Posted December 4, 200717 yr comment_145487 In the quest to make the PZ Insert more affordable Master Sasaya has created a way to keep the same performance, roll and feel as that expensive premium zone insert style he builds. Its simply milling the exact same measurements to the entire surface of the face itself. This version is more than 50% more affordable than the insert version.
December 4, 200717 yr comment_145490 I kind of thought it was just a matter of time before this happened. and I thought I was thru buying Putters.... looks like the drawing board is going to be busy again... Sadly, I have to know if one is going to feel better than the other. Actually can't imagine it could be much better but only one way to find out!!!!
December 4, 200717 yr comment_145501 WOW - this is just like the RIFE putter grooves are made: If the more traditional way makes a softer better feeling putter, I would surely will pay that bit extra to get the best of the best - but on the positive side, the new way of making the premium zone grooves means that you won't see the 4 ugly screws in the cavity of the putter - this is definitely a step forward from a designers point of view. Is it possible to ask Master Sasaya what he thinks will feel better of the two - the PZ insert or the PZ stamping on the face of the putter ?
December 5, 200717 yr comment_145516 DOH! Don't look back... You will have no regrets.... get ready for the best Putter on the Planet... I don't know why but I think the insert looks better and is going to have the best feel of the two Putters... I like the look of the little screws...
December 5, 200717 yr comment_145524 Heh heh, I was just joking. I completely agree with you, I've never played an insert in my life but I love the way Sasaya-san's insert looks. I actually like the screws too! Don't look back...You will have no regrets.... get ready for the best Putter on the Planet... I don't know why but I think the insert looks better and is going to have the best feel of the two Putters... I like the look of the little screws...
December 5, 200717 yr comment_145533 i am glad i havent pulled the trigger yet. big time savings! A BIG TIME DITTO from me on that But if the original insert way feels better, then I can live with the 4 screws in the cavity.....if not, then I'll be happy to loose the 4 screws and get some flashy blue Golds circles in the cavity to spice up the overall design of this fantastic putter - I will probably go for 3 flashy blue Gold's Factory circles like these:
December 10, 200717 yr comment_145684 Question, if my exsiting putter has just the mill marks, Can I send it back to Sasaya-San to get it milled with the grooves?? I like the insert but it's out of my price range?? Lastly, Can I change my flat black finish to something like Teflon Black?? Does Teflon back require periodic milling??
December 10, 200717 yr comment_145685 Chris is the one to have the exact answer, but... You can send your Putter back to the Master and have whatever you want to have done, added/done to the Putter. I don't believe any of the Masters Putters require periodic milling unless you are using the Putter to the point of needing refinishing. I have played no less than 80+ rounds with my gamer, practiced extensively, and it is still in excellent condition. Granted I take care of my Putter, it is very durable. This is the one club that if you get done right, (and I have) that you will be the most happy with. Worth every dime spent and then some. Can you tell I love my Golds Putters???????????
December 10, 200717 yr comment_145688 Chris is the one to have the exact answer, but...You can send your Putter back to the Master and have whatever you want to have done, added/done to the Putter. I don't believe any of the Masters Putters require periodic milling unless you are using the Putter to the point of needing refinishing. I have played no less than 80+ rounds with my gamer, practiced extensively, and it is still in excellent condition. Granted I take care of my Putter, it is very durable. This is the one club that if you get done right, (and I have) that you will be the most happy with. Worth every dime spent and then some. Can you tell I love my Golds Putters??????????? we know you love them:) this new milled premium zone style may be the ticket hopefully after closing my eyes and pulling the trigger i will save money on the long run by not upgrading my putters every month...
December 10, 200717 yr comment_145689 we know you love them:) this new milled premium zone style may be the ticket hopefully after closing my eyes and pulling the trigger i will save money on the long run by not upgrading my putters every month... C, I made a post a while back that says something to the fact that you will not be buying any more Putters once you get one made for you, to your specs, with the PZ insert or now the PZ milled face, by the Master.
