Posted March 24, 201014 yr comment_159826 New Irons arrived to battle for top spot in my bag. I also wrote a blog post on these new irons over at GTI.
March 24, 201014 yr comment_159829 oh...............I dont think I should be this 'excited' by golf clubs?????????? that is an excellent Blog Chris. I have recently had a similar experience when demoing the 502's with a customer. I hit a few shots with the 502 7 iron which went miles which really caught my attention I can tell you. I'm normally not a short hitter, stock 7 iron with the AF-Tour is 160m (175 yards) and I was 15% longer again with the 502. Although I got the 'lefts' a bit due to the demo clubs being fitted with KBS Tour 90 R flex shaft as opposed to my KBS Tour 5.5's the 502's were exceptional and a definate improvement in feel terms over the prior 501. I also hit a poor shot out of the toe and suprisingly the ball flew truely settling only a couple of metres from where the pure strikes were landing. Despite the AF-Tours being very forgiving for a MB blade, had I struck the ball that poorly I would have been penalised 1/2 - 3/4 club. I'm certainly motivated to get a complete set of 502's built for myself because of this experience. The only issue I would need to sort out is clubbing with the short irons........... Edited March 24, 201014 yr by EPONfreak
March 24, 201014 yr comment_159830 very nice chris, was contemplating with a set of coppers but decided with the regular finish instead. is that the same finish as in the black kgx wedges?
March 24, 201014 yr comment_159837 Considering the 302's at the moment and was wondering if that black finish holds up. Have you gamed that finish at all and how does it compare to the chrome or satin? Upcharges? David
March 24, 201014 yr Author comment_159844 The Black and Copper finish will wear fairly quickly. Also I dont suggest it for states with high humidity or salt levels. I am going to take pics after 3 rounds of golf to show you guys how it wears and post it in this thread. After every round I will do a quick spray of WD-40. I don't use iron covers.
March 24, 201014 yr comment_159845 They look amazing new, that's for sure. Would be awesome with my Black Nickel KBS Tours.....
March 24, 201014 yr comment_159846 They look amazing new, that's for sure. Would be awesome with my Black Nickel KBS Tours..... If you're going with that finish, you'd better be sure you're hitting the ball out of the middle (especially on bunker/sand shots). I couldn't stand pulling out a club with a bullseye mark on the toe.....
March 25, 201014 yr comment_159852 If you're going with that finish, you'd better be sure you're hitting the ball out of the middle (especially on bunker/sand shots). I couldn't stand pulling out a club with a bullseye mark on the toe..... yup! also note that the black finish will whiten out on the sole and on the face quicker than the copper. the standard finish is by far the most durable finish. zero maintenance whatsoever.
March 25, 201014 yr comment_159863 yup! also note that the black finish will whiten out on the sole and on the face quicker than the copper. the standard finish is by far the most durable finish. zero maintenance whatsoever. If it's the usual black finish it does rust easily if you're in Thailand (or any other hot humid place). My 'copper' 301's though are fine - no rust issues, and wear is 'normal'... meaning i can see they've been used, but i kind of like it. Here's pics of my 7 iron just so you've an idea - i've been using this club a LOT, as i've been working with a pro on my swing - so lots of practice off mats.... no iron covers used, either.
March 25, 201014 yr comment_159865 If it's the usual black finish it does rust easily if you're in Thailand (or any other hot humid place). My 'copper' 301's though are fine - no rust issues, and wear is 'normal'... meaning i can see they've been used, but i kind of like it. Here's pics of my 7 iron just so you've an idea - i've been using this club a LOT, as i've been working with a pro on my swing - so lots of practice off mats.... no iron covers used, either. The copper looks really nice and the good thing is that if you do make an idiot mark it will eventually tarnish and fade away (unlike the black).
March 30, 201014 yr comment_159941 omg the black finish on those 502s is amazing! ive never seen such a finish on an iron before. what kind of finish is that and whats the process involved with them, is it like powdercoating or something?
March 30, 201014 yr comment_159944 Is there an upcharge from Epon for the different finishes? yup there is an upcharge. pm gocchin or tourspecgolfer. i can also imagine copper finish looking stuning on this one.
March 30, 201014 yr comment_159946 yup there is an upcharge. pm gocchin or tourspecgolfer. i can also imagine copper finish looking stuning on this one. I live in Sweden so can't buy Epon fromTSG. Luckily the shop I go to, and where I know one of the owners happens to carry Epon so I can get it from there. Just wanted a ball park figure, so I'll know if it's feasible. Was thinking about the 502s in copper actually.
March 30, 201014 yr comment_159947 I live in Sweden so can't buy Epon fromTSG. Luckily the shop I go to, and where I know one of the owners happens to carry Epon so I can get it from there. Just wanted a ball park figure, so I'll know if it's feasible. Was thinking about the 502s in copper actually. copper will be awesome. go for it!
March 31, 201014 yr comment_159959 Chris, Have you played with them yet? How do the crazy shaft feel in comparison to your rodio shafts? I am, like many others, feel the urge to ho again for a new set of blades. Still have the yururi and MB 5003 I bought from you. But my curiosity is peeked and I am pondering over trying a custom head with a graphite shaft. Interested to hear feedback from player who tried the Golds Factory and Kyoei Zestaim Fi-2. Thanks guys, F
April 5, 201014 yr Author comment_160050 The finish is holding up after 2 1/2 rounds. I'm still getting used to them I have a slight leaking to the right issue going on. I plan to take pics and post a longer review in this thread after a couple more rounds or whenever i figure out my problem.
April 5, 201014 yr comment_160053 The finish is holding up after 2 1/2 rounds. I'm still getting used to them I have a slight leaking to the right issue going on. I plan to take pics and post a longer review in this thread after a couple more rounds or whenever i figure out my problem. could it be the shaft?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.