Precision

Chris, will it have a carbon-fiber crown like the :tm: XR-05 CTi?...

:tm: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...me=STRK:MEWA:IT http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...7135992633&rd=1

Shigeki Maruyama MR-23 Cavity Back Specs: .355 taper tip #2 #3 #4 #5 #6 #7 #8 #9 PW Lie Angle 60.5 60.5 60.5 60.5 61 61.5 62 62.5 63 Loft Angle 18 21 24 27 31 35 39 43 47 F Progression 4.15 4.15 4.15 4.45 4.45 4.45 4.45 5.25 5.25 Length 39.25 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25 Weight (S200) 409 412 417 423 430 437 445 451 459 Weight (X100) 411 414 419 425 432 439 447 453 461 Balance :tourstage:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...me=STRK:MEWA:IT http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...7131204331&rd=1 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...7128989226&rd=1 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...7108909445&rd=1 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...7126466675&rd=1 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...7112761838&rd=1

Brian, I've linked numerous pictures from your completed eBay listings on BSG & TSG. IMO, I've helped gain exposure to your store from my posts recently. :o

PM Sent :callaway:

Chris, is the set the same swingweight throughout or do individual irons vary? :mizuno:

BabelFish Translation... :-D *TaylorMade r7 quad TP プチチ…ーン According to notice it tried doing. Those where this time it tries doing, the weight which is installed in the TaylorMade r7 series, are screw system, if the TV CM sort of usually that r7 sound doing "click" it turns to the point of, it is locked securely. R7 TP Koudaka it is excessively and sound says does not do with, to hit, depending upon the place there are times when extreme metal sound does. It was then whether thinking, somehow cannot put out the same effect as the rubber material for the vibration absorption which is installed in the TourStage New X-DRIVE series of BS with r7. The occasion where you screw in, it meaning that the weight has covered around the screw, it does, but as for that weight there are no times when it comes off. But if you do not hold down, we are not fixed, move. When you insert those like the rubber, you thought that perhaps, with with the notion that where you say, in this weight and the part where the driver head touches directly what what the effect is produced. However when excessively thick ones are inserted, the effect of vibration absorption it becomes high, but because the danger of coming off it is, the extent which it becomes deformed to the utmost thin those of the eye, or when installing by tightening, we had decided to search the high soft rubber. Then the fact that it is found is something under, (it supplied at all foam/home centers). The left does not touch with those which the nail and the screw etc. lock directly, with those in order the sea urchin to do, processing easily to do so was the thing relatively, (1 3 Yen). Middle ones were in the counter around the water, it is the gasket, (about certain 100 Yen). It is extreme right was in the counter which sells the rubber board and the like, the bush rubber (with 10 about 250 Yen). Weight of weight of 10g neighborhood because the opening is not left over in the weight part and the installing part of the head, had decided to insert the extremely small rubber tube, (middle ones of the photograph above). In addition 2g - Because the weight of 4g considerably is a space in the center section of weight, we had decided to attach the bush rubber of the kind of size which it sticks to the space which inserts weight if possible (those on the right of the photograph above). It is in a state where the respective rubber is attached. The left is the place where the bush rubber is attached 2, but it is too large just a little. The right has placed the rubber in the weight of 10g on extreme left, but it is exactly good size. Because as for the one which is not TP there is only the weight of 10g and 2g, when this rubber is installed, a little it becomes heavy. As for 10g particularly as for big change it was not. -> -> The top is original weight and weight after the installing. The weight of 2g 2 attaching the rubber, 3.2g. The weight of 10g putting the gasket, it was 10.1g. If point to the change of excessive weight you do not want, if of a little size searches the gasket small awakening, you think that the installing method also those of 2g being similar to those of 10g is possible. Well, being to try installing promptly, it does, when, but first almost being to keep entering, it does the screw to the same position without problem, but 2g because the bush rubber was inserted 2, became rather narrow state, resigned and closed the excessive rubber tore. As for this while shaving the part to which one time removing and the rubber are too large with the nipper you arranged size. And when it tries installing, the original it was possible to the same position without problem to tighten. Because weight of heavier one extremely just inserted the thin rubber in the part where it touches, it could install normal state and what not to change. And it tried comparing the feel before the installing and the feel after the installing, but the practice companion, by your are around sound bodily sensation could change of course. In addition but, perhaps, spirit of the ball the favor eye, the kind of air which extends did. Actually if in this state, you try with usual course, you think that the result is produced clearly. In addition, also the feel which is transmitted to the hand became feeling good ones. Simply, because the sphere whose drop which usually does not come out feeling is a little high appearing shot was several, it is necessary to verify whether or that day which are something due to the fact that that changes really rpm of the ball accidentally is. It tried doing after a long time with the just a little idea, perhaps, but it is unexpected and the effect. As for the method which has r7 being to be チ…ーン which it is possible for several hundred Yen as for the value which it tries trying you think that it is. In order not to insert those where the giving ぐ れ, tightening the screw is left over and going accurately, is too large, please pay attention.