December 10, 200717 yr comment_145690 C,I made a post a while back that says something to the fact that you will not be buying any more Putters once you get one made for you, to your specs, with the PZ insert or now the PZ milled face, by the Master. i defintely agree. one time investement. and to think i just got 3 custom made putters from the usa in the last month if you add those all up i could have gotten one tricked out gold's! grrrr
December 10, 200717 yr comment_145711 My sentiments exactly! That's why I went straight to the top, bit the bullet and got the Gold's Factory putter. i defintely agree. one time investement. and to think i just got 3 custom made putters from the usa in the last month if you add those all up i could have gotten one tricked out gold's! grrrr
December 11, 200717 yr comment_145719 Does Master Sasaya or Gold's in general make anything for us left handers? I'm new to the forum but I noticed that the lefty is even more left out with japanese equipment than we are in the US! , Edited December 11, 200717 yr by 1967cougar
December 11, 200717 yr comment_145722 Does Master Sasaya or Gold's in general make anything for us left handers? I'm new to the forum but I noticed that the lefty is even more left out with japanese equipment than we are in the US!, pm tourspecgolfer im sure he can work something out for you
December 11, 200717 yr comment_145728 I'm a believer of the grooved technology and this looks like a must get item. Just wanted to finalize on the specs before placing the order. Hope someone with experience in PZ insert or these milled groove can shed some light - I notice that the standard loft for Golds putters are at 5.5* and this is fine with the slow and bumpy greens I sometimes play on. However, with the grooved face, should the loft be decreased by 1 to 2 degrees? Any info on this will help me to decide on the final specs. Thanks guys. I can't wait to compare this putter to the BB-8 FIT face I currently using and will report back once I get my hands on it.
December 11, 200717 yr comment_145734 I'm a believer of the grooved technology and this looks like a must get item. Just wanted to finalize on the specs before placing the order. Hope someone with experience in PZ insert or these milled groove can shed some light -I notice that the standard loft for Golds putters are at 5.5* and this is fine with the slow and bumpy greens I sometimes play on. However, with the grooved face, should the loft be decreased by 1 to 2 degrees? Any info on this will help me to decide on the final specs. Thanks guys. I can't wait to compare this putter to the BB-8 FIT face I currently using and will report back once I get my hands on it. Re Loft: I had wondered the same thing. But, IMO don't change it. I'm glad I didn't. Trust the Master. I have a Bett with the FIT grooves also. Very nice Putter. Very interested in your opinion after you've had a chance to roll the Golds and the Betty side by side. For me, nothing has come close to knocking the Golds out of the bag. Feel wise or Performance wise. Another thing for me that seems to make a big difference, is the way the Golds sets up... just something a little bit different.. IMO it just sets up better.
December 11, 200717 yr comment_145735 this one with a floating face would be something id be interested in
December 11, 200717 yr comment_145740 Re Loft:I had wondered the same thing. But, IMO don't change it. I'm glad I didn't. Trust the Master. I have a Bett with the FIT grooves also. Very nice Putter. Very interested in your opinion after you've had a chance to roll the Golds and the Betty side by side. For me, nothing has come close to knocking the Golds out of the bag. Feel wise or Performance wise. Another thing for me that seems to make a big difference, is the way the Golds sets up... just something a little bit different.. IMO it just sets up better. I just came into the Flatstick forum to post a question about the feel between the Golds milled face (and by extension the Premium Zones) versus the new Bettinardi. Idrive, could you expand a bit more on the difference in feel?
January 31, 200817 yr comment_147159 Can anyone tell me where I can select this option in the ordering menu? I think it is near the bottom under the custom face and loft option ($125) but I am not sure. Thanks.
February 10, 200816 yr comment_147418 250.00 for the PZ milled face. I'll add the option now, but if you're making a custom putter best to get an order form from us and send us for a custom quote.
November 9, 200816 yr comment_152817 I'm curious about the PZ Face Milling on the Gold's putters. For those of you that have used it, do you think it really gives a better, more accurate roll than the Gold's putters without the milling? I am toying with the idea of getting a custom Gold's and am wondering how much difference this will really make. Anyway feedback welcome. Edited November 12, 200816 yr by Foster Pann
November 12, 200816 yr comment_152868 I'm curious about the PZ Face Milling on the Gold's putters. For those of you that have used it, do you think it really gives a bitter, more accurate roll than the Gold's putters without the milling?I am toying with the idea of getting a custom Gold's and am wondering how much difference this will really make. Anyway feedback welcome. When you Putt the ball, especially the longer Putts, do you notice the ball "skidding" before it starts rolling true? "Skidding" is almost eliminated with the PZ milling. Softer feel and the roll is much more true/accurate. I would strongly recommend the PZ milling.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.