sbeaz Posted July 16, 2014 Report Share Posted July 16, 2014 (edited) TSG Friends and Neighbors, I've got stuff you may want, need or just generally have to have. Feel free to make offers. 1. SOLD jBEAM BM-535 driver. 10 degree, square face. It's in tremendous shape. Purchased from TSG. Slightest chip from a hit high on the face that went much farther than it should have. 2. TRADED S-Yard t.388 driver. 10.5 head pretty clean - face super clean, bottom scuffed. Purchased from fellow TSG'er. 3. SOLD Ryoma D-1 F5. 5 wood. It's high and straight. Club is in great shape, just a touch of wear on face. Purchased from TSG. 4. SOLD Onoff Labospec TS358 3 wood. 15 degrees of goodness. This fairway wood is in outstanding shape. Stock shaft SX, 70g KP: High. Sneaky good. Purchased from TSG'er 5. SOLD Egg HD Spoon. 14.5 degrees. 3 wood. Long and straight. Stock shaft M-43, D2 swingweight. Iomic grip. This is the one club out of this group I worry about letting go. Not kidding. Eggs wear well, but this club is still in outstanding shape. 6. SOLD Miura MG HB3. 20 degree hybrid. Miura feel. Club is in good shape. Tour AD DI-95s shaft. Surprisingly long. Has hand painted Miura ferrule. 7. SOLD Quadra Fire Express Prototype. 65SX. Shaft is tipped .75 inches. Plays deliciously stiff. This was my go to shaft. It's been replaced. It is a 2x pull purchased from TSG'er. 8. SOLD Quadra Fire Express TP-V 65X. Shaft plays with an active tip. Not tipped. If you need juuuust a little stiffer than stiff, this may be a good shaft for you. Purchased from TSG. Pulled once. 9. SOLD Diamana B 50X. Stop laughing. Light weight experiment that did not work. This shaft will be perfect for somebody. Pulled once. Seriously. Just once. 10. TRADED Yururi Tour 60. Love this club. Black head, black KBS tour wedge shaft, original Yururi grip built up to midsize. 11. SOLD Yururi Raw Gekku 61 wedge. LOVE this club. Dynamic Gold S200. Thought about naming a child after it, but the wife told me I was crazy and we're too old to have kids. Grooves are still pretty sharp. Long post, but it's time to clear a few things out. Prices generally do not include shipping as I'm not sure where you are. I can work with you on shipping and get this stuff to you as soon as possible. Thanks. Edited September 1, 2014 by sbeaz Link to comment Share on other sites More sharing options...
mpbachman Posted July 16, 2014 Report Share Posted July 16, 2014 Great gear and prices!!! Good seller here folks! GLWS! Link to comment Share on other sites More sharing options...
sbeaz Posted July 16, 2014 Author Report Share Posted July 16, 2014 That would be mpbachman... Link to comment Share on other sites More sharing options...
mpbachman Posted July 16, 2014 Report Share Posted July 16, 2014 Thanks man! Great gear you have there, you are going to love the Modart (and your future Modart purchases ;) Link to comment Share on other sites More sharing options...
winfoot Posted July 16, 2014 Report Share Posted July 16, 2014 Great seller (and buyer) here folks. Great gear at great prices. Should have known you would pick up that modart. Link to comment Share on other sites More sharing options...
Hutch Posted July 16, 2014 Report Share Posted July 16, 2014 Great gear here mate GLWS What modart gear did you get? Link to comment Share on other sites More sharing options...
sbeaz Posted July 16, 2014 Author Report Share Posted July 16, 2014 Hey Hutchy. Got the D driver. Hopefully, I'll get a chance to hit it today. Link to comment Share on other sites More sharing options...
SHWhite Posted July 16, 2014 Report Share Posted July 16, 2014 Nice sticks. What are the specs on the Epon shafts? Link to comment Share on other sites More sharing options...
sbeaz Posted July 16, 2014 Author Report Share Posted July 16, 2014 Here are the specs for SPB and the 5 iron is a standard 38 inches http://www.nipponshaft.co.jp/english/steel/sp.htm Link to comment Share on other sites More sharing options...
