pucci

suppose, but I was told the original nc1s had a small topline and I found it like a brick :( , compared to the xblade 2 any hows - not that I would not consider any of the above, but think my next set will eitehr be tm mb tps or j33b....

all lovely, just wish the toplines were smaller :(

pm sent

they are so sexy, kinda really want a set - just not sure!

ok kool - thought they were a once gone they're goen jobs....don't have to sell my left bollock yet! (someone buy my sodding nc1s lol)

its funny, my dads fluent in Japanese - I got him to read that page and he said there was no mention of limited edition? Any idea why?

how does the topline stack up against the original nc1s? - looking at them its very similar....would you say the xblades have a thinner tiopline? thanks!

need a topline pic desperately chris- if thin enough will order now!

gay, so want those forged ltd.ed ones - no money - cant sell gauges - :(

someone buy my guage nc1s so I can order a set :(

1150s are gr8, prefer over my old x100s - but they were in my mizuno mp33/37 combp set and wasn't overly keen on the blubs ( got x100s in my maru specs and they are solid) - if I had to choose would go 1150s - going to go m266v in the xbaldes( you've sold me - just need to sell nc1s first :()....

When you say the x-blade 2 I assume you mean the blade (not cb)? - I used ot have some nike blades, which I now miss, and then went to mizuno mp33/37 combo - preferred nikes, now on guage nc1s, I am now stuck between the xblade 2 blade and cbs - leanign towards the blade.......with the probably the above shaft - currently got 1150 Xs in the nc1s and they are pretty good.... - jsut want more feedbakc on the xblades please :) tia

would you recommend the cb over the blade? thanks

think I will try the yes carolyne - can get it sooner - ah the impatience of youth :) - if that fails me will bear the tera in mind ;) thanks gents

Looking for a center shafted putter, so far like the look of the zomo v11, yes amy and Carolyne... anyone got any other suggestions? Thanks!

my maru specs are deadly - take the skin of range balls :/ And destroy my bridgestone b330s (literally dead after a full wedge shot - its wrong!)

Here are a few piccys - didn't bother taking pics of the mizunos as they are gonna be sold now Got a bridgestone stand bag - but again couldnt be bothered- just a quicky- driver- bridgestone J33P 8.5 Fujikura 757 tour spec X stiff 3wood - Bridgestone J33 15 grapalloy pro launch 95X 5 wood Guage design fujikura vista pro 90 X 3-PW Gauge Design NC1 nippon X 1150s SW&Lob - tourstage Maru spec 53 and 58 Putter scotty studio 2.5

first impressions - these things are great! I swung like a dog tbh - played ok on the front 9 - but plain sucked on the back anyways- I was very happy with the clubs, highlights were- 6 iron from 179 yards to about 9 foot ( missed the sodding eagle put :() then later in the round a 3iron from 185 ( bloody links course) which felt sooooooooooo good and reacted just how I wanted it to. Doubt my mp33 3 iron could have compared to that shot. Overall the long irons are fantastic - 3-5 keepers straight out the block. 6-PW need to practise with them - feel solid - but not quite got the same 'through the ball' feel as my mp37s.... first impressions would be a 8.5/10 - which is nice when I swung as bad as I did. ( don't get me started on the putting;)) Will get some pictures up of my bag etc this weekend ( may do '2 bags' one with mizunos to compare Take it easy!

I bought these heads (slightly used 9.2/10) of Chris in December, along with some NSPRO 1150 X's. I didn't get them made up - went to Mizuno with my combo mp33/37 set and got 'custom' fitted - turned out I was Mr Mizuno (i.e standard everything! - except X100 shafts). So basically my current set was 'perfect' so thought screw it - stick with them sell the gauged and get my money back ( semi-broke at the mo). So since February I have been trying to ebay/sell my heads and shafts with no joy - so this weekend I though screw it - lets get them made up...so I did - first reactions - firstly the topline is thinner than I had first thought - dunno why - but holding the head in my hand looked huge - but once made look pretty sweet ( no as thin as my 33/37s- but not unworkable). secondly these clubs are beyond pretty, got a ferrule with a single red line round it and man do they look good- inspire confidence! thirdly - fingers crossed this could be the best thing ever for me - i.e not selling them - - they are so pretty - think I said that all ready....but man they look good. So, tomorrow I am of to Royal Saint Georges for a blast with them - going cold turkey so to speak - will give a review / pictures after ( possibly wednesday as its going to be a long day!

Had 3, but none in competitions :tsg_smilie_money3: One was on a short 265 yard par 4 :tsg_smilie_smile:

thank you - yes thats what I was trying to say :) So - that would be considered neutral, then mocving the crease North (i.e more to top) - would make the grip stronger? thanks

just bought 'the 7 laws of the golf swing' by nick Badley - got some interesting images, semi-cleared it up for me (like the idea of introducing the lcub from north-east if your facing north (on the vertical)) Thanks gents

thank you, that does help, I think the problem I suffer from is that the angle the club runs at becomes to straight when I have the pad on top, I have seen lots of images with a line drawn on the glove with the grip intersecting the first joint of thei ndex finger and running over the base of the little finger ( or there abouts) - now, is that view from the top, i.e the hand underneath the club, or side on? - so if the logo is on top of the club, when you do it should the logo be on top of the line, or rotated so its nearer the line? And when you say it exits on the crease, I 'know' what you mean, but agian not 100% sure on the orientation , is the crease below the grip, to the side etc? - when I try below the pads to the side, when its to the side the pads mostly on top, and when I try above its alien to me! (hope this makes sense! - could take another picture) Absoltuely no idea! :tsg_smiley_laughatyou:

I am finding it very hard to get back to the ball, I use the 'current' - where the pad is on top (first picture), but I don't have the same movement, where as the one I think I should use (second) - with the pad to the side slightly feels more free - and the club becomes an extension of my arm. The extreme (3rd) I did just for the hell of it! - ignore my crappy pictures - but as they say - a picture paints a thousand words - and thought it would show my problem...

right I am of to florida tomorrow morning - in 8 hours actually! so - if someone in America is interested - now is your chance, I will sell the NC1 heads for $800 plus shipping (obviously internal - so won't be too much!)- thats it - this is for the heads only! - the Shafts are still availible- but to big to take with me (heads will go in my suitcase nicely)- as stated you ahve about 8 hours to decide- after that - not sure (suppose I could take them anyway and get them made up out there...) Need them oney really! - so pm if you want them! Need to know by 5am GMT though.