2Pro with Ozik is SOLD. Thanks man The other A2pro is the same. If someone is interested, I could get an Ozik Altus and install it and let it go for the same as the other one. Not many have hit this hybrid, but its the most solid, longest one out there compared to the Rescue tour, Genex tour, I have hit. Very much a players hybrid. People need to hit this 3 wood too. Those of us that have know. They are about as long and straight as you can get. Surprised not more people want these, it is better than the Tour V steel, Tour Sonartec, and Adams 2080 and 4060 I have hit.

Got more stuff to sell. Here is an updated list from what I had before plus some new things I tried and have decided to move. All prices are shipped and paypaled. I have more pics if needed. Email and paypal is [email protected] Thanks 1) Tour issue Tour Exotic 3 wood. 13” loft. Headweight is 209.4g. 43” Shafted with a Accra T70 M4, Dual Durometer grip. Super long 3 wood and straight. Selling because it is too long for me if you can believe that. 9/10 $250 2) Tour issue Adams A2Pro hybrid. This is the new one with the weight port on the bottom, hard to find. 18’ loft. 40” long. Shafted with a Icon HL stiff, Dual Durometer grip. Selling because it is to long gap between it and my 4 iron. 8.5/10 because of a slight scratch from a rock, pictures show it, can barely see it. $300 3) Tour issue Adams A2Pro hybrid, newest version with PRO written on the bottom. I don’t think anyone has seen this one yet, I just got it and hit it a few times. It is super rare and not released to many. Has a slightly wider bottom when compared to the one without the pro I have listed in number 2. This is the new one with the weight port on the bottom, 18’ loft. 40” long. Shafted with a Matrix OZIK Altus in strong. Great club, I just hit it to far again and went with the 20’ Almost brand new, 9.5/10 $425 4) Tour issue TM SS Box groove wedges with swirl marks on face. Rifle spinner shafts. Grip rite cord grips. The 58 has a scratch on the tow 8/10 $200 for the set 5) Tour issue TM LT2 irons, heads only, 3-PW. These have a serial number on the 5 iron head but came from a rep from a popular shaft company. They are taper tips and use regular ferrules, not the snap ones like retail indicating they are tour. Also insertion depth is 1 ¼” unlike the retail 5/8” Almost perfect shape. 9.5/10 Very hard to come by Asking $550 for the heads. 6) Tour issue Cleveland CG10 46’ wedge. Satin finish. Deep grooves. S400 shaft. 2 dot. 9/10 barelys used. $80 7) Titleist 975D driver, old school. 8.5” loft. Shafted with a Fuji 652 Tourspec stiff, 44.5” long, Lamkin ¼ cord grip. 9/10 $125, the shaft is worth more than that 8) Fuji 904HB hybrid shaft. Stiff flex. 37.5” long. Been tipped 1”. Lamkin crossline grip. Never got around to install. $80

Sent a PM

R510DF sold Balde sold 904HB 39" sold Ovation sold pending payment Make me some offers, would like to move the stuff. You guys do you know what you are missing with this driver and 3 wood. Not many people have hit the driver. Beats all I have tried, R5, R7, R510TP, Launcher comp, 905. Thinking about keeping now as I changed balls and hitting it better.

Decided to sell a bunch of things, cleaning up closet and making equipment changes. All prices are shipped and paypaled. I have more pics if needed. Email and paypal is [email protected] Thanks 1) Tour issue Tour Exotic Driver, very rare. 8’ loft, 45” Shafted with a Ozik Tp-7 Strong, corded crossline grip. Head weight was 198g. Super long and straight, much longer than my Comp 460 and R510TP. Everyone raves of this driver, so straight with the Ozik. I love the driver and getting another one. Selling because I need to go up in loft to a 9’. 9/10 $675 basically getting the head free! 2) Tour issue Tour Exotic 3 wood. 13” loft. Headweight is 209.4g. 43” Shafted with a Accra T70 M4, Dual Durometer grip. Super long 3 wood and straight. Selling because its too long for me if you can believe that. 9/10 $300 3) Tour issue Adams A2Pro hybrid. This is the new one with the weight port on the bottom, hard to find. 18’ loft. 40” long. Shafted with a Icon HL stiff, Dual Durometer grip. Selling because it is to long gap between it and my 4 iron. 8.5/10 because of a slight scratch from a rock, pictures show it, can barely see it. $325 4) Tour issue Adams 2080 Ovation 13’ loft. 42.5” long. Shafted with a Fuji Pro 95 stiff. Lamkin cord grip. Solid and great feeling 3 wood, probably the most solid I have hit. 9/10 only used a few rounds. SOLD PENDING PAYMENT 5) Tour issue TM SS Box groove wedges with swirl marks on face. Rifle spinner shafts. Grip rite cord grips. The 58 has a scratch on the tow from sand where you are not suppose to hit it  8/10 $225 for the set 6) Tour issue Cleveland CG10 46’ wedge. Satin finish. Deep grooves. S400 shaft. 2 dot. 9/10 barelys used. $80 7) Tour issue TM R510DF with Titanium on toe head. 9.5’ loft. Never got around to installing the shaft for it. In great shape except for some paintfill gone on the bottom. Perfect face. Everyone knows this is one of the hottest and most solid heads ever built. 8.5/10 SOLD 8) Sonartec MD hybrid 19’ loft built by Chip Usher. Nippon 950 stiff shaft, 40” long. Lamkin ¼ cord grip. 9/10 $80 9) Royal Collection TD hybrid 23” loft. Same head design as the Sonartec MD. Nippon 950 stiff shaft. 39” long. Lamkin ¼ grip. Great set up with the Sonartec. 9/10 $125 10) Gauge Design Balde putter. Very similar to the Cameron Newport. Solid feeling with a cool black chrome finish. 34” with the 130g Nippon putter shaft and standard grip. 9.5/10 only used a few rounds. SOLD 11) Titleist 975D driver, old school. 8.5” loft. Shafted with a Fuji 652 Tourspec stiff, 44.5” long, Lamkin ¼ cord grip. 9/10 $150 Have some shafts for sale as well: 12) Fuji 660TR X flex 43 ¼” long. Plays to 45 in driver. 1 ¼” prep, No grip. I bought it to install in the R510DF but never got around to it. $150 13) Fuji 904HB hybrid shaft. Stiff flex. 39” long. Lamkin cord grip. Never got around to install it. SOLD 14) Fuji 904HB hybrid shaft. Stiff flex. 37.5” long. Been tipped 1”. Lamkin crossline grip. Never got around to install. $80

Sent PM on a Balde