1dirtypanda Posted July 16, 2014 Report Share Posted July 16, 2014 50g X-flex dia b?!?!?!?! Link to comment Share on other sites More sharing options...
akm10408 Posted July 16, 2014 Report Share Posted July 16, 2014 Would you consider selling the 388 head by itslef? I don't have much need for a 50g, unfortunately. Link to comment Share on other sites More sharing options...
sbeaz Posted July 17, 2014 Author Report Share Posted July 17, 2014 50g X-flex dia b?!?!?!?! Yeah, I know....can I plead temporary insanity? Link to comment Share on other sites More sharing options...
sbeaz Posted July 17, 2014 Author Report Share Posted July 17, 2014 Would you consider selling the 388 head by itslef? I don't have much need for a 50g, unfortunately. Of course. I don't even have a need for a 50g shaft. Link to comment Share on other sites More sharing options...
Hutch Posted July 17, 2014 Report Share Posted July 17, 2014 superb...keep us posted fella Link to comment Share on other sites More sharing options...
akm10408 Posted July 18, 2014 Report Share Posted July 18, 2014 Of course. I don't even have a need for a 50g shaft. Haha, such are the ways of science. PM sent Link to comment Share on other sites More sharing options...
Bunches Posted July 19, 2014 Report Share Posted July 19, 2014 (edited) I'm looking for another set of Epons (302, 316 or Tours) but heads only. Edited July 19, 2014 by Bunches Link to comment Share on other sites More sharing options...
sbeaz Posted July 19, 2014 Author Report Share Posted July 19, 2014 I'm looking for another set of Epons (302, 316 or Tours) but heads only. I don't see a problem there. Oh my goodness, you have one of those hard to find Miura 64K....Great club? Link to comment Share on other sites More sharing options...
Bunches Posted July 20, 2014 Report Share Posted July 20, 2014 (edited) I love the 64K, but I've been using a 64º as my main club around the greens and greenside bunkers for over a year and a half. Now I have the finesse of a 64 with the added benefits of a K grind. I have all four and rotate them depending on where I'm playing but I'm ready to get rid of the Spinner Wedge + shaft I ave in the 56º. I like the regular Spinner in the 60 and 64, but the Wedge + just seems neither here nor there. I'm going to try the NS Pro WV125. Edited July 20, 2014 by Bunches Link to comment Share on other sites More sharing options...
freehb04 Posted July 21, 2014 Report Share Posted July 21, 2014 vs, I never really liked Miura but you're making me think it's cool again and wanting some of those k grind wedges....nah, you should replace those w 213s....the k's are beautiful but am guessing they have that dense crisp feel I've had from other Miura offerings and I'll take soft and forgiving...still, very sexy... Link to comment Share on other sites More sharing options...
sbeaz Posted July 21, 2014 Author Report Share Posted July 21, 2014 I love the 64K, but I've been using a 64º as my main club around the greens and greenside bunkers for over a year and a half. Now I have the finesse of a 64 with the added benefits of a K grind. I have all four and rotate them depending on where I'm playing but I'm ready to get rid of the Spinner Wedge + shaft I ave in the 56º. I like the regular Spinner in the 60 and 64, but the Wedge + just seems neither here nor there. I'm going to try the NS Pro WV125. Those are SWEET. Especially the 64K. How did you get it? Do you know Miura-san personally? Link to comment Share on other sites More sharing options...
Bunches Posted July 21, 2014 Report Share Posted July 21, 2014 freehb, they do have that solid, dense feel, but I prefer that for short game play. They are sexy wedges, if a wedge can be sexy. They're a conversation icebreaker too. sbeaz - Miura-san made it just for me and calls it the Valerie Grind :) I kid, I kid. Frank Viola was able to have a few made and he's the only source for them. I believe there was less than a dozen forged. I've had it since May and baby my clubs, but you can see from the sole, it's a gamer. It's a breeze for green side bunkers and my main club around the greens. Back to your 302 heads... Link to comment Share on other sites More sharing options...
sbeaz Posted July 22, 2014 Author Report Share Posted July 22, 2014 yes...the 302's. Is there an offer I can't refuse? Link to comment Share on other sites More sharing options...
Bunches Posted July 22, 2014 Report Share Posted July 22, 2014 Based on what you're asking for them with the shafts, I think we'd be too far apart and I don't want to insult you. I saw your listing on the Bay and think you'll probably get it on there. Thank you for the consideration and GLWS. Link to comment Share on other sites More sharing options...
proswing89 Posted July 23, 2014 Report Share Posted July 23, 2014 I am interested in the shaft,if Bunches willing to take the Epon AF-302 Heads. Link to comment Share on other sites More sharing options...
sbeaz Posted July 23, 2014 Author Report Share Posted July 23, 2014 Teamwork. Let's see if we can make this work.... Link to comment Share on other sites More sharing options...
Recommended Posts