FairwayFred

This is a very very rare KZG Gemini with a 1*-2* open face angle. It is even a black head. It is the smaller Gemini 355 head which imo is one of the best looking pear shaped drivers on the market. Of course you all know how forgiving these things are. You also know how hard it is to find an open face on one. The shaft is a Fujikura Tour Only TrTi Stiff flex which is about as good as it gets for shafts. Specs are 95 grams, 3.0 torque, mid/high flex. It has a titanium weave going through the shaft for added stability. The club has hit about 30 balls and is in excellent condition. I will ship this driver anywhere in the USA for $400. Send me an email a PM or email to [email protected]

3-PW TourStage MR23 US Spec CBs. These beauties were Blueprinted by Joe Kwok with softstepped S400s. They are 1/4" long, 2* upright and D4 all the way across the board. The work on them alone cost over $500. They have seen some use but have been lovingly taken care of. They are about an 8/10, just some normal bag chatter and wear. No big dings or gouges or wear or anything like that. I will ship them anywhere in the USA for $725. As always if you are not happy with the condition of them return them for a full refund. Send me a PM or email to [email protected]

I like the demo club idea Chris. Put me on the list too. Also, look for a simular TSG Demo program for Scratch Irons in the near future. :)

We have made ALOT of wedges since we opened last October. Amazingly, in that whole time we have only gotten 1 order for Polished Chrome wedges. I knew that we would do more Satin Chrome wedges than Polished but I am just amazed at how many more. These 2 Polished Chrome wedges just got finished and shipped out so I figured I would take a couple pictures for you guys. I took about 200 pictures and even with my tripod this is the only one that came out even close to good enough to post. I had a serious problem with glare. LOL. :lol: I think that they turned out great. 8)

About 8 weeks ago our 3X Black finisher retired. The person that was doing our finish since then did a good job but the finish was not as good as the old finish and not good enough for Scratch Golf. While we were using this other person in the meantime I was also searching the country for the best 3X Black finish available. I am very happy to say that I have finally found it. Our new 3X Black finish looks incredible. It is much better looking even than our original 3X Black. It is a nice matte flat black color. It looks more like a black satin chrome than a black oxide finish. It is very durable for a black finish but as with any oxide treatment it will wear and rust with use. We would like to refinish every wedge that we sent out with the old 3X Black finish to this new much improved finish free of charge. I sent emails to everyone with an old 3X Black wedge explaining this but if there is anyone out there that did not get the email please email me at [email protected] so we can get your wedges refinished. Below are pictures of a couple wedges that we made for John at Gripmaster. His wedges are full grain with a sharp, flat sole and no relief. :)

SOLD

Brian, The biggest difference is the grind. It has a more heel and toe relief and less trailing edge relief especially in the middle. The sole has less camber and is sharper. The shape is a little rounder too.

Deal Pending

Price dropped to $625 shipped! Send me a PM

Skink, I do not think the shaft is tipped at all. It was installed by TourTuned to play to a true S flex. It is a really sweet combo.

9* KZG Gemini 395 Blue Head, slightly closed, Fujikura 771TA Stiff flex, 44.5", D5. This is one INCREDIBLE combo. As long and as straight as can be. This club has hit 5 balls and is better than 9.5/10. If I told you it was brand new you would definetly believe me. I will ship this driver anywhere in the USA for $400. Send me a PM or email to [email protected] As an added bonus the buyer of these irons has the oppertunity to purchase some custom Scratch wedges for $125/$150 instead of the normal $150/$175 price.

That was you in front of us!?!?! You must have been the one that was continually bombing it 100 yards past your playing partners and then standing by your ball nervously with your arms crossed while they (that one in perticular) struggled to find and advance their ball. You should have said hello! That really is an amazing coincidence, us both playing the same ProV1X PRACTICE #6. :lol: I was very happy to see that the ball in the hole was the same model and number with the same stamping as mine so I didnt have to go looking behind the green in the gorse. Plus I was afraid the nervous guy with the crossed arms might get mad at me for hitting into them on the tee....................

This is one of the new 2004 Zodia wedges, the Premium Version not the 2003 KM Tour wedge. You can see pics at http://www.zodia.biz/premium.htm This is a 53* wedge that is standard length and lie. It has been used slightly. The black finish is still pretty much intact. There are just a couple small ball marks on the face. I will ship this wedge for $200. Send me a PM or an Email at [email protected]

These are one of the best forged CBs ever made. Many have called them the "Holy Grail" of irons. This set is 3-PW and is in solid 8/10 condition. The shafts are X100s and the lengths and lies are standard. I will sell this set for $675 which is an amazing deal. Only a couple months ago these were hard to find even for $1000+. Send me a PM or an email to [email protected] As an added bonus the buyer of these irons has the oppertunity to purchase some custom Scratch wedges for $125/$150 instead of the normal $150/$175 price. :D

We can make you a 46* wedge without much of a problem. Since we are grinding it to spec anyways it will not effect the bounce angle at all. The only difference is that it will add a touch of offset by bending the raw head strong.

Count on it. My whole family lives in Michigan and I have alot of friends in Kalamazoo. My brother went to Western. I actually have a 24 pack of assorted Bells in my fridge right now thanks to a visiting friend from the Zoo. :D He even brought the really good stuff Sparkling Ale and Java Stout to name a few. I have never played The Dunes but have always wanted to. I will let you know when I plan on being in Michigan next and we will set it up.

Ethan, Our facility is located in Eugene Oregon. We are in the process of moveing to a new shop but are fully capable to custom fitting someone in person should they choose to come get fit. If you have any questions feel free to email me at [email protected]

To my knowledge this was the first hole in one with a Scratch Golf club. :) However, there have been MANY chip ins with our wedges. Almost everyone that purchases a Scratch wedge chips in with it in one of there first few rounds. Its amazing what the correct sole grind will do to your shortgame. :D 8)

For now, here is a pic of my hole. :D #14 Pacific Dunes BTW, this pic is taken from the Red Tees. :lol:

Thanks alot guys! 8) Its all about the Scratch Tour CBs. First shot I have ever hit with the 5 iron, first hole in one! :D I am going to post some pics of my new Satin Scratch Tour CBs as well as a pic of the hole in a new thread later today. Celebrating was done at my house, we had a few bottles of wine, some micro brewed beer from Bell's Brewery in Kalamazoo Michigan and some hard liquor. :lol: Needless to say I am getting a late start today! :lol:

***DEAL PENDING***

Price Dropped to $900. You will not find a set of these irons for less money than this and they are confirmed the real thing used by a former major winner. Send me a PM.

SOLD

BTW so you all know I worked it all out with the buyer. Thanks to all of you for your advice. :)

Only 1 left!!