supo Posted April 11, 2015 Report Share Posted April 11, 2015 Gamed today 44.75 inch x 316gram x 201.5gram head x D2.75 swing weight Diamana x 60s shaft tipped 0.25 inch cpm267 Boy is this a small head.,Dead flat dead square , lovely looking mat grey convex face Tiny face really nice looking head. Feel,is first class, not quite as lively as the syard nor kasco but not too far off. The more i hit it the better it got Its very low, vsthe egg7.5i cudnt really see too much of a difference. Feel was totaly diferent themdifference in head weights made abig difference. Egg was 44.5 inch More lively electric feel def the prgr. Delivers a prettyy good straight,flight for the most part distance was hard to judge bec it was a s**ttttty day But icertainly wasny longing for another driver. Both were struggling today conds were pretty awful so i guess it was a good day to test them. Scored wel today so i hit a lot of fairways Misses were almost always right baby draw very achievable with this club.tee height needs to be a bit higher than average to get the ball up. This wants to go low. Rating .., Yea it rates wasnt really expecting big things to be honest figuered it was al mouth no trouser. Jsut another markeing brand. But i wa smore than pleasantly surprised,by its performance The 60s shaft was no where near underwhelming either This is a really good build. Have no hesitation in recomemdiing it , to the right person it will be a good driver. Not sure where ill play it but suffice o say its gotta go headmto,head vs the kasco to prove its worth As,of,today thoughts ,yea its more than decent Way more in fact. Be good to see it go when i can get a ball to release a bit on the fairway today ws. 100 % carry. Quote Link to comment Share on other sites More sharing options...
chiromikey Posted April 11, 2015 Report Share Posted April 11, 2015 Thanks buddy! Bring it out next weekend... ;) Quote Link to comment Share on other sites More sharing options...
supo Posted April 11, 2015 Author Report Share Posted April 11, 2015 Youll be the first to hit it Quote Link to comment Share on other sites More sharing options...
Spoon Posted April 12, 2015 Report Share Posted April 12, 2015 If you could do it again will you still get 9.5 or a higher loft? This is also in the radar for me. Quote Link to comment Share on other sites More sharing options...
sundowner Posted April 12, 2015 Report Share Posted April 12, 2015 Tried the first time the A-Grind 10.5. Club face is very very hard. At adress perfectly and stable thru the swing. As the angle of gravity seems around 18-20 deg. which shafts give enough kick and which also gives enough spin for this "spin killer"?? Quote Link to comment Share on other sites More sharing options...
supo Posted April 13, 2015 Author Report Share Posted April 13, 2015 If you could do it again will you still get 9.5 or a higher loft? This is also in the radar for me. def not, the 9.5 suits nicely, it will just need to be broken in. when i put the tee higher it made a bif differnce. cant say anyhting til i get it on my home track this wekeend in th dry. but it was pretty good. Quote Link to comment Share on other sites More sharing options...
supo Posted May 9, 2015 Author Report Share Posted May 9, 2015 This is one finicky beast. Shaft choice is paramount on thisnhead my lighter,shaft doent suit me 1bit. Its veryvery low , its consistant in distance , its very very straight and runs miles but its hard to get used to, Think shorter heavier higher flight shaft choice. Quote Link to comment Share on other sites More sharing options...
theblake Posted May 10, 2015 Report Share Posted May 10, 2015 I think this needs a 43.5" shaft., then the smaller head won't matter Quote Link to comment Share on other sites More sharing options...
Spoon Posted May 10, 2015 Report Share Posted May 10, 2015 I think this needs a 43.5" shaft., then the smaller head won't matter Going to build mine to 44" And put in a sigma Fw 80 7.4 shaft Quote Link to comment Share on other sites More sharing options...
Spoon Posted May 12, 2015 Report Share Posted May 12, 2015 stew, how will a bimatrix shaft do in this head? i have one in 77g stiff. Quote Link to comment Share on other sites More sharing options...
supo Posted May 12, 2015 Author Report Share Posted May 12, 2015 (edited) good. like it Edited July 19, 2021 by supo Quote Link to comment Share on other sites More sharing options...
Spoon Posted May 12, 2015 Report Share Posted May 12, 2015 i think this will be a really really good match. blakey, i think is dead right , this needs to be considered a large 2 wood , rather than a long driver. will make it much more consistant im sure think i finalyl found a use for the diamaman kaili 100g proto shaft!!!!!! i like the sounds of 2w. if this is 15 more yards than my ryoma f2 id be really happy! Quote Link to comment Share on other sites More sharing options...
supo Posted May 12, 2015 Author Report Share Posted May 12, 2015 its a proper driver , its not a fariway wood . good heavens no, ud never get if off the ground 43.5-44 inch with a heavy , higher launch shaft. its gotta be the gd p9003x surely................., Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.