Jump to content

Mjr. D

Members
  • Content Count

    1868
  • Joined

  • Last visited

Everything posted by Mjr. D

  1. The original Diamana X. Stupid straight, mid launch, low spin. Extremely smooth feeling shaft. MSRP was $900. Asking $199.95. Professionally pulled. 9/10 shape. XX flex - feels and plays like an X. 42 3/4" PM me. Thanks and enjoy!
  2. Onoff Forged Irons - SOLD 3-PW (paid an additional $200 for the 3 iron) instead of standard 4-PW Super rare Fujikura MCI Tour only shafts - X flex. Array of exotic Japanese grips to try. All spined and pured. $775 $25 Shipping US Original Diamana X Shaft. MSRP was $900 XX Flex. Incredibly smooth and straight. Mid flight. Low spin. $275 + $15 shipping continental US Gauge Design Premium Zone Putter Comes with Nippon Heavy Putter shaft. Japanese Elite Putter grip SUS 304 super soft insert. Like super soft. Free UST Frequency Filter - 30.75 - 96g $175 - $15 shipping - Continental US. 2017 Epon Tour Wedge - 60 Degree. MSRP is $375. Precision Forged in Japan. Incredible feeling and super versatile wedge. Excellent condition with very little use. Hosel has been reamed out slightly. 300g $249.95 - Free Shipping US. [email protected] - PayPal. Thanks guys. Enjoy!
  3. It's hard to say. It depends on the width of the shaft tip. You might want to use shaft beads and a little extra epoxy and all will be good. Depending on shaft width, a shim could be used. You'll notice no impact on performance whatsoever though. Hope that helps. Rob.
  4. 2017 Epon Tour Wedge - 60 Degree. MSRP is $375. Precision Forged in Japan. Incredible feeling and super versatile wedge. Excellent condition with very little use. Hosel has been reamed out slightly. 300g $275 - Free Shipping Titelst Vokey Cold Forged Wedge Set straight from Japan - 52, 56, 60 Degree. MSRP was $250 per wedge. US Vokey wedges are cast whereas Japan Vokey's are Cold Forged for superior feel. These are buttery soft and perform extremely well from any lie. Super versatile wedge. Excellent condition, very little use. 300g, 296g, 290g $495 - Free Shipping. Seven 2016 Original Wedge - 64 Degree [/b]Insane Spin and very versatile, similar to the Vokey. Excellent condition. 306g $150 - Free Shipping Modus 3 System 125 Wedge Shafts, Shimada Tour Black Wedge Shafts, True Temper Spinner Shaft Selling these together for the guy who likes to experiment. Modus Lengths - 34.25", 34", 33.25" (.360 tip), 33" Shimada Lengths - 34.25" - 115g, 34" - 114g Spinner - 34 3/8" - 114g $125 - Free Shipping Continental US. $20 International Putter Shafts UST Frequency Filter - 30.75 - 96g Shimada 121-P 120g Putter Shaft - 31 1/8" $40 - Free Shipping Continental US. $20 International
  5. Mjr. D

    Longest 3 wood

    It's fantastic. Long as s**t and feel is excellent. Tourstage 12.5* they came out with 4 years ago hit absolute bombs too.
  6. Mjr. D

    SOLID GATE by Benock

    Pretty slick. Let's get a video up!
  7. Mjr. D

    Miura MC-501 / IC-601 / MG-S01 Tour

    eeeeeeeeh... So so.
  8. Mjr. D

    Putting Aids

    I'm going to pickup the Eyeline Putting Mirror as soon as I get back home. I think it has everything anyone could possibly need all in one package. There's a bigger one and a smaller, more portable one. Thing I like about them is you can nail your setup perfectly every time. Will really help with consistency in the setup, which for me, is half the battle.
  9. Mjr. D

    VA Composites

    My personal opinion is that Diamana requires more swing-speed and more aggression for their shafts to perform at their best. More so than Fuji and Graphite Design. Might be the reason... Might also be the reason Mitsubishi is my favorite shaft company. They just work for me.
  10. Mjr. D

    VA Composites

    Ya, I've pretty much tried everything and I don't think most of us on here (myself included) would benefit spending $800 on a super exotic Crazy shaft over $400 Mitsubishi, Fuji or Graphite Design, but something tells me logic doesn't take the place of addiction on this forum. Count me in. Side note: Quadra, in my opinion is the most underrated shaft company. Fantastic shafts.
  11. Mjr. D

    VA Composites

    Just what golf needs, more shaft offerings! TPT, the one Justin Rose is now using, says they're the best. Everyone says they're the best (eye roll).
  12. Interesting... https://mygolfspy.com/mygolfspy-launches-in-japan-and-korea/
  13. Mjr. D

    Benock World has Arrived!

    I love that one.
  14. Heads only although I had the modus wedge shafts I'm selling, in them before. If you want I can sell you both...
  15. Mjr. D

    j-beam driver heads......,

    ZY-11 is the lowest spinning/launching head I've ever hit with the TaylorMade SLDR 430 right there with it. I can't imagine anyone needing anything less than a 10.5 loft if they pair it with a mid/low spin/launch shaft. I couldn't even get my 8.5 ZY-11 in the air.
  16. Been reading a lot about inserting wooden dowels into the shafts of your clubs to dampen vibrations. It's supposed to soften the feel of the clubs and make contact more solid. Does anything have experience with this? Is it worth it? Thanks!
  17. Interesting. I've studied this topic a lot in the last six months. As with most things, there are varying opinions. Most "experts" think there is something to FLO'ing but not much to finding the spine with a spine finder. They say they lie to you. If you do believe in all of this, most "experts" agree that S1 (Spine 1 - stiffest part of the shaft) should face straight up and N1 (neutral 1 - most stable part of the shaft) should face down the target line. N1 and N2 form a 180* line and S1 and S2 form a 180* line through the shaft. It's impossible to have a shaft with an S point and an N point 180* from each other. For me personally, I don't have a frequency machine so I have to rely on FLO'ing by pulling the shaft back and releasing it by hand and I find it very inaccurate. Depending on my pull and release, the shaft can oscillate clockwise or counterclockwise. I do however use a spine finder and to me, I can absolutely feel what part of the shaft has the most resistance and I install the shaft with the stiffest direction facing straight up, to prevent shaft droop coming into impact. Most "experts" say shaft droop will cause more mis**ts that anything else, so it makes sense to have the stiffest part of the shaft pointing up, to counter this. With all this being said, it might be complete nonsense. I just figure if I can do it, and I enjoy it, why not? But with most things in life, to each their own.
  18. Mjr. D

    Putter head materials

    Best feeling putter I've ever used, by far, was a Bettinardi BB2 DASS with a copper plating and 3 sound slots. I've never rolled anything that felt like that thing. SM490 is also very addicting, especially with the Muziik putter shaft.
  19. Mjr. D

    Putter head materials

    Wow! Impressive. So what's your favorite feel metal out of all of these? What's the softest? Hardest?
  20. Mjr. D

    Benock World has Arrived!

    And for the record, Gold's Factory never milled their own putters, right? They just modified blanks and other company's putters, correct?
  21. Mjr. D

    Benock World has Arrived!

    Indeed!
  22. Mjr. D

    Benock World has Arrived!

    Great post. Very interesting. What is the difference between SUS303 or SUS316L? Are these the only metals he uses? Thanks.
×