TourSpecGirl

A few weeks ago we posted a Honma Beres S-05 4 Star Fairway Wood today we have the matching 4 Star S-05 Driver custom ordered from the SAKATA Factory in Japan with a custom matte black crown & 4 Star Shaft. We also had SAKATA adjust the standard face angle slightly open to promote a fade.

Do you know the head weight and volume of the 907? The Roddio shaft W-7BA will frequency out at 282 cpm on 435cc OnOff driver (198.2g) at 45" D2. However, Srixon W-505 (201.7g) driver at the same specs is about 276 cpm. It depends on the Volume, head weight, length, and other factors. However, being Roddio certified we can adjust the cpms to the tee at + or - 1 cpm at your request.

Sorry for the delay! This thread will be up & running this week.

I'd say get the Ozik Xcon Altus shaft in Firm (71g). It has a little more spin & a more active tip to help you release. Sounds like that'll be a great setup for you. Good luck!

At the Pod championship in Tampa, the count was around 18 to nineteen. Names as follows: Barlow, Choi, Coles, dufner, duke, Howell, Imada, Leaney, Na, Petrovic, Putnam, Wi, Lile, and Howison. At Bay Hill, Matrix picked up Kenny Perry with a code 8 and Craig Perks with a XCON 6, and seven. Arnold Palmer played with a new three and five wood fueled by XCON 6. He was so happy he called from the course and ordered a driver shaft to match. Mr. Montgomery showed up Tuesday and had his Ozik irons shafts in Yonex clubs. He told our tour rep “Thanks lads.” Perry and Sergio asked for drivers to test but the TaylorMade boys unhappily declined due to the lack of graphics...... no graphics no chance. Maybe that will change for next week.

I just measured on we got in stock here. I got 19 7/8" tip to graphics.

These with the matching MP-67s are by far the sweetest custom Mizunos I've seen. And I've seen them all! The Pics don't do it any justice.

Here ya go! The Lepon Specs below are standard. But like all Epon orders, they can be custom built to whatever specs you want!! Club Head Loft Lie Length Balance Total Weight Driver 322cc 12 60 44" C-5 292g #3FW 138cc 16 58 42" C-6 305g #5FW 123cc 18 58.5 41" C-6 313g #7FW 109cc 20 59 40.5" C-6 318g #9FW 103cc 22 59.5 40" C-6 320g #6Iron 25 61.5 37" C-4 362.5g #7Iron 28 62 36.5" C-4 365g #8Iron 32 62.5 36" C-4 369.g5 #9Iron 37 63 35.5" C-4 376g PW 42 63.5 35" C-4 384g AW 50 63.5 34.5" C-5 395g SW 56 64 34" C-5 403g

It is dead easy to hit too. I ♥ it! Oh yes, I should have thought of these when you asked. I agree they are nice indeed. I'll post the specs soon. You got my double bend?? haha nah kidding! Well just to let you know..you got it for cheaper than me!!

Here's my current set up. I'll update this soon with full pics of my bag. Finally a premium forged women's set! The driver has that same soft feel as the Epon 460 and I've found with this softer GD shaft I am hitting it a lot longer as well. The difference between the forged Lepons compared to my old Taylormade 360 ladies set are night & day. Much softer feel at impact. They are super forgiving as well. Did you see my wedges?? I am so confident with those. Chris likes them too!! LEpon forged titanium driver LEpon forged woods LEpon forged women's iron set LEpon forged wedges Taylormade Corza Rsi Plumbers neck

The Endo Niigata factory tour was remarkable!! They kept stressing exclusiveness of our private tour with only high profile figures seeing the factory grounds we witnessed. You gotta hand it to Chris to get us in with the head designer and President Mr. Kobayashi showing us through the factory & explaining the whole process!! I must say that what stood out to me was the quality control and tight tolerance. The process is redone even if off by the slightest infraction. I've seen first hand that everything must be perfect and approved by a superior. Also FYI, an approved video to show you all the entire process is in the works. Two thumbs up for Endo!!

There's a left handed category here: http://www.tourspecgolf.com/catalog/index-57.html Also, from what i seen so far at the Japan Golf Fair, lots of choices for left handed players soon to be released.

Guess who's being trained by Daiwa to fit roddio shafts? Coming Soon..

Stiffer Performance for Driver and Standard Performance for Fairway wood: Blind Bore - ½" Tip. Bore Through - No Tip. Insert shaft to 2" depth.

New lines of OZIK shafts for 2007 For 2007, Matrix will be adding a new family to the OZIK franchise targeted for spin control. It will incorporate OZIK Altus and many of the ideas learned from Medius and Infra. The new OZIK weights as low as 54g and as high as 88g. With some bright, exciting color options... :tsg_smilie_cool: Also I must add that there will not be a Code-5 widely released, as is rumored. Any questions or comments?