Spoon Posted August 11, 2011 Report Share Posted August 11, 2011 Im a sucker for authentic tour only gear and this one is as tour as you can get. supposedly belonging to adams staffer Ryan moore who is also a ozik user. anyway these are tour van customs protos of the retail white program 130 iron shafts. after having a long chat and go signal from divot dr goodsie i pulled the trigger. will game these mid september. from the markings they are very very stiff xx with a freq of 6.5 but goodsie thinks i can handle them based on what i play. dispersion will be sick and will bury my modus 3. Here are the label markings label reads as follows: ZTIXX 6.5 / VER 9.0 3 - 313CPM 4 - 317CPM 5 - 321CPM 6 - 325CPM 7 - 329CPM 8 - 333CPM 9 - 337CPM PW - 341CPM i tel you it never ever ends........... Quote Link to comment Share on other sites More sharing options...
Eca Posted August 11, 2011 Report Share Posted August 11, 2011 Holy smokes C! Which heads? Quote Link to comment Share on other sites More sharing options...
Spoon Posted August 11, 2011 Author Report Share Posted August 11, 2011 Holy smokes C! Which heads? copper 302s. i dont like having more than 1 set of irons. Quote Link to comment Share on other sites More sharing options...
RIduffer Posted August 11, 2011 Report Share Posted August 11, 2011 Should be a beautiful thing. Welcome to the dark side of graphite iron shafts... Good luck, RIDuffer Quote Link to comment Share on other sites More sharing options...
Spoon Posted August 11, 2011 Author Report Share Posted August 11, 2011 Should be a beautiful thing. Welcome to the dark side of graphite iron shafts... Good luck, RIDuffer not there yet:) just worried these will be too stout. matrix'is notorious for being too stiff. what weight are your crazies? Quote Link to comment Share on other sites More sharing options...
bogeydog Posted August 11, 2011 Report Share Posted August 11, 2011 Super stiff, even the Matrix claims so. The torque ratings are astronomically low. Quote Link to comment Share on other sites More sharing options...
RIduffer Posted August 12, 2011 Report Share Posted August 12, 2011 not there yet:) just worried these will be too stout. matrix'is notorious for being too stiff. what weight are your crazies? 108g uncut. X Stiff CBI-02. I have to say I am very happy with the switch so far. Admittedly, it is taking some time to adjust the swing but better than steel, at least the ones I have played... Quote Link to comment Share on other sites More sharing options...
potuna Posted August 27, 2011 Report Share Posted August 27, 2011 You must be doing extra push ups. Quote Link to comment Share on other sites More sharing options...
Spoon Posted September 13, 2011 Author Report Share Posted September 13, 2011 the shafts are so exotic looking. the individual shafts feel heavier than my modus shafts. they feel heavier than steel. debating if i will shaft these sick pups! Quote Link to comment Share on other sites More sharing options...
Mjr. D Posted September 13, 2011 Report Share Posted September 13, 2011 I have them in Epon 302s. HIGH launch and they do spin a lot in the wind.... i'm a hard steep swinger though. Dispersion seems very good. Great feel. Nice looking. No vibrations at all. I didn't like the wedge shafts though. Oddly enough, no spin. I pulled them and put in DG spinners. Definitely notice an increase. I used to have Nippon wedge shafts in Epon wedges and they spun like mad, too. Quote Link to comment Share on other sites More sharing options...
supo Posted September 13, 2011 Report Share Posted September 13, 2011 ahhhh... mustnt bite.... have to resist.. got to be ...... .storng...... carlo????????????? Quote Link to comment Share on other sites More sharing options...
Spoon Posted September 13, 2011 Author Report Share Posted September 13, 2011 I have them in Epon 302s. HIGH launch and they do spin a lot in the wind.... i'm a hard steep swinger though. Dispersion seems very good. Great feel. Nice looking. No vibrations at all. I didn't like the wedge shafts though. Oddly enough, no spin. I pulled them and put in DG spinners. Definitely notice an increase. I used to have Nippon wedge shafts in Epon wedges and they spun like mad, too. how would these compare in stiffness to DGS300 or even nippon modus 3 stiff? these are about the flex i am looking for. weight not an issue. i am actually very very happy with my dg spinners in my 52/58 combo. not touching those. @ stew whats up? gary mentioned that these graphites would destroy the nippon steels in feel and performance, he swears by the ozik program 130 shafts. dont know where to put these in as theres nothing wrong w the modus3s Quote Link to comment Share on other sites More sharing options...
supo Posted September 13, 2011 Report Share Posted September 13, 2011 i can think of a place... my yamaha tours! Quote Link to comment Share on other sites More sharing options...
skippercarey Posted September 13, 2011 Report Share Posted September 13, 2011 I think the matrix make the best looking shafts available IMO......, not to shabby on performance to especially the high end ones Quote Link to comment Share on other sites More sharing options...
