Mjr. D

Tiger going to be using this?

I have a G-Field #4. See my posts.

That's Canadian currency too. So only about $345 US. Hell of a deal.

Great article G.

I have a set of Miura baby blades, as well as a set of Epon Technity "tour spec" irons (not sure what the tour spec engraving changes from the normal set) and i'm planning on buying a set of Miura MB-5003s. Does anyone have experience hitting the baby blades, the mb-5003s and the new Epon AF-Tour blades? Feedback please. My take: The Epons are shafted with Nippon Super Peening Blues and the Miura Baby's are with Dynamic Gold X-7's. I wanted the Miuras to feel better than the Epon's but they just don't. I don't know if it's the shafts in the Miuras (the X-7's being very rigid) or what, but the Epon's just have that "perfect" feel that i haven't felt in another iron to date. They're very similar in feel to the old Epon X-wedge in the copper finish......... best feeling club of all time in my opinion. I have yet to hit the Miura MB-5003s and the Epon AF-Tours. If anyone has hit these two as well as the Miura Baby blades and old Epon Type J's....... please chime in!

I bought a set of epon iron covers from a guy in Australia (super nice guy) and he got into telling me about different club heads and shafts. Anyway, this driver came up. Apparently it just won the Japanese Long Drive championship. Well actually, the guy using the club did, but obviously the club is the reason why It's called a Team Yoshimura PT 435 Tour Project. I couldn't find this specific driver but this is their website http://www.team-yoshimura.com/english/index.html Anyone sicko out there have any info on these guys? Good?, suck? Great?

Sure does. Thanks very much!

Please PM me if you have or can get any of these items. I'd really appreciate it. Thanks.

Thanks. Know where I can find an Onoff towel to go with it?

I'm looking for a lightweight stand bag with a pull handle like this one. I know Onoff has their 2009 stand bag that looks similar to this but it doesn't have a pull handle like this one here. Any idea? Suggestions?

Hey. It doesn't actually state the loft, it just says "4" or #4. I would guess it would be around 23* since that is standard for a 4iron/hybrid. I'm also not sure of the hosel diameter. I had a Matrix Xcon hybrid shaft in it and it fit fine though.

Supremely nice putter. Perhaps up the exposure comp on the next round of photos though......... kind of dark I just played my first round with my golds.......... outstanding putter. Soft and rolls it incredibly. Love the blue on yours.

Unfortunately for whatever reason, i can't upload all the images i'm trying to on my other sales post on here. Therefore, please have a look and let me know if you'd like me to send you pictures of any of the items. I have a Roddio shaft, premium zone putter, epon grips, Gauge Design hybrid, graphite design hybrid shaft, etc, etc. Everything is in excellent shape. I really need to sell it so i'm definitely open to making a deal. Please take a look at my in my OTHER POST - http://forum.tourspecgolf.com/t28439.html#entry155207 on the BST forum. Thanks.

I'm using a Matrix Ozik F7M2 LTD right now.............. spectacular shaft. Very VERY accurate. Low, penetrating flight and good distance. It's a different feeling shaft than anything i've ever used. Almost feels like a hard rubbery compound. Hard to explain.

Awesome advice guys! I really appreciate it. Blader X.... you are one of the most selfless guys i've never met. Always looking to help. That's awesome man. Really appreciate it!

If you move the ball forward or back, depending on the club you're using, are your hands supposed to move back and forth as well or should they stay at the same place no matter what club you're using? Another way of explaining it is....... are you supposed to have your hands opposite your left inner thigh no matter which club you're using or should your hands move back in your stance, the further back the ball is positioned? The result being....... with a wedge your hands will be a fair amount ahead of the ball....... with a 3 iron, even and a driver, just slightly behind the ball.

The dump where I live is starting to show signs of life........ kind of, so I figured i'd bundle up and hit the range and try out my new wedges. For the first half of the session, i was hitting the ball very well........ then disaster struck and it went to hell......... still trying to figure out why........ been fighting this the past two seasons. Anyway, I just wanted to give a big Shout out to none other than Epon. I know everyone pumps their tires on this forum but there's a reason for it: these wedges are absolutely stunning. The feel is the best i've ever experienced..... spin in extreme without being detrimental and the look of them is, at least to my eye, excellent. I've tried many wedges from Fourteen to Vokey to Cleveland to Yururi to Tourstage and Ping and so on...... even the X and Technity wedges from Epon. These feel like the X with the Technity spin. Best i've ever hit......... easily. Highly HIGHLY recommended. Now i have a question for you. Since i can't find the forum for swing talk i'll post it here. When my ball striking and therefore goes to hell, i notice a few things. I start to make a divot very far behind the ball, i hit the hosel....... even when my grip is extremely strong (not pressure but style)..... my ball just goes right and slices about 80 yards. When i'm doing it right, i'll hit the ball a little thin but dead straight, very high and long. Now....... what is going on? Any idea what causes a shank-like shot, a long divot that starts well before the ball and a slice? Please help me out! I can't deal with another year of this.

Please have a look and PM if interested. Thanks. ***100% EBAY FEEDBACK***. Let me know your location and i'll quote you on a shipping price. Will ship out same day if possible. **All shafts professionally pulled.** 1)Gauge Design G-Field GFT-UW (4 iron hybrid) - Awesome, rare and beautiful club in very good shape - $75 2)Graphite Design UT-95 X-flex (feels softer than X) - 39 1/2in long - Arguably the best hybrid shaft you can buy. Mint condition - $60 3)Mitsubishi JavlnFX H80 - Regular flex - Brand New - $40

I just bought them with the factory mitsubishi javelin FX shaft that comes with them. If i were to put in graphite i'm going with a Matrix Ozik HM2 shaft. I had a graphite design UT-95 in my old bridgstone hybrid and it was a fantastic shaft. Reason i want something different is for even more control....... that's why i'm thinking steel. I just don't know if a 130 gram shaft in a hybrid, even if it's more of a iron shaped hybrid like the Adams is too heavy or not......

I just bought two adams idea pro gold hybrids and I was wondering what weight of shaft i should install in them. My irons have 133 gram shafts in them and the adams hybrids are more of an iron-like hybrid than a wood-like hybrid so i thought matching the weights would be the way to go... Is this a wise thing to do or is a 133 gram shaft in a hybrid of any kind too heavy? Thanks.

Oh and the J33 drivers are some of the lowest spinning in golf.... so i'm assuming it carries over into their fairways and hybrids...

If not, any idea how the Bridgestone J33 or J36 hybrid would compare? I know Bridgestone makes clubs for "players"........ not that i fit even close into that category, but i do have a problem with too much spin and too high of a launch so it's a good fit for me. Any idea?

Any info on the new Graphite Design FS series as seen on their website...

Cool thanks. So where do you get one of these X-UT's?

Thanks guys. I appreciate it. I've heard good things about the Nickent Hybrids but they're just so damn ugly looking (IMO)......... the green slime on the sole...... Maybe i'll swallow my pride and give it a shot nonetheless.