bngolfer Posted December 11, 2015 Report Share Posted December 11, 2015 I need to clear out some sticks that are too good to sit around. Starting with a few wedges: Epon 210 KGX 54° and 60°. They are shaved for trailing edge relief and they have been ported to keep the swing weight down (to accommodate a lighter shaft). The ports can be filled with epoxy/tungsten to get the weight up to desired head weight. I think they are shafted with Aerotech Steelfiber but I don't want to take the grip of and the shafts are clean. The wedges are very lightly used as can be seen from the pictures. As they have been modified and I'm uncertain on the shafts I will put a low price of: $100/club or $175 for both + shipping from Sweden. Chikara v.1 Prototype 53° Used for one round only. Really ground to work on courses with lush fairways and as I'm from Sweden - not made for here. We can play golf 4 months/year if we are lucky and there is no such thing as "lush" around here.. It has black oxide finish and it has some rust but metal is perfect. Shafter with KBS black nickel in S-flex and has a carbon ferrule. Black and white multi compound. Super expensive wedge - this was the last prototype I could find and had to shell out $500 for the head alone.. $200 + shipping from Sweden. I'm open to trades folks. Forged CB iron heads are top of my list. There will be more posts with woods and putters later. Link to comment Share on other sites More sharing options...
Ian-500 Posted December 11, 2015 Report Share Posted December 11, 2015 Hi. Regarding the shafts in the Epons. If there is no shaft band/label then I would suggest that the shafts are probably C-Taper rather than Steelfiber as the colour/finish if both do look very similar. Link to comment Share on other sites More sharing options...
bngolfer Posted December 11, 2015 Author Report Share Posted December 11, 2015 Hi, I have a c-taper next to them and they feel differently. Lighter and a different sound to them. But still, possible. Thanks Ian Link to comment Share on other sites More sharing options...
bngolfer Posted December 12, 2015 Author Report Share Posted December 12, 2015 Other trade interests include RC 6150 black wedges and a bag. Link to comment Share on other sites More sharing options...
bngolfer Posted December 17, 2015 Author Report Share Posted December 17, 2015 Price drop. 150 for both Epons (jeez that's cheap) and 160 for the Chikara. Trade for compact wedges; shafts; grips (only with reminder/ribb or Gripmasters); iron heads etc interesting. Don't need drivers/fw ore utes. Link to comment Share on other sites More sharing options...
bngolfer Posted January 3, 2016 Author Report Share Posted January 3, 2016 Sold - thanks Frank! Link to comment Share on other sites More sharing options...
Recommended Posts