Spoon Posted September 13, 2011 Author Report Share Posted September 13, 2011 i can think of a place... my yamaha tours! haha, let me have a whack with them first. will test out the 3i on my 302 head. Quote Link to comment Share on other sites More sharing options...
ant Posted September 13, 2011 Report Share Posted September 13, 2011 they are definitely not XX, more like X, have a standard programs set from TSG here, 6.5 as well, similar CPMs if i recall correctly not that i care much about CPMs. anyways, dont worry they aint gonna be super stiff and boardy or anything like that, 1150s X i had before definitely felt stiffer than 6.5 programs. after having programs and also altus hybrid shaft i think i'm becoming one of those cuckoo matrix fans. they certainly know how to make super solid stable shafts that also feel alive. Im a sucker for authentic tour only gear and this one is as tour as you can get. supposedly belonging to adams staffer Ryan moore who is also a ozik user. anyway these are tour van customs protos of the retail white program 130 iron shafts. after having a long chat and go signal from divot dr goodsie i pulled the trigger. will game these mid september. from the markings they are very very stiff xx with a freq of 6.5 but goodsie thinks i can handle them based on what i play. dispersion will be sick and will bury my modus 3. Here are the label markings label reads as follows: ZTIXX 6.5 / VER 9.0 3 - 313CPM 4 - 317CPM 5 - 321CPM 6 - 325CPM 7 - 329CPM 8 - 333CPM 9 - 337CPM PW - 341CPM i tel you it never ever ends........... Quote Link to comment Share on other sites More sharing options...
Mjr. D Posted September 14, 2011 Report Share Posted September 14, 2011 how would these compare in stiffness to DGS300 or even nippon modus 3 stiff? these are about the flex i am looking for. weight not an issue. i am actually very very happy with my dg spinners in my 52/58 combo. not touching those. @ stew whats up? gary mentioned that these graphites would destroy the nippon steels in feel and performance, he swears by the ozik program 130 shafts. dont know where to put these in as theres nothing wrong w the modus3s They are stiffer than DG300's.... at least mine are but i have them in the stiffest profile. I haven't tried the modus 3.... heard they were crap from the Doc. Although some people seem happy with them. The feel is great - very smooth and soft. They don't destroy the nippon steels in performance..... i mean really, in this day and age, all shafts are going to be pretty good, it's just a matter of finding what you need for your game and what you like. I have Nippon SPB's in Miura 5003's and they perform excellently... lower launch, i think tighter dispersion and lower spin. Feel is obviously not as soft but we're comparing steel to graphite. They're all good! Quote Link to comment Share on other sites More sharing options...
Spoon Posted September 14, 2011 Author Report Share Posted September 14, 2011 They are stiffer than DG300's.... at least mine are but i have them in the stiffest profile. I haven't tried the modus 3.... heard they were crap from the Doc. Although some people seem happy with them. The feel is great - very smooth and soft. They don't destroy the nippon steels in performance..... i mean really, in this day and age, all shafts are going to be pretty good, it's just a matter of finding what you need for your game and what you like. I have Nippon SPB's in Miura 5003's and they perform excellently... lower launch, i think tighter dispersion and lower spin. Feel is obviously not as soft but we're comparing steel to graphite. They're all good! is your ozik graphite profile the same as mine? if they are im in trouble:) Quote Link to comment Share on other sites More sharing options...
Mjr. D Posted September 14, 2011 Report Share Posted September 14, 2011 I'm not actually sure... gocchin would know. I think they're XX but they could possibly be only X flex. Quote Link to comment Share on other sites More sharing options...
+TourSpecGolfer Posted September 15, 2011 Report Share Posted September 15, 2011 I played the 130's for many months just after release. As far as graphite goes they are among the stiffest. Accuracy was fantastic and while it feels a little boardy n stout to my game didn't suffer one bit from the switch to heavy graphite in irons. Quote Link to comment Share on other sites More sharing options...
Spoon Posted September 20, 2011 Author Report Share Posted September 20, 2011 shafted my 3iron head with the 3iron ozik. man shafts are super good looking. not so distracting once installed. the writings and matrix wordings are virtually invisible under the grip they feel extremely robust and feel heavier than steel. 4-pw install is on hold for now Quote Link to comment Share on other sites More sharing options...
Spoon Posted September 21, 2011 Author Report Share Posted September 21, 2011 wow hit the 3i today, was absolutely the stiffest thing ive ever felt in my life. much much stiffer than any steel shaft i have tried. stiffer than nspro proto x PX 6.0 etc etc. off to the Fs section what a shame Quote Link to comment Share on other sites More sharing options...
Mjr. D Posted September 21, 2011 Report Share Posted September 21, 2011 Sorry to hear that. I would have liked to have heard comparisons with the regular Program 130s and other shafts. How did you get your Epon 302's finished in that copper again? Quote Link to comment Share on other sites More sharing options...
Spoon Posted September 22, 2011 Author Report Share Posted September 22, 2011 Sorry to hear that. I would have liked to have heard comparisons with the regular Program 130s and other shafts. How did you get your Epon 302's finished in that copper again? i ordered it that way. its an upcharge that will take 2-3 weeks. worth the wait. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.