dcc14

Make - Bridgestone Model - J33 Loft - 15* Shaft - YS7+ (S) Length - 42.75" Grip - Tour Velvet (down) Swingweight - d2 (with tape) Cover included This fairway is in solid condition. (a definite modest 8.25 out of 10) Played 10 rounds or so and only shows normal face & sole wear. No skyball marks on crown whatsoever. No nicks, chips of any kind. $95 shipped & paypalled / [email protected] Make - TM Model - Rescue Mid Loft - 19* Shaft - Bonzai (S) Length - standard Grip - Tour Velvet (down) Swingweight - d1/2 Cover included This hybrid is in solid condition. (a definite modest 8.25 out of 10) Played 10 rounds or so and only shows normal face & sole wear. No skyball marks on crown whatsoever. No nicks, chips of any kind. $77 shipped & paypalled / [email protected]

RB, Payment received. :cool: I'll email you with all the shipping info :wink: Dave

Make - Miura Model - 201CB 4-7 / Tourney Blade 8-PW Specs - 1* strong / 1* up / length: standard Swingweight - 4-9 D2 / PW D3 Shafts - 5.5 PX's (shaftbands removed) Grips - Tour Velvet (down) Paintfill Removed link to pics: http://www.dell.kodakgallery.com/BrowsePho...lid=18658295408 This set was built by Paul @ Shreveport just a few weeks back & they are absolutely unreal. (at least an 8.75 out of 10!) :cool: I've played them 7 rounds or so & they had about 7 on them when I received them / so 14 total rounds & 5 range sessions. No nicks or dings of any kind whatsoever & only minor sweet spot wear) The 7 iron definitely shows some more visible signs of use (nothing that will affect playability) but Paul is replacing that iron asap so you will have a new 7iron! I'm letting someone steal these from me for $610 shipped usps priority with delivery confirmation & insurance. (need the :money:) verified payapl address: [email protected]

+1, You are absolutely insane, :surprize: but I'm loving it! :cool: Good luck testing them all out when they arrive & have fun doing it. If you ever want to part with the H. Mades after your gauge death match is complete, shoot me a pm. :wink: Dave

I think these irons look pretty darn good. :cool: I'm just trying to picture them without the fill. :wink: Dave

Yeah, pics would be sweet if they're available. :cool: Dave

MZ, Thanks for the info, much appreciated. :cool: It's fair to say I'm more than excited to give this combo a run myself! :wink: Dave

I hope it's sooner rather than later as the frigid weather :mad: is on it's way here to NY & I want to get a few weeks in with these beauties. :love: Dave

As soon as I get them in play with the 1150's I'll be sure to post a review. :cool: Dave

+1, I think I'm going 1150 tours (S) softstepped to get them around a 5.5 freq. I'm a 5.5 px guy, but I want to give the nippons a shot for the added 'feel'. I know you moved on from the 750 wraps but did you go back to the px's or another nippon?

BE, Sent you a pm. I have one on order that should be here in the next few weeks. :wink: Dave

It's still rainy/cloudy so the pics aren't great, but definitely better than the indoor shots yesterday. link to pics: http://www.dell.kodakgallery.com/BrowsePho...lid=54187435408 Dave

BTW, I'd like to learn how you focus on everything but the club in every picture. LOL. :whistle: I hear you BE! :smile1: The camera is not the greatest & indoors you might as well forget about it. When I get to snap them outside the focus equation usually improves a bit. :wink: Dave

link to pics: http://www.dell.kodakgallery.com/BrowsePho...lid=54187435408 I apologize for the crapiness of the pics, but it's pouring here in NY so I couldn't get outside to snap quality ones. I'll do that when the rain quits! Just wanted to get them up for people to look at. :wink: Dave

I definitely don't think it's the prettiest hybrid on the market, (not the ugliest either, imo) but to me it inspires confidence at address & that's all I'm looking for. :wink: Dave

Make - Taylor Made Model - R7 TP Loft - 10.5* Shaft - YS6+ (S) Length - 44.75" (gripped) Grip - Tour Velvet (down) Paintfill Removed Full Weight Kit Included Sorry, No Headcover Link to Pics: http://www.dell.kodakgallery.com/BrowsePho...lid=71288615408 This club is in very good condition and has been played a total of 14 rounds & 5 range sesions (grass). (8.5 - 8.75 out of 10) No sky ball marks or nicks/chips of any kind whatsoever. Just normal sole wear & lite face wear. $270 shipped usps priority with delivery confirmation & insurance. paypal address / [email protected]

+1, Definitely some sweet grips! :cool: I like the set up & pink looks pretty darn good to me. :smile2:

+1, You need to work out a scenario where you can have the best of both worlds & keep both sets. Sell off some other stuff, but NOT those studios. Hold off on picking up the 320 CX & put that $ towards the MB2's. Do a little creative thinking, but don't part with the cb's. Just my opinion though! :cool: Dave

AFN & +1, Engraving was done by Kevin Colbert @ putterplating.com (ckeck out the site) They do fantastic work & can do anything you can think of. I had a betti that they put an American Flag on (toe) & a few other custom designs on various other putters as well. :love: I don't think it's too expensive at all. I believe it was $40 shipped for all the engraving. (I paid an upcharge for overnite, so it was $55 or so) Well worth to me as the work is flawless. I think the entire process bewtween shipping to MN, then back to me in NY took about a week or so. +1, These grips are sick! :cool: I almost went with pink but I need to start draining a few more puts before I'm smooth enough to go that route. : :laugh: Yes, my daughter's name is Lucia, but we call her LuLu or Luci, hence the LuLu on the toe & luci on the flange with her date of birth - 5/14/05

ACG, Can't the site line be filled in without too much difficulty? Obviously it's easier said than done, but I'm sure it's doable. Dave

link to pics: http://www.dell.kodakgallery.com/BrowsePho...=1&sort_order=0

I received the pics & downloaded them OK. Unfortunately the site I use (dell/kodak) to host is not functioning correctly @ present. I'll get them up asap. Sorry for the delay & thanks for the pics. Definitely resemble the z101's pretty strongly. Dave

email them to me & I'll post a link to pics ([email protected])

updated pics of 'My One' / custom engraving done by Kevin Colbert @ putterplating.com. (LuLu added to the toe & luci - 5/14/05 added to back flanges link to pics: http://www.dell.kodakgallery.com/BrowsePho...lid=13176804408 Dave

+1, I'll help ease your decision making process a bit. Unfortunately the ViQ is no longer available as production has ceased. I was in the same boat & had actually ordered the ViQ but will now be sliding over to the 320 CX. I pm'd Chris in regards to shaft options/if any; I'll pass all info along to you when I hear back. Dave