pingwrx

Question between the US version and Japanese version Fuji Zcom shafts. What is the Japanese parallel tip length compared to the US version? I undertand the US version has an extra 2" tip length, hence making the overall raw length of the shaft 48" vs the Japan shaft @ 46". And I unerstand that the US Zcom parallel tip section is 4.5" Does this mean that the Japanese version tip length is only 2.5" Can anybody confirm this? Thanks in advance.

I'm looking for a Fuji Zcom MW54 Stiff flex, US version (that's 48" raw length) Please email me with price including shipping to 97701 US zip code. Thanks.

Price lowered to $200 for both wedges!

I have two Sonartec Prototype wedges. One is a 56* with 12* bounce stamped 24/50 and the other is 60* with 7* of bounce stamped 3/50. The length of 56* is 35-1/4" at D-6 swingweight and the length of 60* is 35-1/8" at D-6.5 Swingweight. Both have DGS300 shafts. These have very versatile grinds, works well in any lie. These also have difffernet bounce angles from the retail versions which are to come out later this year. I believe the retail version have higher bounce angles. These are truly unique and very nice wedges. I have almost $380 invested in these. I will sell them both for $200 shipped to cont. US and paypal'd I'm opened to trade offers, especially Cameron Newport 2 gun Blue or oil can putters. For larger image you can click here: http://www.infopak.com/ebay/sonartec.jpg Thanks for looking.

No 15*? PM sent

Hello Chris, Do you have any of the GFT for sale? I didn't see any in your Pro Shop, nor at your eBay store.

So to clarify, are you saying these 3 are equally square or is the GFT most square then X-ST then BBD H2? Also I use to have a BBD Type H 15 degree, I thought this was a bit closed face, is the BBD H2 different? THanks

Hello. I'm looking to purchase one of these 3 woods, can anybody give me their opinions on these 3? The most important factor for me is that the fairway wood needs to sit square to open. Does any of these fit the bill? Thanks in advance.

I was told they're the same, except because of the Ion plating they weigh a few grams heavier. I have an Ion 63 and US version 73 and they seem to perform in similar way....very nicely.

Please PM me with price including shipping to Oregon. Thank you.

I have a Fujikura Vista Pro 80 X flex that was pulled from Taylor Made V Steel Tour (using Kennedy puller and heat gun). Its in excellent shape, 41.75", not sure on the tipping. $25 shipped and paypal. For picture and additional info click here http://www.infopak.com/shafts.html Thanks

I'm interested in the Aldila NV 65 S, has this been tipped? And also is this .335 tip size? What condition is it in? Thanks

I have the following Fujikura golf shafts for sale, all are in EXCELLENT condition, click here for list and pics: http://www.infopak.com/shafts1.html You may email me with questions, [email protected] Thanks for looking

I would like to purchase a Fujikura speeder 652 either TourSpec or regular version, in Stiff Flex. If its a pullout it needs to be at least 43.25" with no tipping. Please email me price including shipping to Oregon, [email protected] thanks

I have a BBD type H 15 degree, if you're interested in a 15 degree model.

I have a BBD type H 15 degree, if you're interested in a 15 degree model.

I have many pull out shafts for sale, click here for list and pics: http://www.infopak.com/shafts.html You may email me with questions, [email protected] Thanks for looking :smile1:

Gone to eBay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...=ADME:B:LC:US:1 Thanks

I have for sale a Cleveland Lanucher 400 Tour 9.5* that's been refinished in Mirror Black by Custom Club Coatings. The finish looks like a R510 TP. This is the Tour version with Tour serial numbers. It is shafted with a Penley ETA Tour Stiff Flex. The shaft and the the grip is NEW, the head has only been a few times since its been refinished. The length of the club is 45" Swing weight around D-2. Here is the link to the pics: http://www.infopak.com/ebay/launcher.jpg You may also check my eBay feedbacks: http://cgi2.ebay.com/aw-cgi/eBayISA...k&userid=hspaik The price is $385 shipped and paypaled, only trade would be for a R510 TP 10.5 Stiff. Please email me if interested [email protected] Thanks

Brand/Flex/Tip Size/Length/Comment/Price Aldila NVS ....SOLD Aldila NV (green) 65/X Flex/.335/42.75"/ From Callaway Fusion Tour Driver prep area approx. 1".....SOLD Graphite Design YS-7/TX Flex/.350/43.63"/From Cleveland Launcher Tour Driver, prep area approx. 1".....$18 All of these shafts are in excellent condition, all of them have been pulled using a Kennedy puller with heat gun at low heat (NO PROPANE TORCH WAS USED). Please email with questions: [email protected]. Add $5.00, for shipping. Paypal OK. You can check my eBay feedback: ]http://cgi2.ebay.com/aw-cgi/eBayISAPI.dll?...erid=hspaik[/i]

I am looking for cavity backs... MR23, Z101, 202, 201 etc.

I currently play the Cobra Forged SS irons, the best set of irons I've found (for me, so far) excellent feel, very forgiving, workable, and sets up nicely. My current handicap goes from +1 to 1.4 (currently 1.1) my 5 iron swing speed is 89mph and driver is 101-104. My Cobra Forged are starting wear a bit, and I want to purchase a new set. I heard a lot of good things about the Tourstage irons and want to give them a try. My question is which Bridgestone Tourstage model is the closest to the Cobra forged SS? I want a set that's just as forgiving as the Cobra Forged (I just don't play enough...I need the forgiveness). Any feedback would greatly be appreciated. :wink:

I have a R510 driver that's been bent open by the tour van and I would like to bend it back square. Can anybody out ther do this? Or know of anybody who can do this? Thanks in advance.

What's the swing weight at 44.5"? Does it sit square or open? Thanks

Do you know what the "4" stands for?