Chris, do the :gauge: MB's have a similar shape to the :tourstage: MR-23 US Spec cb's & which has a better feel @ impact?

To be specific, I cut 4 small strips of GolfSmith High Density Lead Tape 1/2 X 100 & used the back of a pen to firmly mold it on. The swingweight went from a standard D2 to D4. My rhythm & timing has benefited greatly from the overall heavier swingweight since I can now "feel" the clubhead during my swing . Due to more weight in the head, my carry distances are about a 1/2 club longer as well. I highly suggest you experiment tweaking with heavier swingweights if your Gauge Design Gaf1's are D2. Besides, the norm on Tour is D3-D5. The wedges are the Titleist Forged Limited Set I purchased from DemolitionMan. He put a custom satin finish & regrooved them to the maximum allowable depth. IMO, the only wedge that spins more than my 59° DD wedge is the 60° Vokey Spin Milled...

The CGB 4 iron replaced my 3 & 4 MR-23 cb's. I custom ordered it with a DG X-100. It's a little tough to hit off tight lies & the deep rough due to the semi-wide sole but a great performer nonetheless. If I were you, I'd just purchase the R.A.C 19° TP driving iron from Chris instead of altering a CGB 3 iron. The Vijay Tour Bend MOI is standard @ 35" & has an E7 swingweight due to the tungsten backweight & screws. http://www.tourspecgolf.com/catalog/produc...products_id=437

:tm: With the 2 Gram Weight Cartridge being standard, here are the changes in Swing Weight/Balance using the other optional weight cartridges: 4 Grams = +0.8 SW PT, 6 Grams = +1.6 SW PT, 8 Grams = +2.4 SW PT, 10 Grams = +3.2 SW PT, 12 Grams = +4.0 SW PT, 14 Grams = +4.8 SW PT :tm:

KAPALUA, HI - JANUARY 6: Tiger Woods (L) and Vijay Singh putt on the practice green before tee off for the first round of the Mercedes Championships on January 6, 2005 at the Plantation Course in Kapalua, Maui, Hawaii. Side note Notice how TW aligns his Sharpie mark toward the hole. What does everyone else do? For me, I Check-Go/Line-M-Up a sleeve of HX Tours before the round & align the Sharpie line toward a specific spot on the green facing horizontal towards the sky instead of vertical towards the hole like TW. :cool: Don't use the permanent marker that the Check-Go comes with. Use an erasable pen or marker to mark the sweet spot... Wipe off to your desired line length & use the Line-M-Up/Sharpie marker to draw your line...

:prgr: :cool: :prgr:

Those are NOT Pro Combo's, those are Split Cavity prototypes that are not going public, I have previously posted details of new Nike clubs.

:logo: http://www.golf-today.co.jp :logo: Does anyone have an annual subscription to this magazine? How about taking scans of the pics on a monthly basis like TourSpecGolfer :cool:

:cleveland: HONOLULU, HI - JANUARY 15: Vijay Singh of Fiji watches his tee shot on the 16th hole during the third round of Sony Open on January 15, 2005 in Honolulu, Hawaii. :callaway: HONOLULU, HI - JANUARY 15: Brett Quigley of the USA watches his tee shot on the eighth hole during the third round of the Sony Open on January 15, 2005 in Honolulu, Hawaii.

CompNT 65 - 3.1 torque 64g MID CompNT 85 - 2.7 torque 85g MID >Combines revolutionary carbon nanotubes into the resin system to dramatically increase the strength properties and improve uniformity of the carbon fiber orientation throughout the system >

X-18 PS X-Tour

Maru's personal prototype of the ZO:MO Zero... :paradiso: http://www.zomo.jp/press.html :paradiso:

:tm:PM sent:tm: PayPal sent :cool: