TourSpecGolfer

Kyoei is himeji handmade the classic way meaning they dont know the CG locations or optimize for spin/distance/trajectory. They forge, grind and finish all under one roof but no where near the tech, precision, quality and design of the 7 CB and MCB. I must do a break down on the differences in the manufacturers in a separate thread. SEVEN CB and MCB are on an entirely different level. Even superior to rory, dj, j.rose TM full cnc irons by TM.

This brand is not “run” by Fujimoto dispite who owns the trademark. Its a partnership setup and partially managed by their partner in australia ebisu golf. The sad move is ebisu set this up and doesnt even own the trademark in their own country...

This is beautiful hand engraving like classic fire arms are done. Benock is full on CNC to the highest level.

Most OM heads are based on 10-20 years old designs. The factory doesn't know the CG height and depth locations which is vital. They do not have the spin rates optimized with the CG meaning performance is a shot in the dark especially distance/spin/trajectory. A set of open model heads 4-PW no matter what it has should cost maximum 1200 bucks. Ideally, you want original design if your investing in a new set.

Head to the blog for a ton of pics - http://blog.tourspecgolf.com/the-new-ryoma-iron/

It's spin welded hosels not necessarily considered a 2 piece head although technically it is. yes, limited to 200 sets. We have secured some.

Sure thing. give me some time and I will.

we have been kindly asked to remove these pics...:)

Do you guys really want to see more anser style putters or would you prefer more unique designs?

It's gonna take some time but I think this driver can create a following. It's stability and distance is outstanding!

I will post pics of the CGS Orion iron later this week. Then you can see 3 different products made with the same head and we can discuss how they differ if u guys like.

Uh Ya, this is the very oldest Seven CB blank but not in S15C... This is also the same head as the CGS Orion Closer CB and many others have used over the years. Fujimoto Golf is Australian. This is not the factory themselves who run this. The factory direct owns Believer, Adject etc.. It used to be available in S15C until Oichi sold out and will not produce again. All that is left is SS400 now and then this iron is likely not to be produced again. Oichi has had these heads a while. It is the smallest of the Oichi CB blanks and is not very forgiving It is also very limited in what a grinder can do to its shape. http://blog.tourspecgolf.com/seven-s15c-ss400-forged-cavity-blade-irons/ http://blog.tourspecgolf.com/seven-prototype-v1-5-ss400-cavity-blade/ http://blog.tourspecgolf.com/2016-seven-cb-iron-limited/ Seven used Fujimoto for a short period and then because we needed to level up the product we moved the grinding to Shinagawa and the CNC work to Kitada. Then we did all we could with open model heads and decided to jump into full CNC.

http://blog.tourspecgolf.com/introducing-the-bb4-driver/

So True! LOL

100% you can. and it can be almost 3-D and SUPER detailed. We have customers that have the craziest benock putters and one guy in particular who has maybe a dozen all over 5k each with the craziest 3-D designs all over the putter not just the sole. bullets, skulls, swear words, guns, spiders, you name it. Every putter I offer him 100 bucks just to post a photo and he says no...

This is BENOCK, whatever you want it to be ? standard spec is 350g and 360g. Okuda-san will re-design the CAD to any head weight. Balance Angle is 30* Lie 71* 3* Loft 14.5mm / 10mm - Height/Depth

We do sell the MCB 54 and 58 now.

brand new! This is from 2004/2005... It's Brand New! The 65g Stiff Flex was the most desired Anyone remember these?

Guaranteed! Ive seen them maxxed out at around 9k lowest is 1k this is less than 1% of golfers i think.

The 1/2 offset swan neck alone gets me giddy. While I love the classics I am tired of so many brands producing similar shapes, that said I still buy those familiar designs. So many recent neo mallet's feature gaudy colors and are made in China of aluminum and plastics. Even the guys on the PGA tour are getting Frankenstein cut neck welded re-painted bent spec'd putters. Benock's capabilities are every tour players dream.

Yes we can.

DLC

I am a big fan of Titleist. The VG3 is always awesome. Both the Type-D and Forged. This CNCPT iron is likely a 2 piece real cnc milled iron with internal weighting (just a guess)

Under the DLC is SEVENs awesome chrome finish. It wont rust and +DLC is more durable that stock. PXG claims they are the first to use it in golf yet JDM fanatics know it's been used in Japan for around 10 or so years i.e Kitada-san and perhaps a couple others. After many many whacks, you will see thin silver lines revealing the chrome plating but only from rocks n hard stuff. DLC does make your clubs more durable against smaller dings and scratches. Feel is a little firmer but I would still rather have the DLC than not. This is the good stuff Japanese DLC and it isn't cheap. 120 per club more. 50 head minimum batches. smoked or mirror are the options. I will post more pics.